Rohm DTC113ZUA 100ma / 50v digital transistors (with built-in resistors) Datasheet

100mA / 50V Digital transistors
(with built-in resistors)
DTC113ZUA / DTC113ZKA
 Applications
Inverter, Interface, Driver
 Dimensions (Unit : mm)
DTC113ZUA
2.0
 Features
1)Built-in bias resistors enable the configuration of an
inverter circuit without connecting external input
resistors (see equivalent circuit).
2)Each bias resistor is a thin-film resistor. Since they are
completely insulated, the input can be negatively
biased. The insulation also eliminates most of the
parasitic effects.
3)Only the on / off conditions need to be set for
operation, making the device design easy.
0.9
Part No.
0.15
1.3
ROHM : UMT3
EIAJ : SC-70
Each lead has same dimensions
Addreviated symbol : 121
2.9
(1) GND
(2) IN
(3) OUT
1.1
0.4
0.8
1.6
2.8
(3)
(2)
SMT3
Taping
T106
T146
Basic ordering
unit (pieces)
3000
3000
(1)
0.95 0.95
0.15
1.9
ROHM : SMT3
EIAJ : SC-59
Each lead has same dimensions
Addreviated symbol : E21
0.3Min.
UMT3
Taping
(1) GND
(2) IN
(3) OUT
−
DTC113ZUA
−
DTC113ZKA
 Absolute maximum ratings (Ta=25C)
Symbol
Limits
 Inner circuit
Unit
DTC113ZUA DTC113ZKA
R1
Supply voltage
VCC
50
V
Input voltage
VIN
−5 to +10
V
IO
100
IC(Max.)
100
Power dissipation
PD
200
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to +150
°C
Output current
0.1Min.
0.65 0.65
DTC113ZKA
Code
Parameter
2.1
1.25
(1)
(2)
 Packaging specifications
Packaging type
0.7
(3)
 Structure
NPN epitaxial planar silicon transistor
(Resistor built-in type)
Package
0.2
0.3
OUT
IN
R2
mA
GND
IN
OUT
GND
R1=1.0kΩ, R2=10kΩ
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
○
1/2
2009.06 - Rev.C
DTC113ZUA / DTC113ZKA
Data Sheet
 Electrical characteristics (Ta=25C)
Parameter
Input voltage
Output voltage
Input current
Output current
Symbol
Min.
Typ.
Max.
VI(off)
−
−
0.3
VI(on)
3
−
−
VO(on)
−
0.1
0.3
V
II
−
−
7.2
mA
VI=5V
IO(off)
−
−
0.5
μA
VCC=50V, VI=0V
VO=5V, IO=5mA
Unit
V
DC current gain
GI
33
−
−
−
Input resistance
R1
0.7
1
1.3
kΩ
Resistance ratio
R2/R1
8
10
12
−
−
250
−
MHz
fT ∗
Transition frequency
Conditions
VCC=5V, IO=100μA
VO=0.3V, IO=20mA
IO/II=10mA/0.5mA
−
−
VCE=10V, IE= −5mA, f=100MHz
∗ Characteristics of built-in transistor
 Electrical characteristic curves
10m
5m
VO=0.3V
OUTPUT CURRENT : Io (A)
INPUT VOLTAGE : VI (on) (V)
50
20
10
5
Ta=−40°C
25°C
100°C
2
1
500m
200m
100m
100μ 200μ
500μ 1m
2m
5m 10m 20m
50m 100m
OUTPUT CURRENT : IO (A)
VO=5V
500
2m
1m
500μ
Ta=100°C
25°C
−40°C
200μ
100μ
50μ
20μ
10μ
5μ
2μ
1μ
0
Ta=100°C
25°C
−40°C
200
100
50
20
10
5
2
0.5
1.0
1.5
2.0
2.5
3.0
INPUT VOLTAGE : VI (off) (V)
Fig.1 Input voltage vs. output current
(ON characteristics)
1
1k
VCC=5V
DC CURRENT GAIN : GI
100
Fig.2 Output current vs. input voltage
(OFF characteristics)
1
100μ 200μ
500μ 1m
2m
5m 10m 20m
50m 100m
OUTPUT CURRENT : IO (A)
Fig.3 DC current gain vs. output
current
lO/lI=20
OUTPUT VOLTAGE : VO (on) (V)
500m
Ta=100°C
25°C
−40°C
200m
100m
50m
20m
10m
5m
2m
1m
100μ 200μ
500μ 1m
2m
5m 10m 20m
50m 100m
OUTPUT CURRENT : IO (A)
Fig.4 Output voltage vs. output
current
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
○
2/2
2009.06 - Rev.C
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of
any of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
R0039A
Similar pages