AP209 MMIC Product Features Applications • 50 ~ 3000MHz • GaAs MMIC • 43dBm Output IP3 • 13.7dB Gain • 24dBm P1 dB • Single +9V Supply • SOT-89 SMT Package • CDMA, W-CDMA Medium Power Amplifier • High Linearity Drive Amplifier Package Type : SOT-89 Description AP209 is a high linearity amplifier designed with GaAs MMIC in a low cost SOT-89 package. It is designed for applications such as GSM, CDMA, W-CDMA drive devices which require high IP3. Electrical Specifications (=+25℃, VDD=+9V&+7V, Test Freq=900 MHz) PARAMETER UNIT MIN TYP MAX TYP Gain dB 12 13.7 - 13.3 Input Return Loss dB - -21 - -20 Output Return Loss dB - -17 - -17 Output IP3 dBm 39 44 - 42 1dB Compression Point dBm - 24 - 23 Noise Figure dB - 2.5 - 2.5 DC Current mA 90 120 140 117 Supply Voltage VDC - 9V - 7V Thermal Resistance (Rth) ℃/W - - 40 - OIP3 is measured with two tones, at an output power of +10dBm/tone separated by 1MHz. Absolute Maximum Ratings PARAMETER UNIT MIN MAX Device Voltage VDC - 12 RF Input Power dBm - 10 Storage Temperature ℃ -40 150 Operating Ranges PARAMETER UNIT MIN TYP MAX Operating Frequency MHz 50 - 3000 Device Voltage VDC - 9 10 Case Temperature ℃ -40 - 85 Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] All specifications may change without notice 1 / 11 Version 6.1 AP209 MMIC Application Circuit @ 900MHz, Vdc=+9V Bill of Material PARAMETER TYP PARAMETER TYP C1 100 pF L1 3.9 nH C2 6.0 pF L2 18 nH C3 100 pF R1 0 Ω C4 0.1 uF OIP3 vs. Frequency 15 0 14 -5 13 -10 12 -15 11 -20 10 -25 800 840 880 920 960 50 OIP3(dBm) Magnitude (dB) S-Parameter vs. Frequency 45 40 35 30 800 1000 840 3.5 25 3 24 2.5 2 1 20 960 800 1000 840 880 920 1000 Frequency(MHz) Frequency(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 960 22 21 920 1000 23 1.5 880 960 P1dB vs. Frequency P1dB(dBm) Noise Figure(dB) Noise Figure vs. Frequency 840 920 Frequency(MHz) Frequency(MHz) 800 880 All specifications may change without notice 2 / 11 Version 6.1 AP209 MMIC Application Circuit @ 1800MHz, Vdc=+9V Bill of Material PARAMETER TYP PARAMETER TYP C1 2.0 pF L1 3.9 nH C2 6.0 pF L2 18 nH C3 100 pF L3 4.7 nH C4 0.1 uF R1 0 Ω OIP3 vs. Frequency 14 -5 55 13 -10 50 12 -15 11 -20 10 -25 30 -30 25 9 1700 1740 1780 1820 1860 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 45 40 35 1700 1900 1740 Noise Figure vs. Frequency 1860 1900 1860 1900 P1dB vs. Frequency 4.5 26 4 25 P1dB(dBm) Noise Figure(dB) 1820 Frequency(MHz) Frequency(MHz) 3.5 3 2.5 2 24 23 22 21 1.5 1700 1780 20 1740 1780 1820 1860 1900 1700 Frequency(MHz) 1780 1820 Frequency(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 1740 All specifications may change without notice 3 / 11 Version 6.1 AP209 MMIC Application Circuit @ 900MHz, Vdc=+7V Bill of Material PARAMETER TYP PARAMETER TYP C1 100 pF L1 3.9 nH C2 6.0 pF L2 18 nH C3 100 pF R1 0 Ω C4 0.1 uF OIP3 vs. Frequency 15 0 50 14 -5 45 13 -10 12 -15 11 -20 25 10 -25 20 800 840 880 920 960 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 40 35 30 1000 800 840 Frequency(MHz) 920 960 1000 Frequency(MHz) Noise Figure vs. Frequency P1dB vs. Frequency 5 25 24 4 P1dB(dBm) Noise Figure(dB) 880 3 2 23 22 21 1 800 840 880 920 960 1000 20 800 Frequency(MHz) 880 920 960 1000 Frequency(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 840 All specifications may change without notice 4 / 11 Version 6.1 AP209 MMIC Application Circuit @ 1800MHz, Vdc=+7V Bill of Material PARAMETER TYP PARAMETER TYP C1 2.0 pF L1 3.9 nH C2 6.0 pF L2 18 nH C3 100 pF L3 4.7 nH C4 0.1 uF R1 0 Ω OIP3 vs. Frequency 14 -5 50 13 -10 45 12 -15 11 -20 10 -25 25 9 -30 20 1700 1740 1780 1820 1860 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 40 35 30 1700 1900 1740 Frequency(MHz) Noise Figure vs. Frequency 1860 1900 1860 1900 24 23 4 P1dB(dBm) Noise Figure(dB) 1820 P1dB vs. Frequency 5 3 2 1 1700 1780 Frequency(MHz) 22 21 20 19 1740 1780 1820 1860 1900 1700 Frequency(MHz) 1780 1820 Frequency(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 1740 All specifications may change without notice 5 / 11 Version 6.1 AP209 MMIC Application Circuit @ 2100MHz, Vdc=+9V Bill of Material PARAMETER TYP PARAMETER TYP C1 1.2 pF L1, L3 3.9 nH C2 1.5 pF L2 18 nH C3 100 pF R1 0 Ω C4 0.1 uF OIP3 vs. Frequency 13 5 50 12 0 45 11 -5 10 -10 9 -15 30 8 -20 25 1900 1960 2020 2080 2140 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 40 35 2200 1900 1960 Frequency(MHz) 2080 2140 2200 2140 2200 P1dB vs. Frequency 5 25 4 24 P1dB(dBm) Noise Figure(dB) Noise Figure vs. Frequency 3 2 23 22 21 1 1900 2020 Frequency(MHz) 20 1960 2020 2080 2140 2200 1900 Frequency(MHz) 2020 2080 Frequency(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 1960 All specifications may change without notice 6 / 11 Version 6.1 AP209 MMIC Application Circuit @ 2300MHz, Vdc=+9V Bill of Material PARAMETER TYP PARAMETER TYP C1 0.75 pF L1 3.9 nH C2 2.7 pF L2 18 nH C3 100 pF L3 2.7 nH C4 0.1 uF R1 0 Ω OIP3 vs. Frequency 13 0 50 12 -5 45 11 -10 10 -15 9 -20 30 -25 25 8 2200 2240 2280 2320 2360 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 40 35 2400 2200 2240 Frequency(MHz) 2360 2400 2360 2400 P1dB vs. Frequency 5 25 4 24 P1dB(dBm) Noise Figure(dB) 2320 Frequency(MHz) Noise Figure vs. Frequency 3 2 23 22 21 1 2200 2280 20 2240 2280 2320 2360 2400 2200 Frequency(MHz) 2280 2320 Frequency(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 2240 All specifications may change without notice 7 / 11 Version 6.1 AP209 MMIC Application Circuit @ 2600MHz, Vdc=+9V Bill of Material PARAMETER TYP PARAMETER TYP C1 0.75 pF L1 2.7 nH C2 2.0 pF L2 18 nH C3 100 pF L3 1.8 nH C4 0.1 uF R1 0 Ω OIP3 vs. Frequency 13 0 50 12 -5 45 11 -10 10 -15 9 -20 30 -25 25 8 2500 2540 2580 2620 2660 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 40 35 2700 2500 2540 Frequency(MHz) 2660 2700 2660 2700 P1dB vs. Frequency 5 25 24 4 P1dB(dBm) Noise Figure(dB) 2620 Frequency(MHz) Noise Figure vs. Frequency 3 2 23 22 21 1 2500 2580 20 2540 2580 2620 2660 2500 2700 2580 2620 Frequency(MHz) Frequency(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 2540 All specifications may change without notice 8 / 11 Version 6.1 AP209 MMIC Application Circuit @ 50~1000MHz, Vdc=+9V Bill of Material PARAMETER TYP PARAMETER TYP C1 1 nF L1 6.8 nH C2 1 nF L2 Wirewround C3 100 pF C4 100 nF 15 10 50 14 0 45 13 -10 12 -20 11 -30 30 -40 1000 25 10 200 400 600 0 Ω R1 800 40 35 50 200 Frequency(MHz) 400 600 800 1000 800 1000 Frequency(MHz) Noise Figure vs. Frequency P1dB vs. Frequency 5 25 4 24 p1dB(dBm) NF(dB) 2520Type OIP3 vs. Frequency OIP3(dBm) . Magnitude(dB) S-Parameter vs. Frequency 50 1 uH 3 2 23 22 21 1 20 0 50 200 400 600 800 50 1000 400 600 Frequency(MHz) Frequency(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 200 All specifications may change without notice 9 / 11 Version 6.1 AP209 MMIC Package Dimensions (Type: SOT-89) * Unit: mm[inch] | Tolerance ±0.2[.008] ▲ Top View ▲ Side View ▲ Bottom View Pin Description Pin No Function Pin No Function 1 Input 4 GND 2 GND - - 3 Output / Bias - - Recommended Pattern Recommended Mounting Configuration * Mounting Configuration Notes 1. Ground / thermal via holes are critical for the proper performance of this device. 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added near the part to fasten the board to a heatsink. Ensure that the ground / thermal via hole region contacts the heatsink. 4. Do not put solder mask on the backside of the PCB in the region where the board contacts the heatsink. 5. RF trace width depends upon the PCB material and construction. 6. Use 1 oz. Copper minimum. Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] All specifications may change without notice 10 / 11 Version 6.1 AP209 MMIC Revision History Part Number AP209 Release Date Version 2012.10.15 6.1 Modification Change by a new document form Data Sheet Status - RFHIC Corporation reserves the right to make changes to any products herein or to discontinue any product at any time without notice. While product specifications have been thoroughly examined for reliability, RFHIC Corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. RFHIC Corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC Corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. Sales, inquiries and support should be directed to the local authorized geographic distributor for RFHIC Corporation. For customers in the US, please contact the US Sales Team at 919677-8780. For all other inquiries, please contact the International Sales Team at 82-31-250-5078. Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] All specifications may change without notice 11 / 11 Version 6.1