MPU-240S Series Compact U-Channel, 240W Power Factor Corrected, AC/DC Power Supplies Electrical Specifications Key Features: • 240W Output Power • Universal 90-264 AC Input • Low Profile U-Channel Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice. Input Parameter Conditions Input Voltage Range • Power Factor Correction Input Frequency Input Current • EN 60950 Approved Inrush Current • 7 Single Output Models • Meets EN 55022 B • “Finger Safe” Cover Avail. • DIN Rail Kit Available Min. Typ. 90 120 47 See Model Selection Guide Cold Start, 115 VAC Cold Start, 230 VAC 115 VAC 0.98 230 VAC 0.95 Universal Power Factor Correction, See Note 1 Safety Ground Leakage Current Max. 264 370 63 Units VAC VDC Hz 30.0 60.0 A Pk W/VA 0.50 mA Output Parameter Output Voltage/Current Output Voltage Accuracy Line Regulation Load Regulation Ripple & Noise (20 MHz), See Note 2 Hold-Up Time< 115 VAC Temperature Coefficient Overload Protection Over Voltage Protection, See Note 4 Short Circuit Protection, See Note 4 Conditions Min. Typ. Max. See Model Selection Guide ±2.0 VIN = Min to Max ±1.0 IOUT = 5% to 100% ±1.0 See Model Selection Guide U-Channel 13 With Cover 20 ±0.03 See Note 3 130 180 Latch Off (See Model Selection Guide) Latch Off Units % % % mSec %/°C %IOUT General Parameter Conditions Input to Output Isolation Voltage Input to Ground Output to Ground Switching Frequency EMI Characteristics Parameter Radiated Emissions Conducted Emissions Noise Immunity (EMS) 292 Page Street Suite D Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: [email protected] W: www.micropowerdirect.com Typ. Max. Units VAC VDC VAC 65 Standard kHz Criteria Level B B EN 55022 EN 55022 EN 55024 Surge MicroPower Direct Min. 4,000 5,656 2,000 500 EN 61000-4-4 ±1 kV (L-N) ±2 kV (L-FG & N-FG) Environmental Parameter Operating Temperature Range Storage Temperature Range Cooling Humidity Physical Size Weight Conditions Min. Typ. Max. -10 +25 +70 -25 +85 Free Air Convection (See Derating Curve) RH, Non-condensing 95 Ambient Units °C °C % See Mechanical Drawings (Pages 3 & 4) U-Channel 20.45 Oz (0.580 kg) With Cover 21.59 Oz (0.610 kg) Reliability Specifications Parameter MTBF Safety Standards Vibration Conditions Min. Typ. Max. Units MIL HDBK 217F, 25°C, Gnd Benign 50 kHours UL 1950, EN 60950 (except 5 VOUT model) 10~500 Hz, 2G 10 min/1 Cycle. Period of 60 min each along X, Y &Z Axis www.micropowerdirect.com www.micropowerdirect.com Model Selection Guide Model Number MPU-240S-05YZ MPU-240S-12YZ MPU-240S-15YZ MPU-240S-24YZ MPU-240S-28YZ MPU-240S-32YZ MPU-240S-38YZ MPU-240S-48YZ Input Current (A) 115 VAC 230 VAC 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Voltage Output Current (A) (VDC) Without Cover With Cover % Min. 5.0 12.0 15.0 24.0 28.0 32.0 38.0 48.0 36.00 20.00 16.00 10.00 8.57 7.50 6.66 5.00 --16.66 14.66 10.00 8.57 7.50 6.66 5.00 5.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 Notes: 1. PFC meets EN61000-3-2. 2. Ripple and noise is measured at 20 MHz bandwidth using a 0.1 µF and a 47 µF capacitor connected in parallel as close to the power supply terminals as possible. 3. Overload protection is provided by a “hiccup mode” circuit. The unit recovers automatically when the fault condition is removed. 4. Short circuit protection and over voltage protection are provided by latch-off circuits. The unit must be restarted once the fault condition is cleared. 5. These units will operate at no load without damage. 6. The 5 VOUT model is not available with a cover. 7. Each unit includes a 5A/250V input fuse. Since this fuse is not field replaceable, it is recommended that an external fuse be used on the input of the power supply for protection. For these units, a 4.8A/250V slow blow fuse is recommended. Max Output Power Max Ripple & Noise (W) (mV P-P) 180 240 240 240 240 240 240 240 150 120 200 200 200 200 200 200 Efficiency (%, Typ) 87 90 90 92 92 92 92 93 Temperature Derating Model Number Load vs Input Voltage: ”C” Models With 15 CFM Load vs Input Voltage: Without Fan Block Diagram Page 2 • MPD 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: [email protected] Mechanical Dimensions: 5V Output Model www.micropowerdirect.com Connections Input Connector (CN1): • Barrier Strip Terminal Block: Anytek Connector: DG28S-B-03P: M3 Screws 3 terminals, 7.62 mm Centers Suitable Wire = 22 - 14 AWG Term. Function 1 2 3 AC-Line AC-Neutral Field Grnd Output Connectors: • Four PCB Terminals (Wire Lugs): PCB-50 (M5 Screws) Suitable Wire = 22 - 14 AWG Term. Function 4 5 6 7 +VOUT +VOUT -VOUT -VOUT Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.02 (±0.50) Mechanical Dimensions: All Other Models Connections Input Connector (CN1): • Barrier Strip Terminal Block: Anytek Connector: DG28S-B-03P: M3 Screws 3 terminals, 7.62 mm Centers Suitable Wire = 22 - 14 AWG Term. Function 1 2 3 AC-Line AC-Neutral Field Grnd Output Connector (CN2): • Barrier Strip Terminal Block: Anytek Connector: DG28S-B-04P: M3 Screws 4 terminals, 7.62 mm Centers Suitable Wire = 22 - 14 AWG Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.02 (±0.50) MicroPower Direct • 292 Page Street Ste D Stoughton, MA 02072 Term. Function 4 5 6 7 +VOUT +VOUT -VOUT -VOUT • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: [email protected] www.micropowerdirect.com Mechanical Dimensions: With Cover The 5 VOUT model is not available with a cover installed Connections Input Connector (CN1): • Barrier Strip Terminal Block: Anytek Connector: DG28S-B-03P: M3 Screws 3 terminals, 7.62 mm Centers Suitable Wire = 22 - 14 AWG Term. Function 1 2 3 AC-Line AC-Neutral Field Grnd Output Connector (CN2): • Barrier Strip Terminal Block: Anytek Connector: DG28S-B-04P: M3 Screws 4 terminals, 7.62 mm Centers Suitable Wire = 22 - 14 AWG Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.02 (±0.50) Page 4 • MPD 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • Term. Function 4 5 6 7 +VOUT +VOUT -VOUT -VOUT E-Mail: [email protected] www.micropowerdirect.com OPTIONAL DIN Rail Mount DIN Rail Mounting Kit A DIN Rail Mounting kit is available from MPD, for use with MPU-240”C” models. The kit contains a mounting clip and three screws. The clip is attached to the bottom of the unit using the three threaded holes marked “A” on the mechanical diagrams. Screws should not be inserted over 2 mm into the threaded inserts, To order the kit, ask for part no: MPU-240S-DRK MicroPower Direct • 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: [email protected] www.micropowerdirect.com OPTIONAL CONNECTOR - “MOLEX” TYPE Input Output Connections Input Connector (CN1): • “Molex” type connector: Alex Connector: 8673W-050220 5 pins, 2 Removed Mating Connector: 8639 type or equiv. Pin Function 1 2 3 AC-Line AC-Neutral Field Grnd Output Connector (CN2): • “Molex” type connector: Alex Connector: 8673W-080020 8 pins Mating Connector: 8639 type or equiv. Pin Function Pin Function 4 5 6 7 +VOUT +VOUT +VOUT +VOUT 8 9 10 11 -VOUT -VOUT -VOUT -VOUT Related products that may be of interest: MPU-60S MPO-60S • 60W Output Power • Universal 90 - 264 VAC Input • 4” x 2” Open Frame Construction • EN 60950 Approved • 240W Output Power • EN 60950 Approved • Compact U-Channel Construction • Cover & DIN Rail Kit Available MPO-120S • 180W Output Power • Universal 90 - 264 VAC Input • Compact Open Frame • EN 60950 Approved MPU-240S • 300W Output Power • EN 60950 Approved • Small 5 x 3.2 x 1.5 In U-Channel • Cover Available MPU-120S MPO-500 • 180W Output Power • Compact U-Channel Construction • Cover & DIN Rail Kit Available • EN 60950 Approved • 500W Output Power • 5” x 3” x 1.4” Open Frame • Active Power Factor Correction • EN 60950 Approved MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: [email protected]