Surface Mount Aluminum Electrolytic Capacitors NACNW Series FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • NON-POLARIZED, 1000 HOURS AT 105OC • 5.5mm HEIGHT • ANTI-SOLVENT (2 MINUTES) • DESIGNED FOR REFLOW SOLDERING includes all homogeneous materials RoHS Compliant CHARACTERISTICS *See Part Number System for Details Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 1 Minutes @ 20°C Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test 105°C 1,000 Hours (Reverse polarity every 500 Hours) 6.3 ~ 50Vcc 0.1 ~ 47µF -55 ~ +105°C ±20% (M) 0.03CV + 8µA max. W.V. (Vdc) Tan δ @ 120Hz/20°C W.V. (Vdc) Z -25°C/Z +20°C Z -40°C/Z +20°C Capacitance Change Tan δ Leakage Current 6.3 10 16 25 35 50 0.24 0.22 0.20 0.20 0.20 0.18 6.3 10 16 25 35 50 3 3 2 2 2 2 8 8 4 4 3 3 Within ±25% of initial measured value Less than 200% of specified max. value Less than specified max. value STANDARD VALUES, CASE SIZES & SPECIFICATIONS Cap. (µF) 22 Working Voltage Case Size 5X5.5 33 6.3Vdc Max. ESR (Ω) Max. Ripple Current (mA rms) AT 120Hz/105°C AT 120Hz/20°C 18.09 22 6.3X5.5 12.06 27 PART NUMBER SYSTEM 47 6.3X5.5 8.47 33 NACNW 10 4X5.5 36.49 12 6.3X5.5 16.59 25 6.3X5.5 11.06 30 4.7 4X5.5 70.58 8 10 5X5.5 33.17 17 22 10Vdc 33 16Vdc 6.3X5.5 15.08 27 33 6.3X5.5 10.05 40 3.3 4X5.5 100.53 7 13 22 Series 5X5.5 70.58 10 6.3X5.5 33.17 20 2.2 4X5.5 150.79 5.9 5X5.5 100.53 12 5X5.5 70.58 14 10 6.3X5.5 33.17 21 0.1 4X5.5 2985.67 0.7 0.22 4X5.5 1357.12 1.6 0.33 4X5.5 904.75 2.4 0.47 4X5.5 635.25 3.5 4X5.5 298.57 7 2.2 5X5.5 135.71 10 3.3 5X5.5 90.47 13 4.7 6.3X5.5 63.52 16 4.7 3.3 4.7 1.0 25Vdc 35Vdc 50Vdc 30 www.niccomp.com I I W 0.3mm max. L A P B DIMENSIONS (mm) Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. TR 13 F RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10 10µF Dφ PRECAUTIONS ® 100 M 16V 5x5.5 Case Size Dφ ± 0.5 L max. A ± 0.2 I ± 0.2 W P ± 0.2 4x5.5 4.0 5.5 4.3 1.8 0.5 ~ 0.8 1.0 5x5.5 5.0 5.5 5.3 2.1 0.5 ~ 0.8 1.4 6.3x5.5 6.3 5.5 6.6 2.5 0.5 ~ 0.8 2.2 www.lowESR.com www.RFpassives.com www.SMTmagnetics.com