AZETTLER AZ9801-1A-6D 70 amp super-iso automotive relay Datasheet

AZ9801
70 AMP SUPER-ISO
AUTOMOTIVE
RELAY
FEATURES
•
•
•
•
•
•
•
•
70 Amp contact rating – “Super ISO”
High momentary carry current (500 A)
High operating temperature (125°C)
SPST (1 Form A)
Quick connect terminals
ISO/TS 16949, ISO9001, ISO14000
Tested in accordance with SAE J2544
Epoxy sealed version available
GENERAL DATA
CONTACTS
Arrangement
SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 980 W
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 70 A 14 VDC Res.
Operate Time (typical)
10 ms at nominal coil voltage
Release Time (typical)
7 ms at nominal coil voltage
(with no coil suppression)
Max. switched current: 70 A
Max. switched voltage: 50 VDC
Material
Silver tin oxide
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
0.68 W
Max. Continuous
Dissipation
4.0 W at 20°C (68°F)
Temperature Rise
56°C (101°F) at nominal coil voltage
Temperature
Dielectric Strength
500 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms contact to contact
Insulation Resistance
100 megohms min. at 500 VDC, 20°C
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
-40°C (-40°F) to 125°C (257°F)
-40°C (-40°F) to 155°C (311°F)
Vibration
18g 10-500 Hz
Shock
30 g
Enclosure
P.B.T. polyester
Terminals
Copper alloy
Quick Connect
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. 155°C (311°F)
Weight
40 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
5/25/05W
AZ9801
RELAY ORDERING DATA
COIL SPECIFICATIONS – STANDARD
Nominal Coil
VDC
6
12
24
Must Operate
VDC
3.2
7.2
14.4
Max. Continuous
VDC
9
18
37
Coil Resistance
± 10%
22.5
90
360
ORDER NUMBER*
Coil Resistance
± 10%
18
72
288
ORDER NUMBER*
AZ9801–1A–6D
AZ9801–1A–12D
AZ9801–1A–24D
COIL SPECIFICATIONS – HI COIL POWER
Nominal Coil
VDC
6
12
24
Must Operate
VDC
3.2
7.2
14.4
Max. Continuous
VDC
7
14
28
AZ9801–1A–6DH
AZ9801–1A–12DH
AZ9801–1A–24DH
* For parallel resistor add “R” to end of part number. Parallel resistor values: 180W for 12 V coil and 2700W for 24 V coil. Add
suffix “E” for epoxy sealed version.
HARDWARE ORDERING DATA
DESCRIPTION
ORDER NUMBER
Socket
ST980
MECHANICAL DATA
Outline Dimensions
Wiring Diagrams
1.03
[26.2]
1.03
[26.2]
SPST (N.O.)
30
30
.980
[24.9]
.705
[17.9]
85
86
.327
[8.3]
87
.661
[16.8]
2x.441
[11.2]
3x.598
[15.2]
2x.031
[.8]
86
85
87
2x.047
[1.2]
VIEWED TOWARD TERMINALS
2x.374
[9.5]
Socket, SPST - ST980
2x.248
[6.3]
.761
[19.33]
.206
[5.23]
.292
[7.43]
1.265
[32.13]
.697
[17.72]
1.147
[29.12]
.319
[8.12]
.632
[16.05]
.729
[18.53]
.967
[24.56]
Note: Recommended socket hardware:
Coil Terminals:
Amp 42281-1 (1/4") 14-18 Awg
Contact Terminals: Amp 280756-4 (3/8") 10-12 Awg
.903
[22.94]
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
5/25/05W
Similar pages