POWER RELAY 1 POLE—20A (Contact Gap 3.0mm type) FTR-K2G SERIES RoHS compliant RoHS compliant n Features l l l l l l l l Contact gap min. 3.0mm Full disconnection 1 Pole, 1 Form A Maximum inrush current 120A (TV-8) HIGH INSULATION Reinforced insulation Insulation Distance between coil and contact: - Clearance min. 8.0mm, Creepage min. 9.5mm - Dielectric Strength: 5KV - Surge Strength: 10KV HEAT RESISTANCE, FLAMMABILITY Class B (130°C) coil insulation, flammability UL94V-0 (plastic) SAFETY STANDARDS UL, CSA, VDE approved RoHS compliant Please see page 7 for more information n ORDERING INFORMATION [Example] FTR-K2G A K 012 T (a) (b) (c) (d) (e) (a) Series name FTR-K2G (b) Contact arrangement A: 1 Form A (SPST-NO) (c) Coil type K: Standard (1000mW) (d) Coil nominal voltage 005 : 5VDC 012 : 12VDC 048 : 48VDC 006 : 6VDC 018 : 18VDC 060 : 60VDC 009 : 9VDC 024 : 24VDC 110 : 110VDC (e) Contact material T: AgSnO2 (TV-8) Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K2GAK012T Actual marking: -K2GAK012T FTR-K2G Series n PART NUMBERS Standard type: 1000mW Ordering Part Number Contact Coil Voltage FTR-K2GAK005T 5 FTR-K2GAK006T 6 FTR-K2GAK009T 9 FTR-K2GAK012T 12 FTR-K2GAK018T FTR-K2GAK022T n Series FTR-K2G Contact Material 18 1 form A T: AgSnO2 (TV-8 rated) 22 FTR-K2GAK024T 24 FTR-K2GAK048T 48 FTR-K2GAK060T 60 FTR-K2GAK110T 110 COIL DATA CHART Standard Type 1000mW Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage*1 Coil Resistance Must Operate ( ±10%) Voltage*2 005 5 8.5 VDC 25 Ω 006 6 10.2 VDC 36 Ω 3.9 VDC 0.3 VDC 009 9 15.3 VDC 81 Ω 5.85 VDC 0.45 VDC 012 12 20.4 VDC 145 Ω 7.8 VDC 0.6 VDC 018 18 30.6 VDC 325 Ω 11.7 VDC 0.9 VDC 022 22 37.4 VDC 485 Ω 14.3 VDC 1.1 VDC 024 24 40.8 VDC 580 Ω 15.6 VDC 1.2 VDC 048 48 81.6 VDC 2,200Ω 31.2 VDC 2.4 VDC 1,050 060 60 102.0 VDC 3,600Ω 39.0 VDC 3.0 VDC 1,000 110 110 187.0 VDC 13,000 Ω 71.5 VDC 5.5 VDC 930 3.25 VDC Must Release Voltage*2 Nominal Power (mW) 0.25 VDC 1,000 Note: All values at 20°C. *1: No contact current at 20°C. Please see 'operating range' data for other conditions. *2: Specified values are subject to pulse shape voltage FTR-K2G Series n SPECIFICATIONS Item Contact Coil FTR-K2G2AK ( )T Arrangement 1 form A (SPST-NO) Material AgSnO2 Resistance (initial) Maximum 100 mΩ (at 6VDC, 1A) Rating (resistive) 20A / 250 VAC Maximum Carrying Current*1 25A Maximum Switching Power 5000VA Maximum Switching Voltage 440VAC Minimum Switching Load*2 100 mA, 5 VDC (reference value) Nominal Power (20°C) Approximately 1000 mW Operate Power (20°C) Approximately 420 mW Operating Temperature -40ºC to +70ºC (no frost) Time Value Operate Time (at nominal voltage) Life Release Time (without diode) Maximum 15 ms Mechanical 1 x 106 operations minimum Resistive 100 x 103 operations min. Lamp load (TV-8) 25 x 103 operations minimum Vibration Resistance Misoperation 10 to 55 Hz, at double amplitude of 1.5 mm Endurance 10 to 55Hz, at double amplitude of 1.5 mm Shock Resistance Misoperation Electrical Other Maximum 30 ms (without bounce) Weight Endurance 100m/s2 (11±1ms) 1,000m/s2 (6±1ms) Approximately 34g *1 Need to consider the heat when mounted on PCB at carry currents > 10A. Please confirm at actual condition. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. FTR-K2G Series n INSULATION Item FTR-K2G Note Resistance Minimum 1,000 MΩ at 500 VDC Dielectric Strength between open contacts 2,000 VAC (50/60 Hz) 1 min. between coil and contacts 5,000 VAC (50/60 Hz) 1 min. Surge Voltage (between coil and contact) 10,000 V Clearance/Creepage distance 8.0mm / 9.5mm Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group 250 V 3 III a n SAFETY STANDARDS 1.2 x 50µs standard wave Type Compliance Compliance rating UL UL 508 CSA22.2 No.14 UL/CSA60950-1 E63614 Flammability: UL 94-V0 (plastics) 20A, 277VAC (resistive) TV-8, 120 VAC VDE 0435, 0631, 0700, 0860 400 22822 20A, 250 VAC (cosø=1) 70°C 100k operations 8/120A, 250VAC 70°C 30k operations n PACKAGING Package MOQ Weight of relay Tube 200 pieces Approximately 34 g FTR-K2G Series CHARACTERISTIC DATA 0A 0A 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Coil Coilpower power(W) (W) 250 VA C 250 VA C 250VAC CO S φ =0.7 250VAC CO S φ =0.7 250VAC CO S φ =0.4 250VAC CO S φ =0.4 Maximum switching power 300 200 200 AC resistive 100 50 530 30 22020 1 10 100 ature (˚C) 2 0.2 0.1 n of operate oltage 10 2 4 4 6 8 10 12 14 16 18 20 22 24 26 28 30 6 8 10 12 14 16 18 20 22 24 26 28 30 Contact Contactcurrent currentload load(A) (A) 20 50 100 200 FTR- K2G A K( )T n=100 Operate Release 80 70 60 50 40 30 20 2 0.2 0.2 0.1 0.110 10 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 00 20 20 50 100 200 50 100 200 10 20 30 40 50 60 70 80 90 100 10 20 30 40 50 60 70 80 90 100 Nominal Nominalvoltage voltagemult. mult.factor factor(%) (%) 500 1000 500 1000 Contact Contactvoltage voltage(V) (V) Distribution Distributionofofoperate operate &&release releasetime time FTR- K2G A K( )T FTR- K2G A K( )T n=100 n=100 Operate Operate Release Release 0 2 2 4 4 6 6 8 10 12 14 16 18 20 22 24 8 10 12 14 16 18 20 22 24 Time Time(ms) (ms) 0 Distribution of contact resistance 100 FTRK2G A K( )T n=100 90 80 70 60 50 40 30 20 10 mult. factor (%) 0 1 1 0.5 0.5 Distribution Distributionofofoperate operate &&release releasevoltage voltage FTR-KK 2GA K ( ) T n =FTR-K 1 0 0 K 2GA K ( ) T n = 1 Operate 00 Operate Release Release 2 AC resistive AC resistive 500 1000 Distribution of operate & release time 90 80 90 100 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 00 Maximum Maximumswitching switchingpower power REFERENCE DATA Contact voltage (V) 100 Distribution (%) FTR-KK 2GA K ( ) T n=100 Operate Release 0 Distribution (%) 0 80 90 100 110 60 70 10 50 3 1 Ambient Ambienttemperature temperature(˚C) (˚C) Life Lifecurve curve 20 100 il cool co il h o t c oc o il age of ot te v o lto lt a g e o f h ra e p O e ra te v Op o o l c ocilo il ge of c te v o ltoalt a g e o f c o o l O p e rara v O p e te 0.5 0.50 10 20 30 40 50 60 70 80 90 100 110 0 10 20 30 40 50 60 70 80 90 100 110 1 500 500 0.5 0A 0A 25A 25A 2 100 100 50 50 20 20 10 10 5 5 1.5 1.5 50 c o il 2 20A 20A 100 300 3 Nominalvoltage voltagemult. mult.factor factor Nominal 25A 25A 1000 1000 ange Operating Operatingrange range 2.5 2.5 Contactcurrent current(A) (A) Contact Coil Coiltemperature temperaturerise rise Distribution(%) (%) Distribution Service life(x10 (x103 3operations) operations) Contact current (A) Service life Temperaturerise rise(deg.) (deg.) Temperature 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0 Distribution(%) (%) Distribution n 10 0 2 4 6 8 10 12 14 16 18 20 22 24 Time (ms) 0 0 5 10 15 20 25 30 35 40 45 50 Contact resistance (mΩ) FTR-K2G Series n DIMENSIONS l Dimensions l Schematics (BOTTOM VIEW) 5 6 C OM NO C OM NO 0.5 28+0.3 4 1 2 3 4 Orientation mark 0.8 20 0.8 10 35+0.3 1 1 7.5 16+0.3 l PC board mounting hole layout (BOTTOM VIEW) (4 .25) 0.3 6-Ø 1.3 7.5 Pre-Solder (2.7 ) 20 10 Unit: mm FTR-K2G Series RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable whisker length was found by our in house test. FTR-K2G Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. October 29, 2008.