To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. DATA SHEET MOS FIELD EFFECT TRANSISTOR NP40N055EHE, NP40N055KHE NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE SWITCHING N-CHANNEL POWER MOS FET DESCRIPTION These products are N-channel MOS Field Effect Transistors designed for high current switching applications. <R> ORDERING INFORMATION PART NUMBER NP40N055EHE-E1-AY Note1, 2 NP40N055EHE-E2-AY Note1, 2 NP40N055KHE-E1-AY Note1 NP40N055KHE-E2-AY Note1 NP40N055CHE-S12-AZ Note1, 2 NP40N055DHE-S12-AY Note1, 2 NP40N055MHE-S18-AY Note1 NP40N055NHE-S18-AY Note1 LEAD PLATING PACKING Pure Sn (Tin) Tape 800 p/reel PACKAGE TO-263 (MP-25ZJ) typ. 1.4 g TO-263 (MP-25ZK) typ. 1.5 g Sn-Ag-Cu Pure Sn (Tin) TO-220 (MP-25) typ. 1.9 g Tube 50 p/tube Notes 1. Pb-free (This product does not contain Pb in the external electrode.) 2. Not for new design TO-262 (MP-25 Fin Cut) typ. 1.8 g TO-220 (MP-25K) typ. 1.9 g TO-262 (MP-25SK) typ. 1.8 g (TO-220) FEATURES • Channel temperature 175 degree rated • Super low on-state resistance RDS(on) = 23 mΩ MAX. (VGS = 10 V, ID = 20 A) • Low input capacitance (TO-262) Ciss = 1070 pF TYP. • Built-in gate protection diode (TO-263) The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. D14092EJ6V0DS00 (6th edition) Date Published October 2007 NS Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2002, 2007 NP40N055EHE, NP40N055KHE, NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Drain to Source Voltage (VGS = 0 V) VDSS 55 V Gate to Source Voltage (VDS = 0 V) VGSS ±20 V Drain Current (DC) (TC = 25°C) ID(DC) ±40 A ID(pulse) ±100 A Drain Current (Pulse) Note1 Total Power Dissipation (TA = 25°C) PT 1.8 W Total Power Dissipation (TC = 25°C) PT 66 W Channel Temperature Tch 175 °C Tstg −55 to +175 °C Single Avalanche Current Note2 IAS 29/21/7 A Single Avalanche Energy Note2 EAS 0.8/44/49 mJ Storage Temperature Notes 1. PW ≤ 10 μs, Duty cycle ≤ 1% 2. Starting Tch = 25°C, VDD = 28 V, RG = 25 Ω, VGS = 20 → 0 V (See Figure 4.) THERMAL RESISTANCE Channel to Case Thermal Resistance Rth(ch-C) 2.27 °C/W Channel to Ambient Thermal Resistance Rth(ch-A) 83.3 °C/W 2 Data Sheet D14092EJ6V0DS NP40N055EHE, NP40N055KHE, NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE ELECTRICAL CHARACTERISTICS (TA = 25°C) CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT 18 23 mΩ 4.0 V Drain to Source On-state Resistance RDS(on) VGS = 10 V, ID = 20 A Gate to Source Threshold Voltage VGS(th) VDS = VGS, ID = 250 μA 2.0 3.0 Forward Transfer Admittance | yfs | VDS = 10 V, ID = 20 A 7 14 Drain Leakage Current IDSS VDS = 55 V, VGS = 0 V 10 μA Gate to Source Leakage Current IGSS VGS = ±20 V, VDS = 0 V ±10 μA Input Capacitance Ciss VDS = 25 V, 1070 1610 pF Coss VGS = 0 V, 190 280 pF 95 180 pF Output Capacitance f = 1 MHz S Reverse Transfer Capacitance Crss Turn-on Delay Time td(on) ID = 20 A, 16 35 ns tr VGS = 10 V, 9.2 23 ns 29 57 ns 9.2 23 ns 35 nC Rise Time VDD = 28 V, Turn-off Delay Time td(off) Fall Time tf Total Gate Charge QG ID = 40 A, 23 Gate to Source Charge QGS VDD = 44 V, 6 nC 9 nC IF = 40 A, VGS = 0 V 1.0 V RG = 1 Ω VGS = 10 V Gate to Drain Charge QGD Body Diode Forward Voltage VF(S-D) Reverse Recovery Time trr IF = 40 A, VGS = 0 V, 38 ns Qrr di/dt = 100 A/μs 46 nC Reverse Recovery Charge TEST CIRCUIT 1 AVALANCHE CAPABILITY D.U.T. RG = 25 Ω PG. VGS = 20 → 0 V TEST CIRCUIT 2 SWITCHING TIME D.U.T. L 50 Ω VGS RL Wave Form RG PG. VDD VGS 0 VGS 10 % 90 % VDD VDS 90 % IAS 90 % VDS VGS 0 BVDSS VDS 10 % 10 % 0 Wave Form VDS ID τ VDD Starting Tch τ = 1 μs Duty Cycle ≤ 1 % td(on) tr ton td(off) tf toff TEST CIRCUIT 3 GATE CHARGE D.U.T. IG = 2 mA PG. 50 Ω RL VDD Data Sheet D14092EJ6V0DS 3 NP40N055EHE, NP40N055KHE, NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE TYPICAL CHARACTERISTICS (TA = 25°C) Figure1. DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA Figure2. TOTAL POWER DISSIPATION vs. CASE TEMPERATURE PT - Total Power Dissipation - W dT - Percentage of Rated Power - % 70 100 80 60 40 20 0 0 25 50 75 60 50 40 30 20 10 0 100 125 150 175 200 50 75 100 125 150 175 200 TC - Case Temperature - °C Figure.3 FORWARD BIAS SAFE OPERATING AREA Figure4. SINGLE AVALANCHE ENERGY DERATING FACTOR 1000 100 d ite Lim0 V) n) o 1 ( S RDVGS = ( 10 ID(pulse) ID(DC) PW 10 1m DC Po Lim wer ite Dis sip d ati s =1 0μ s 0μ s on 1 TC = 25°C Single Pulse 0.1 0.1 1 10 60 Single Pulse Avalanche Energy - mJ ID - Drain Current - A 25 0 TC - Case Temperature - °C 49 mJ 44 mJ 50 40 IAS = 7 A 21 A 29 A 30 20 10 0.8 mJ 0 25 100 50 75 100 125 150 175 Starting Tch - Starting Channel Temperature - °C VDS - Drain to Source Voltage - V Figure5. TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH rth(t) - Transient Thermal Resistance - °C/W 1000 100 Rth(ch-A) = 83.3°C/W 10 Rth(ch-C) = 2.27°C/W 1 0.1 Single Pulse 0.01 10 μ 100 μ 1m 10 m 100 m 1 PW - Pulse Width - s 4 Data Sheet D14092EJ6V0DS 10 100 1000 NP40N055EHE, NP40N055KHE, NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE Figure7. DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE Figure6. FORWARD TRANSFER CHARACTERISTICS 1000 120 Pulsed ID - Drain Current - A ID - Drain Current - A 100 100 TA = −55°C 25°C 75°C 150°C 175°C 10 1 0.1 80 VGS =10 V 60 40 20 2 3 4 VDS = 10 V 6 7 5 Pulsed 0 0 10 TA = 175°C 75°C 25°C −55°C 0.1 0.1 1 10 100 RDS(on) - Drain to Source On-state Resistance - mΩ ID - Drain Current - A Figure10. DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 50 Pulsed 40 30 VGS = 10 V 20 10 0 0.1 1 10 100 RDS(on) - Drain to Source On-state Resistance - mΩ Figure8. FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT 100 Pulsed VDS = 10 V 0.01 0.01 4 3 5 VDS - Drain to Source Voltage - V VGS(th) - Gate to Source Threshold Voltage - V | yfs | - Forward Transfer Admittance - S VGS - Gate to Source Voltage - V 1 2 1 Figure9. DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 50 Pulsed 40 30 ID = 20 A 20 10 0 0 2 4 6 8 10 12 14 16 18 VGS - Gate to Source Voltage - V Figure11. GATE TO SOURCE THRESHOLD VOLTAGE vs. CHANNEL TEMPERATURE VDS = VGS ID = 250 μA 4.0 3.0 2.0 1.0 0 −50 0 50 100 150 Tch - Channel Temperature - °C ID - Drain Current - A Data Sheet D14092EJ6V0DS 5 Figure13. SOURCE TO DRAIN DIODE FORWARD VOLTAGE Figure12. DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE 1000 Pulsed IF - Diode Forward Current - A 40 30 VGS = 10 V 20 10 Pulsed 100 VGS = 10 V 0V 10 1 ID = 20 A 0 −50 50 0 100 0.1 0 150 VF(S-D) - Source to Drain Voltage - V Figure14. CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 10000 VGS = 0 V f = 1 MHz Ciss 1000 Coss 100 10 0.1 Crss 1 10 Figure15. SWITCHING CHARACTERISTICS 1000 100 tf 100 td(off) td(on) tr 10 VDD = 28 V VGS = 10 V 1 RG = 1 Ω 0.1 VDS - Drain to Source Voltage - V 10 1 10 100 16 80 14 12 60 VGS VDD = 44 V 28 V 11 V 40 10 8 6 4 20 2 VDS 0 0 IF - Diode Forward Current - A 6 100 Figure17. DYNAMIC INPUT/OUTPUT CHARACTERISTICS VDS - Drain to Source Voltage - V trr - Reverse Recovery Time - ns di/dt = 100 A/μs VGS = 0 V 100 1 0.1 10 1 ID - Drain Current - A Figure16. REVERSE RECOVERY TIME vs. DIODE FORWARD CURRENT 1000 1.5 1.0 0.5 Tch - Channel Temperature - °C 10 ID = 40 A 20 30 QG - Gate Charge - nC Data Sheet D14092EJ6V0DS 40 VGS - Gate to Source Voltage - V 50 td(on), tr, td(off), tf - Switching Time - ns Ciss, Coss, Crss - Capacitance - pF RDS(on) - Drain to source On-state Resistance - mΩ NP40N055EHE, NP40N055KHE, NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE NP40N055EHE, NP40N055KHE, NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE PACKAGE DRAWINGS (Unit: mm) Note 1.3 ± 0.2 10.0 ± 0.3 No plating 7.88 MIN. 4 2 3 1.4 ± 0.2 0.7 ± 0.2 2.54 TYP. 9.15 ± 0.3 8.0 TYP. 8.5 ± 0.2 1 5.7 ± 0.4 1.0 ± 0.5 4 4.45 ± 0.2 0.025 to 0.25 P. .5R 0 TY R 0.8 2.54 TYP. P. TY 0.5 ± 0.2 0.75 ± 0.2 0.5 ± 2.8 ± 0.2 1.Gate 2.Drain 3.Source 4.Fin (Drain) 1 2 1.Gate 2.Drain 2.5 3.Source 15.5 MAX. 5.9 MIN. 4 1 0.75 ± 0.1 2.54 TYP. 1.3 ± 0.2 12.7 MIN. 6.0 MAX. 1 2 3 0.5 ± 0.2 2.8 ± 0.2 0.75 ± 0.3 2.54 TYP. 2 3 1.0 ± 0.5 10 TYP. Note 4.8 MAX. 1.3 ± 0.2 8.5 ± 0.2 1.3 ± 0.2 4.Fin (Drain) 12.7 MIN. 4.8 MAX. φ 3.6 ± 0.2 10.0 TYP. 1.3 ± 0.2 3 4)TO-262 (MP-25 Fin Cut) 4 8ο 0.25 Note 10.6 MAX. 0.2 0 to 2.54 3)TO-220 (MP-25) 1.3 ± 0.2 2.54 ± 0.25 4.8 MAX. 10 TYP. 1.35 ± 0.3 2)TO-263 (MP-25ZK) 15.25 ± 0.5 1)TO-263 (MP-25ZJ) 3.0 ± 0.3 <R> 0.5 ± 0.2 2.8 ± 0.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain) 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain) Note Not for new design Data Sheet D14092EJ6V0DS 7 NP40N055EHE, NP40N055KHE, NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE 0.8 ± 0.1 0.5 ± 0.2 2.5 ± 0.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain) 1.3 ± 0.2 10.1 ± 0.3 1 2 3 4.45 ± 0.2 1.27 ± 0.2 3.1 ± 0.3 4 8.9 ± 0.2 15.9 MAX. 1.27 ± 0.2 2.54 TYP. 10.0 ± 0.2 13.7 ± 0.3 3 13.7 ± 0.3 1 2 4.45 ± 0.2 1.3 ± 0.2 3.1 ± 0.2 4 φ 3.8 ± 0.2 6.3 ± 0.3 2.8 ± 0.3 10.0 ± 0.2 1.2 ± 0.3 6)TO-262 (MP-25SK) 5)TO-220 (MP-25K) 0.8 ± 0.1 0.5 ± 0.2 2.54 TYP. 2.5 ± 0.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain) EQUIVALENT CIRCUIT Drain Gate Gate Protection Diode Remark Body Diode Source The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device. 8 Data Sheet D14092EJ6V0DS NP40N055EHE, NP40N055KHE, NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE <R> TAPE INFORMATION There are two types (-E1, -E2) of taping depending on the direction of the device. Draw-out side <R> Reel side MARKING INFORMATION NEC 40N055 HE <R> Pb-free plating marking Abbreviation of part number Lot code RECOMMENDED SOLDERING CONDITIONS These products should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, please contact an NEC Electronics sales representative. For technical information, see the following website. Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html) Soldering Method Soldering Conditions Infrared reflow Maximum temperature (Package's surface temperature): 260°C or below MP-25ZJ, MP-25ZK Time at maximum temperature: 10 seconds or less Time of temperature higher than 220°C: 60 seconds or less Preheating time at 160 to 180°C: 60 to 120 seconds Recommended Condition Symbol IR60-00-3 Maximum number of reflow processes: 3 times Maximum chlorine content of rosin flux (percentage mass): 0.2% or less Wave soldering Maximum temperature (Solder temperature): 260°C or below MP-25, MP-25K, MP-25SK, Time: 10 seconds or less MP-25 Fin Cut Maximum chlorine content of rosin flux: 0.2% (wt.) or less Partial heating Maximum temperature (Pin temperature): 350°C or below MP-25ZJ, MP-25ZK, Time (per side of the device): 3 seconds or less MP-25K, MP-25SK Maximum chlorine content of rosin flux: 0.2% (wt.) or less Partial heating Maximum temperature (Pin temperature): 300°C or below MP-25, MP-25 Fin Cut Time (per side of the device): 3 seconds or less THDWS P350 P300 Maximum chlorine content of rosin flux: 0.2% (wt.) or less Caution Do not use different soldering methods together (except for partial heating). Data Sheet D14092EJ6V0DS 9 NP40N055EHE, NP40N055KHE, NP40N055CHE, NP40N055DHE, NP40N055MHE, NP40N055NHE • The information in this document is current as of October, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1