Aluminum Electrolytic Capacitors/GNH Screw Terminal Type Discontinued Series:GNH ■ Features Endurance :105°C 2000 h High-voltage and large-capacitance ■ Recommended Applications Japan U.S.A. For general-purpose inverter, power supply for non-power failure, motor-control inverter ■ Specifications Category temp. range -25 to + 105°C 160 to 400 V .DC Rated W.V. Range Nominal Cap. Range 390 to 22000 µ F -10 to +30% (120Hz/+20°C) 3ÖCV (µA) max.after 5 minutes application of rated working voltage at +20°C C:Capacitance(µF) V: W.V. (V.DC) Capacitance Tolerance DC Leakage Current Dissipation Factor Please see the attached standard products list After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage ) at +105°C, the capacitor shall meet the following limits. Capacitance change ±20% of initial measured value < D.F. = 150 % of initial specified value < initial specified value DC leakage current = After storage for 1000hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in “Endurance”.(With voltage treatment) Endurance Shelf Life ■ Frequency Correction Factor for Ripple Current Freq.(Hz) φD(mm) W.V.(V) 36 51, 64 77, 90 36 51, 64 77, 90 36 51, 64 77, 90 160, 200 250, 350 400 50 60 120 300 360 1k 0.80 0.86 0.90 0.71 0.83 0.85 0.65 0.81 0.85 0.86 0.91 0.95 0.79 0.88 0.90 0.74 0.87 0.90 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.07 1.05 1.05 1.09 1.07 1.05 1.09 1.07 1.05 1.08 1.06 1.06 1.10 1.08 1.06 1.10 1.08 1.06 1.12 1.08 1.08 1.15 1.13 1.11 1.16 1.13 1.11 10k to 1.17 1.10 1.10 1.21 1.20 1.20 1.22 1.21 1.20 ■ Dimensions in mm(not to scale) P.V.C. sleeve Vent φD 64 77 90 F±1.0 φD±1 M5x12 Hexagonal-bolt F 28.6 31.8 31.8 9 max L+4 max ■ Mounting clamp Type 1; φ36 Type 2 Type 3 14 120° H 8.4 E 6 2 φD 16 C 35° 59 max 48±1 30° 2 6m 10 B A 5 44±1 ax 45° 12 0° 1 φD 2-3.5´7 W1 W2 (mm) (mm) φD A B C 51 80.0 68.0 57.5 64 93.0 81.0 70.0 77 104.5 93.5 90.0 E H max. 4.4 13 5.0 13 5.0 13 φD 51 64 77 90 φD1 φD2 65.0 74.0 76.0 86.0 89.0 100.0 101.6 113.0 W1 9.0 8.0 8.0 8.0 W2 14.0 13.0 14.0 14.0 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE191 – Aluminium Electrolytic Capacitors/GNH ■ Discontinued Standard Products Case size W.V. Cap. (-10 to +30%) (V) 160 200 250 350 Dia. Length Specification Ripple D.F. current (120Hz) (120Hz) (+105°C) (+20°C) (A) ( ):Mounting Clamp No 2point clamp ECEG2CG182P( ) N F 13.0 ECEG2CG222N( ) N F 13.0 ECEG2CG272M( ) N F F 22.0 ECEG2CG332L( ) N C F 22.0 ECEG2CG472K( ) N C F (µF) (mm) 1800 36 83 1.98 0.1 13.0 2200 36 103 2.50 0.1 2700 36 125 3.02 0.1 3300 51 83 3.63 0.1 4700 51 103 4.84 0.1 (mm) Part No. Terminal Pitch (mm) 3 point clamp 5600 51 125 5.93 0.1 22.0 ECEG2CG562J( ) N C F 6800 51 145 7.03 0.1 22.0 ECEG2CG682H( ) N C F 64 103 7.03 0.1 28.6 ECEG2CG682G( ) N C F 8200 64 125 9.01 0.1 28.6 ECEG2CG822F( ) N C F 10000 64 145 10.5 0.1 28.6 ECEG2CG103E( ) N C F 12000 77 125 12.5 0.1 31.8 ECEG2CG123D( ) N C F 15000 77 145 14.8 0.1 31.8 ECEG2CG153C( ) N C 22000 90 150 20.0 0.1 31.8 ECEG2CG223A( ) N 1500 36 83 1.81 0.1 13.0 ECEG2DG152P( ) N 1800 36 103 2.21 0.1 13.0 ECEG2DG182N( ) N F 2200 36 125 2.73 0.1 13.0 ECEG2DG222M( ) N F 2700 51 83 3.30 0.1 22.0 ECEG2DG272L( ) N C F 3900 51 103 4.95 0.1 22.0 ECEG2DG392K( ) N C F 4700 51 125 5.83 0.1 22.0 ECEG2DG472J( ) N C F 5600 51 145 6.37 0.1 22.0 ECEG2DG562H( ) N C F F F F 64 103 6.37 0.1 28.6 ECEG2DG562G( ) N C F 6800 64 125 8.24 0.1 28.6 ECEG2DG682F( ) N C F 9.67 8200 64 145 0.1 28.6 ECEG2DG822E( ) N C F 12000 77 125 12.5 0.1 31.8 ECEG2DG123D( ) N C F 15000 77 145 14.8 0.1 31.8 ECEG2DG153C( ) N C F 18000 90 150 19.0 0.1 31.8 ECEG2DG183A( ) N 1000 36 83 1.62 0.1 13.0 ECEG2EG102P( ) N 1200 36 103 1.77 0.1 13.0 ECEG2EG122N( ) N F 1500 36 125 2.47 0.1 13.0 ECEG2EG152M( ) N F 1800 51 83 2.78 0.1 22.0 ECEG2EG182L( ) N C F 2700 51 103 3.81 0.1 22.0 ECEG2EG272K( ) N C F 3300 51 125 4.77 0.1 22.0 ECEG2EG332J( ) N C F 3900 51 145 5.68 0.1 22.0 ECEG2EG392H( ) N C F F F 64 103 5.68 0.1 28.6 ECEG2EG392G( ) N C F 4700 64 125 7.16 0.1 28.6 ECEG2EG472F( ) N C F 5600 64 145 8.30 0.1 28.6 ECEG2EG562E( ) N C F 8200 77 125 10.3 0.1 31.8 ECEG2EG822D( ) N C F 10000 77 145 12.3 0.1 31.8 ECEG2EG103C( ) N C F 12000 90 150 15.8 0.1 31.8 ECEG2EG123A( ) N 470 36 83 1.10 0.1 13.0 ECEG2VG471P( ) N F 680 36 103 1.52 0.1 13.0 ECEG2VG681N( ) N F 820 36 125 1.84 0.1 13.0 ECEG2VG821M( ) N F F Endurance : 105°C 2000 h Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE192 – Aluminium Electrolytic Capacitors/GNH ■ Standard Products Case size W.V. Cap. (-10 to +30%) (V) 400 Length Discontinued Specification Ripple D.F. current (120Hz) (120Hz) (+105°C) (+20°C) (A) Part No. Terminal Pitch ( ):Mounting Clamp No 2point 3 point clamp clamp (µF) (mm) (mm) 1000 51 83 2.07 0.1 22.0 ECEG2VG102L( ) 1200 51 103 2.52 0.1 22.0 ECEG2VG122K( ) N C F 1500 51 125 3.18 0.1 22.0 ECEG2VG152J( ) N C F 1800 350 Dia. (mm) N C F 51 145 3.75 0.1 22.0 ECEG2VG182H( ) N C F 64 103 3.75 0.1 28.6 ECEG2VG182G( ) N C F 2200 64 125 4.89 0.1 28.6 ECEG2VG222F( ) N C F 2700 64 145 5.74 0.1 28.6 ECEG2VG272E( ) N C F 3900 77 125 7.16 0.1 31.8 ECEG2VG392D( ) N C F 4700 77 145 8.53 0.1 31.8 ECEG2VG472C( ) N C F 6800 90 150 0.1 31.8 ECEG2VG682A( ) N 390 36 83 1.08 0.1 13.0 ECEG2GG391P( ) N F 470 36 103 1.32 0.1 13.0 ECEG2GG471N( ) N F 560 36 125 1.62 0.1 13.0 ECEG2GG561M( ) N F 820 51 83 1.90 0.1 22.0 ECEG2GG821L( ) N C F 1000 51 103 2.41 0.1 22.0 ECEG2GG102K( ) N C F 1200 51 125 2.83 0.1 22.0 ECEG2GG122J( ) N C F 1500 51 145 3.45 0.1 22.0 ECEG2GG152H( ) N C F 1800 64 103 4.08 0.1 28.6 ECEG2GG182G( ) N C F 2200 64 125 4.94 0.1 28.6 ECEG2GG222F( ) N C F 2700 64 145 5.75 0.1 28.6 ECEG2GG272E( ) N C F 3300 77 125 6.63 0.1 31.8 ECEG2GG332D( ) N C F 3900 77 145 7.79 0.1 31.8 ECEG2GG392C( ) N C F 5600 90 150 0.1 31.8 ECEG2GG562A( ) N 12.1 11.1 F F Endurance : 105°C 2000 h Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE193 –