DF15005S thru DF1510S Vishay Semiconductors Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers Case Style DFS Major Ratings and Characteristics IF(AV) 1.5 A VRRM 50 V to 1000 V IFSM 50 A IR 5 µA VF 1.1 V Tj max. 150 °C ~ ~ ~ Pr od uc t ~ Features • • • • Mechanical Data UL Recognition, file number E54214 Ideal for automated placement High surge current capability Meets MSL level 1, per J-STD-020C Typical Applications Maximum Ratings N ew General purpose use in ac-to-dc bridge full wave rectification for SMPS, Lighting Ballaster, Adapter, Battery Charger, Home Appliances, Office Equipment, and Telecommunication applications Case: DFS Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and MIL-STD-750, Method 2026 Polarity: As marked on body (TA = 25 °C unless otherwise noted) Parameter Symbol DF 15005S DF 1501S DF 1502S DF 1504S DF 1506S DF 1508S DF 1510S Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward output rectified IF(AV) 1.5 A IFSM 50 A I2 t 10 A2sec TJ, TSTG - 55 to + 150 °C current at TA = 40 °C(2) Peak forward surge current single half sinewave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range Document Number 88570 09-Dec-04 www.vishay.com 1 DF15005S thru DF1510S Vishay Semiconductors Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Test condition Symbol DF 15005S DF 1501S DF 1502S DF 1504S DF 1506S DF 1508S DF 1510S Unit Max. instantaneous forward voltage drop per leg at 1.5 A VF 1.1 V Maximum DC reverse current at rated DC blocking voltage per leg TA = 25 °C TA = 125 °C IR 5.0 500 µA CJ 25 pF Typical junction capacitance per leg (1) Thermal Characteristics (TA = 25 °C unless otherwise noted) Parameter Symbol DF 15005S DF 1501S DF 1502S RθJA RθJL Typical thermal resistance per leg(2) DF 1504S DF 1506S DF 1508S DF 1510S 40 15 Unit °C/W Notes: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Units mounted on P.C.B. with 0.51 x 0.51" (13 x 13 mm) copper pads Ratings and Characteristics Curves (TA = 25 °C unless otherwise noted) 60 60 Hz Resistive or Inductive Load 1.0 0.5 P.C.B mounted on 0.51 x 0.51" (13 x 13 mm) Copper pads 0 20 40 60 80 100 120 140 160 Ambient Temperature ( °C) Figure 1. Derating Curve Output Rectified Current www.vishay.com 2 Peak Forward Surge Current (A) Average Forward Output Current (A) 1.5 TJ = 150 °C 50 Single Sine-Wave 40 30 20 1.0 Cycle 10 0 1 10 100 Number of Cycles at 60 Hz Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Leg Document Number 88570 09-Dec-04 DF15005S thru DF1510S Vishay Semiconductors 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 10 1 0.1 TJ = 25 °C Pulse width = 300µs 1% Duty Cycle TJ = 25 °C f = 1.0 MHz Vsig = 50mVp-p 10 1 0.01 0.4 0.6 1.0 0.8 1.2 10 1 1.4 Figure 5. Typical Junction Capacitance Per Leg Figure 3. Typical Forward Characteristics Per Leg 100 10 Transient Thermal Impedance ( °C/W) 100 Instantaneous Reverse Current (µA) 100 Reverse Voltage (V) Instantaneous Forward Voltage (V) TJ = 125 °C 1 0.1 TJ = 50 °C 10 1 0.1 0.01 0 20 40 60 80 0.01 100 1 0.1 100 10 t, Heating Time (sec.) Percent of Rated Peak Reverse Voltage (V) Figure 6. Typical Transient Thermal Impedance Figure 4. Typical Reverse Leakage Characteristics Per Leg Package outline dimensions in inches (millimeters) g 0.205 (5.2) 0.195 (5.0) 0.047 (1.20) 0.040 (1.02) y 0.047 Min. (1.20 Min.) 0.404 Max. (10.26 Max.) 0.060 Min. (1.52 Min.) 0.404 (10.3) 0.386 (9.80) 0.335 (8.51) 0.320 (8.13) 45o 0.255 (6.5) 0.245 (6.2) 0.130 (3.3) 0.120 (3.05) 0.013 (0.330) 0.009 (0.241) 0.060 (1.524) 0.040 (1.016) Document Number 88570 09-Dec-04 0.205 (5.2) 0.195 (5.0) 0.013 (0.330) 0.003 (0.076) www.vishay.com 3