April 12, 2011 SMD INDUCTOR DR355-3 SERIES Features Low Profile Surface Mount Design Suitable for Reflow soldering Inductance Range from 22nH to 120nH Operating Temp. -40°C to +125°C Tinned Leads with Leaded Solder is Available (note 3) ELECTRICAL SPECIFICATIONS AT 25ºC PART NO. DR355-3-223 DR355-3-273 DR355-3-333 DR355-3-393 DR355-3-473 DR355-3-563 DR355-3-683 DR355-3-823 DR355-3-104 DR355-3-124 INDUCTANCE (nH) @ 0A 225% 275% 335% 395% 475% 565% 685% 825% 1005% 1205% Q Min. Test Freq. (MHz) SRF (MHz) Min. DCR (m) MAX. 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 3200 2700 2500 2100 2100 1500 1500 1300 1200 1100 4.2 4.0 4.8 4.4 5.6 6.2 8.2 9.4 12.3 17.3 MAX. RATED CURRENT (A) (TYP.) 3.0 3.5 3.0 3.0 3.0 3.0 2.5 2.5 1.7 1.5 . MECHANICAL OUTLINES Typical Response Curves for DR355s NOTES: 1. 2. 3. 4. All dimensions shown are in “mm”. Tape and reel quantity, 750 pcs/reel For non-RoHS parts replace DR prefix with 42- (e.g. DR355-3 becomes 42-355-3) Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice