LANEH2 SERIES 3KVDC I/O Isolation Single and Dual Output 2 Watt DC/DC Converter FEATURES ● 7 Pin SIP Package ● 3000VDC Isolation ● Single and Dual Outputs ● Unregulated Output Types ● UL 94V-0 Package Material ● 3.3, 5, 12, 15, 24, and 48VDC Input Voltages Available DESCRIPTION When your application demands low power, minimal board space, and a high level of input/output isolation is necessary, the LANEH2 miniature converters offer superior solutions at an economical price. Users have a multitude of options and operational ratings to choose from in custom-tailoring the converter to application demands. Populating a scant 0.179 square inches of board space, the LANEH2 provides two watts of power while maintaining specifications over the entire commercial operating temperature range. SPECIFICATIONS: LANEH2 Series All specifications apply @ ±25°C ambient unless otherwise noted INPUT SPECIFICATIONS GENERAL SPECIFICATIONS Input Voltage Range .......3.3V nom. input .......... 3.14 – 3.47 VDC 5V nom. input .............. 4.75 – 5.25VDC 12V nom. input ............. 11.4– 12.6VDC 15V nom. Input ........ 14.25 – 15.75VDC 24V nom. input ........... 22.8 – 25.2 VDC 48V nom. input ........... 45.6 – 50.4 VDC Switching Frequency ............................................. 100KHz typical OUTPUT SPECIFICATIONS Output Current ................................................................ see table Efficiency .....................................................................75% typical Isolation Voltage (input to output) ..............3000VDC (2sec/0.5mA) Isolation Resistance.................................. 1000MΩ min. (500VDC) ENVIRONMENTAL SPECIFICATIONS Output Voltage ................................................................ see table Operating Temperature .............................................. 0°C ~ +70°C “I” suffix................................................................. -40°C ~ +85°C Output Voltage Accuracy ....................................................... ±5% Humidity.........................................................95% non-condensing Line Regulation ........................................1.2%/1% of Vin (typical) Cooling .............................................................Free air convection Load Regulation (10% to 100% full load) .......................10% max. PHYSICAL SPECIFICATIONS Ripple/Noise (20MHz BW) ................................... 150mVp-p max. Weight .....................................................Approximately 2.1 grams PROTECTION Case Material......................................non-conductive black plastic Short Circuit Protection .................................................Short term Dimensions ...............................19.50(L) x 7.10(W) x 10.00(H) mm Due to advances in technology, specifications subject to change without notice Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEH2 SERIES 3KVDC I/O Isolation Single and Dual Output 2 Watt DC/DC Converter OUTPUT VOLTAGE / CURRENT RATING CHART Model LANE3.305NH2 LANE3.309NH2 LANE3.312NH2 LANE3.315NH2 LANE3.305NDH2 LANE3.309NDH2 LANE3.312NDH2 LANE3.315NDH2 LANE505NH2 LANE509NH2 LANE512NH2 LANE515NH2 LANE505NDH2 LANE509NDH2 LANE512NDH2 LANE515NDH2 LANE1205NH2 LANE1209NH2 LANE1212NH2 LANE1215NH2 LANE1205NDH2 LANE1209NDH2 LANE1212NDH2 LANE1215NDH2 LANE1505NH2 LANE1509NH2 LANE1512NH2 LANE1515NH2 LANE1505NDH2 LANE1509NDH2 LANE1512NDH2 LANE1515NDH2 LANE2405NH2 LANE2409NH2 LANE2412NH2 LANE2415NH2 LANE2405NDH2 LANE2409NDH2 LANE2412NDH2 LANE2415NDH2 LANE4805NH2 LANE4809NH2 LANE4812NH2 LANE4815NH2 LANE4805NDH2 LANE4809NDH2 LANE4812NDH2 LANE4815NDH2 Input Voltage Range 3.3 VDC (3.135 – 3.465 VDC) 5 VDC (4.75 – 5.25 VDC) 12 VDC (11.4 – 12.6 VDC) 15 VDC (14.25 – 15.75 VDC) 24 VDC (22.8 – 25.2 VDC) 48 VDC (45.6 – 50.4 VDC) Output Voltage Output Current 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±9 VDC ±12 VDC ±15 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±9 VDC ±12 VDC ±15 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±9 VDC ±12 VDC ±15 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±9 VDC ±12 VDC ±15 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±9 VDC ±12 VDC ±15 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±9 VDC ±12 VDC ±15 VDC 400mA 222mA 167mA 133mA ±200mA ±111mA ±83mA ±67mA 400mA 222mA 167mA 133mA ±200mA ±111mA ±83mA ±67mA 400mA 222mA 167mA 133mA ±200mA ±111mA ±83mA ±67mA 400mA 222mA 167mA 133mA ±200mA ±111mA ±83mA ±67mA 400mA 222mA 167mA 133mA ±200mA ±111mA ±83mA ±67mA 400mA 222mA 167mA 133mA ±200mA ±111mA ±83mA ±67mA Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEH2 SERIES 3KVDC I/O Isolation Single and Dual Output 2 Watt DC/DC Converter NOTES 1. For industrial grade operating temperature of -40°C ~ +85°C add the suffix “I” to the part number. (Ex: LANE2405NH2I). 2. All tolerances for the mechanical drawing are ±0.25. 3. Dimensions of the mechanical drawing are shown in millimeters. DERATING CURVE "I" Suffix Version 100 90 Output Power (%) 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 85 100 110 Case Surface Temperature (°C ) MECHANICAL DRAWINGS Unit: mm PIN CONNECTION PIN 1 2 5 6 7 SINGLE OUTPUT +Vin -Vin -Vout No Pin +Vout Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DUAL OUTPUT +Vin -Vin -Vout COM +Vout