AVAGO HDSP-70XA 17.3 mm (0.68 inch) general purpose 5x7 dot matrix alphanumeric display Datasheet

HDSP-70xE
17.3 mm (0.68 inch) General Purpose
5x7 Dot Matrix Alphanumeric Displays
Data Sheet
HDSP-70xE Series, HDSP-71xE Series
HDSP-70xG Series, HDSP-71xG Series
HDSP-70xA Series, HDSP-71xA Series
Description
Features
These displays have a 17.3 mm (0.68 inch) character
height and use industry standard size and pin-out.
The devices are available in either common row
anode or common row cathode configurations. The
displays come in either gray or black face paint and are
available in a choice of high efficiency red (HER) or green
colors or AlGaAs.
•
•
•
•
These parts are subjected to Outgoing Quality Assurance
(OQA) inspection with an AQL of 0.065% for functional
and visual/cosmetic defects.
•
•
For optimal intensity performance, please consider our
industrial grade displays:
•
• HDSP-L20x
• HDSP-540x
• HDSP-L10x
•
•
5 x 7 dot matrix font
Viewable up to 12 meters
X-Y stackable
Industry standard pin-out
7.6 mm (0.3 in.) Dual-in-Line (DIP) leads on 2.54 mm
(0.1 in.) centers
Choice of colors
Red or Green or AlGaAs
Choice of face paint colors
Gray or black
Design flexibility
Common row anode or common row cathode
Categorized for luminous intensity
Green categorized for color
Applications
• Suitable for indoor use
• Not recommended for industrial applications, i.e., operating temperature requirements exceeding 85°C or
Below -40°C [1]
• Extreme temperature cycling not recommended [2]
Devices
HER HDSP701E
703E
711E
713E
Green HDSP701G
703G
711G
713G
AlGaAs HDSP701A
703A
711A
713A
Description
17.3 mm Gray Surface Common Row Anode
17.3 mm Gray Surface Common Row Cathode
17.3 mm Black Surface Common Row Anode
17.3 mm Black Surface Common Row Cathode
Notes:
1. For details, please contact your local Avago components sales office or an authorized distributor.
Package Dimensions
12.7 (0.50)
MAX.
6.3
(0.25)
10.16 (0.40)
1.3 (0.05)
2.54 (0.10)
PIN 1
2.54
(0.10)
17.78
MAX.
(0.70)
12.7 (0.50)
15.24 (0.600)
2.54
(0.10)
PIN 6
PART NO.
COL 1
2
3
4
35 – ∅ 1.9 (0.075)
5
ROW 1
8 – 21.8
2
8 – 3 (0.118)
8 – 2.5 (0.098)
3
4
5.1 ± 0.5 (0.201)
12 – ∅ 0.5 (0.02)
5
6
7.62 (0.03)
7
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. UNLESS OTHERWISE STATED, TOLERANCE IS ± 0.25 mm (0.010).
3. FOR GREEN ONLY.
Internal Circuit Diagram
COMMON ANODE ROW
COMMON CATHODE ROW
COLUMN
1
ROW
1
2
3
3
10
4
7
COLUMN
5
8
1
ROW
4
2
3
3
7
4
9
5
12
COMMON ROW ANODE
HDSP-701E/711E/
PIN 701G/711G/701A/711A
COMMON ROW CATHODE
HDSP-703E/713E/
PIN 703G/713G/703A/713A
1
2
3
COLUMN 1 CATHODE
ROW 3 ANODE
COLUMN 2 CATHODE
1
2
3
ROW 1 CATHODE
ROW 2 CATHODE
COLUMN 2 ANODE
4
5
ROW 5 ANODE
ROW 6 ANODE
4
5
COLUMN 1 ANODE
ROW 6 CATHODE
6
7
8
ROW 7 ANODE
COLUMN 4 CATHODE
COLUMN 5 CATHODE
6
7
8
ROW 7 CATHODE
COLUMN 3 ANODE
ROW 5 CATHODE
1 12
1 1
2 11
2 2
3 2
3 11
4 9
4 10
5 4
5 8
9
10
ROW 4 ANODE
COLUMN 3 CATHODE
9
10
COLUMN 4 ANODE
ROW 4 CATHODE
6 5
6 5
7 6
7 6
11
12
ROW 2 ANODE
ROW 1 ANODE
11
12
ROW 3 CATHODE
COLUMN 5 ANODE
x = ROW OR COLUMN NUMBER, x = PIN NUMBER
HDSP-70XE Internal Circuit Diagram
Absolute Maximum Ratings at TA = 25°C
Parameter
Average Power per Dot[1]
Peak Forward Current per Dot[1,2]
(1/10 Duty Cycle, 0.1 ms Pulse Width)
Average Forward Current per Dot[1]
Reverse Voltage per Dot
Operating Temperature
Storage Temperature
Wave Soldering Temperature for 3 seconds[3]
(1.6 mm [0.063 in.] below Body)
HER
HDSP-701E/
711E/703E/
713E
75
90
AlGaAs
HDSP-701A/
703A/711A/
713A
75
125
Green
HDSP-701G/
711G/703G/
713G
75
90
Units
mW
mA
23
5
–40 to +85
–40 to +85
250
23[3]
5
–40 to +85
–40 to +85
250
15[2]
5
–40 to +85
–40 to + 85
250
mA
V
°C
°C
°C
Notes:
1. Do not exceed maximum average current per dot.
2. Derate above 35°C at 0.2 mA/°C.
3. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 5
seconds.
Optical/Electrical Characteristics at TA = 25°C
High Efficiency Red
Devices
HDSP-
701E
711E
703E
713E
Parameter
Luminous Intensity/Dot
(Digit Average)[1]
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage
Symbol
IV
Min.
1.289
lPEAK
ld
VF
Typ.
2.500
Max.
632
622
2.05
3.40
2.50
Units
mcd
nm
nm
V
1.60
Reverse Voltage[3]VR
Luminous Intensity
Matching Ratio
5
IV-M
V
2:1
Test
Conditions
IF = 50 mA,
20% Duty Factor
IF = 20 mA
IF = 20 mA
IF = 50 mA
IF = 20 mA
IF = 5 mA
IR = 100 µA
IF = 50 mA
20% Duty Factor
Optical/Electrical Characteristics at TA = 25°C, continued
Green
Devices
HDSP-
701G
711G
703G
713G
Parameter
Luminous Intensity/Dot
(Digit Average)[1]
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage
Symbol
IV
Min.
0.96
lPEAK
ld
VF
Max.
568
573
1.80
1.60
Reverse Voltage[3]VR
Luminous Intensity
Matching Ratio
Typ.
2.50
2.25
3.40
2.60
5
Units
mcd
nm
nm
V
V
IV-M
2:1
Test
Conditions
IF = 50 mA,
20% Duty Factor
IF = 20 mA
IF = 20 mA
IF = 50 mA
IF = 20 mA
IF = 5 mA
IR = 100 µA
IF = 50 mA
20% Duty Factor
AlGaAs
Devices
HDSP-
701A
711A
703A
713A
Parameter
Luminous Intensity/Dot
(Digit Average)[1]
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage
Symbol
IV
Min.
1.55
lPEAK
ld
VF
Typ.
2.10
660
643
1.8
Max.
2.0
2.0
Units
mcd
nm
nm
V
1.5
Reverse Voltage[3]VR
5
Luminous Intensity
Matching Ratio
IV-M
V
1.5:1
Test
Conditions
IF = 10 mA,
20% Duty Factor
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 10 mA
IF = 5 mA
IR = 100 µA
IF = 10 mA
20% Duty Factor
Notes:
1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
2. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Typical specification for reference only. Do not exceed absolute maximum ratings.
30
GREEN, HER
25
20
15
AlGaAs
10
5
0
0
20
40
60
80
100
IF – FORWARD CURRENT PER SEGMENT – mA
IDC – MAXIMUM DC CURRENT PER SEGMENT – mA
35
90
80
70
AlGaAs
60
50
40
30
20
GREEN
10
0
1
AlGaAs
2.0
1.5
1.0
0.5
0
0
5
10
15
20
25
30
35
IF – DC FORWARD CURRENT – mA
Figure 3. Relative Luminous Intensity vs.
DC Forward Current.
HDSP-70XE fig 3
40
ηV – RELATIVE EFFICIENCY
(NORMALIZED TO/AT 10 mA PER SEGMENT)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
GREEN, HER
2.5
4
5
HDSP-70XE fig 2
4.0
3.0
3
Figure 2. Forward Current vs. Forward Voltage.
HDSP-70XE fig 1
3.5
2
VF – FORWARD VOLTAGE – V
TA – AMBIENT TEMPERATURE – C
Figure 1. Maximum Allowable Average Current
Per Dot vs. Ambient Temperature.
HER
1.4
1.3
RED
GREEN
1.2
1.1
1.0
AlGaAs
0.9
0.8
0 10 20 30 40 50 60 70 80 90 100
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 4. Relative Efficiency (Luminous Intensity
Per Unit Current Per Dot) vs. Peak Current Per Dot.
HDSP-70XE fig 4
Intensity Bin Limits[1] (mcd at 50 mA, 20% Duty Factor)
Color Bin Limits (Dominant Wavelength)
High Efficiency Red
Color
Bin
Green
2
3
4
5
Dominant Wavelength (nm)
Min.
Max.
573.6
576.5
570.6
573.5
567.6
570.5
564.5
567.5
Bin name
Min.[2]
Max.[2]
E
1.289
1.934
F
1.934
2.900
G
2.900
4.350
H
4.350
6.525
Bin name
Min.[2]
Max.[2]
H
0.96
1.44
I
1.44
2.15
J
2.15
3.23
Soldering/Cleaning
K
3.23
4.85
L
4.85
7.28
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloro-ethylene,
carbon tetrachloride, etc.) are not recommended
for cleaning LED parts. All of these various solvents
attack or dissolve the encapsulating epoxies used
to form the package of plastic LED parts.
Green
Notes:
1. Bin categories are established for classification of products.
Products may not be available in all bin categories.
2. Tolerance for each intensity bin limit is ±10%.
(mcd at 10 mA, 20% Duty Factor)
Note:
All categories are established for classification of products. Products may
not be available in all categories. Please contact your local Avago representatives for further clarification/information.
Contrast Enhancement
For information on contrast enhancement, please see
Application Note 1015.
For information on soldering LEDs, please refer to Application Note 1027.
AlGaAs
Bin name
Min.[2]
Max.[2]
I
1.55
2.33
J
2.33
3.49
Notes:
1. Bin categories are established for classification of products.
Products may not be available in all bin categories.
2. Tolerance for each intensity bin limit is ±10%.
For product information and a complete list of distributors, please go to our website:
Device Reliability
For reliability information, please see the reliability
datasheet
17.3 mm General Purpose
5 x 7 Dot Matrix Alphanumeric Displays.
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5988-8400EN
AV02-0450EN - May 23, 2007
Similar pages