LMP8640 LMP8640HV www.ti.com SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 Precision High Voltage Current Sense Amplifier Check for Samples: LMP8640, LMP8640HV FEATURES 1 • • 2 • • • • • • • Typical Values, TA = 25°C High Common-Mode Voltage Range – LMP8640: -2V to 42V – LMP8640HV: -2V to 76V Supply Voltage Range: 2.7V to 12V Gain Options: 20V/V; 50V/V; 100V/V Max Gain Error: 0.25% Low Offset Voltage: 900µV Input Bias Current: 13 µA PSRR: 85 dB CMRR (2.1V to 42V): 103 dB • • Temperature Range: -40°C to 125°C 6-Pin SOT Package APPLICATIONS • • • • • • High-Side Current Sense Vehicle Current Measurement Motor Controls Battery Monitoring Remote Sensing Power Management DESCRIPTION The LMP8640 and the LMP8640HV are precision current sense amplifiers that detect small differential voltages across a sense resistor in the presence of high input common mode voltages with a supply voltage range from 2.7V to 12V. The LMP8640 accepts input signals with common mode voltage range from -2V to 42V, while the LMP8640HV accepts input signal with common mode voltage range from -2V to 76V. The LMP8640 and LMP8640HV have fixed gain for applications that demand accuracy over temperature. The LMP8640 and LMP8640HV come out with three different fixed gains 20V/V, 50V/V, 100V/V ensuring a gain accuracy as low as 0.25%. The output is buffered in order to provide low output impedance. This high side current sense amplifier is ideal for sensing and monitoring currents in DC or battery powered systems, excellent AC and DC specifications over temperature, and keeps errors in the current sense loop to a minimum. The LMP8640 and LMP8640HV are ideal choice for industrial, automotive and consumer applications, and it is available in SOT-6 package. 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2010–2011, Texas Instruments Incorporated LMP8640 LMP8640HV SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 www.ti.com Typical Application IS + RS +IN -IN RIN + L o a d LMP8640 RIN + V + VA G ADC VOUT RG = 2*RIN V - G = 10 V/V in 20 V/V gain option G = 25 V/V in 50 V/V gain option G = 50 V/V in 100 V/V gain option These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings ESD Tolerance (4) (1) (2) (3) Human Body Model For input pins +IN, -IN 5000V For all other pins 2000V Machine Model 200V Charge device model 1250V Supply Voltage (VS = V+ - V−) 13.2V Differential Voltage +IN- (-IN) Voltage at pins +IN, -IN 6V LMP8640HV -6V to 80V LMP8640 -6V to 60V V-to V+ Voltage at VOUT pin Storage Temperature Range Junction Temperature (1) (2) (3) (4) (5) 2 -65°C to 150°C (5) 150°C “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in the Operating Ratings is not implied. Operating Ratings indicate conditions at which the device is functional and the device should not be operated beyond such conditions. For soldering specifications,see product folder at www.national.com and www.national.com/ms/MS/MS-SOLDERING.pdf If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and specifications. Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of JEDEC) Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC). The maximum power dissipation must be derated at elevated temperatures and is dictated by TJ(MAX), θJA, and the ambient temperature, TA. The maximum allowable power dissipation PDMAX = (TJ(MAX) - TA)/ θJA or the number given in Absolute Maximum Ratings, whichever is lower. Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV LMP8640 LMP8640HV www.ti.com SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 Operating Ratings (1) Supply Voltage (VS = V+ - V−) Temperature Range 2.7V to 12V (2) -40°C to 125°C Package Thermal Resistance (2) SOT-6 (1) (2) 96°C/W “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in the Operating Ratings is not implied. Operating Ratings indicate conditions at which the device is functional and the device should not be operated beyond such conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by TJ(MAX), θJA, and the ambient temperature, TA. The maximum allowable power dissipation PDMAX = (TJ(MAX) - TA)/ θJA or the number given in Absolute Maximum Ratings, whichever is lower. 2.7V Electrical Characteristics (1) Unless otherwise specified, all limits guaranteed for at TA = 25°C, VS=V+ – V-, VSENSE= +IN-(-IN), V+ = 2.7V, V− = 0V, −2V < VCM < 76V, RL = 10MΩ. Boldface limits apply at the temperature extremes. Parameter Test Conditions VOS Input Offset Voltage TCVOS Input Offset Voltage Drift (4) IB Input Bias Current eni PSRR CMRR BW (1) (2) (3) (4) (5) (6) (5) Typ (3) -900 -1160 VCM = 2.1V (6) Max (2) Unit 900 1160 µV 2.6 µV/°C 20 27 µA VCM = 2.1V 12 f > 10 kHz 117 nV/√Hz Fixed Gain LMP8640-T LMP8640HV-T 20 V/V Fixed Gain LMP8640-F LMP8640HV-F 50 V/V Fixed Gain LMP8640-H LMP8640HV-H 100 V/V Input Voltage Noise Gain AV VCM = 2.1V Min (2) (5) -0.25 -0.51 Gain error VCM = 2.1V Accuracy over temperature (5) −40°C to 125°C, VCM=2.1V Power Supply Rejection Ratio VCM = 2.1V, 2.7V < V+ < 12V, 85 LMP8640HV 2.1V < VCM < 42V LMP8640 2.1V < VCM< 42V 103 LMP8640HV 2.1V < VCM < 76V 95 -2V <VCM < 2V, 60 Common Mode Rejection Ratio 0.25 0.51 % 26.2 ppm/°C dB dB Fixed Gain LMP8640-T LMP8640HV-T (5) DC VSENSE = 67.5 mV, CL = 30 pF,RL= 1MΩ 950 Fixed Gain LMP8640-F LMP8640HV-F (5) DC VSENSE =27 mV, CL = 30 pF, RL= 1MΩ 450 Fixed Gain LMP8640-H LMP8640HV-H (5) DC VSENSE = 13.5 mV, CL = 30 pF ,RL= 1MΩ 230 kHz Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. Absolute Maximum Ratings indicate junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically. Limits are 100% production tested at 25°C. Limits over the operating temperature range are guaranteed through correlations using statistical quality control (SQC) method. Typical values represent the most likely parametric norm at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. Offset voltage temperature drift is determined by dividing the change in VOS at the temperature extremes by the total temperature change. This parameter is guaranteed by design and/or characterization and is not tested in production. Positive Bias Current corresponds to current flowing into the device. Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV Submit Documentation Feedback 3 LMP8640 LMP8640HV SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 www.ti.com 2.7V Electrical Characteristics (1) (continued) Unless otherwise specified, all limits guaranteed for at TA = 25°C, VS=V+ – V-, VSENSE= +IN-(-IN), V+ = 2.7V, V− = 0V, −2V < VCM < 76V, RL = 10MΩ. Boldface limits apply at the temperature extremes. Parameter VCM =5V, CL = 30 pF, RL = 1MΩ, LMP8640-T LMP8640HV-T VSENSE =100mVpp, LMP8640-F LMP8640HV-F VSENSE =40mVpp, LMP8640-H LMP8640HV-H VSENSE =20mVpp, (7) (5) SR Slew Rate RIN Differential Mode Input Impedance (5) IS Typ (3) VOUT 5 kΩ 420 600 800 VCM = −2V 2000 2500 2750 2.65 µA V LMP8640-T LMP8640HV-T VCM = 2.1V 18.2 LMP8640-F LMP8640HV-F VCM = 2.1V 40 LMP8640-H LMP8640HV-H VCM = 2.1V 80 Max Output Capacitance Load (5) CLOAD Unit V/µs VCM = 2.1V VCM = 2.1V Minimum Output Voltage Max (2) 1.4 Supply Current Maximum Output Voltage (7) Min (2) Test Conditions 30 mV pF The number specified is the average of rising and falling slew rates and measured at 90% to 10%. 5V Electrical Characteristics (1) Unless otherwise specified, all limits guaranteed for at TA = 25°C, VS=V+ – V-, VSENSE= +IN-(-IN), V+ = 5V, V− = 0V, −2V < VCM < 76V, RL = 10MΩ. Boldface limits apply at the temperature extremes. Max (2) Unit 900 1160 µV VCM = 2.1V 2.6 µV/°C VCM = 2.1V 13 21 28 µA f > 10 kHz Parameter VOS Input Offset Voltage TCVOS Input Bias Current eni PSRR (1) (2) (3) (4) (5) (6) 4 (6) Input Voltage Noise Gain AV (4) (5) (5) Typ (3) -900 -1160 VCM = 2.1V Input Offset Voltage Drift IB Min (2) Test Conditions 117 nV/√Hz Fixed Gain LMP8640-T LMP8640HV-T 20 V/V Fixed Gain LMP8640-F LMP8640HV-F 50 V/V Fixed Gain LMP8640-H LMP8640HV-H 100 V/V -0.25 -0.51 Gain error VCM = 2.1V Accuracy over temperature (5) −40°C to 125°C, VCM=2.1V Power Supply Rejection Ratio + VCM = 2.1V, 2.7V < V < 12V, 85 0.25 0.51 % 26.2 ppm/°C dB Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. Absolute Maximum Ratings indicate junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically. Limits are 100% production tested at 25°C. Limits over the operating temperature range are guaranteed through correlations using statistical quality control (SQC) method. Typical values represent the most likely parametric norm at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. Offset voltage temperature drift is determined by dividing the change in VOS at the temperature extremes by the total temperature change. This parameter is guaranteed by design and/or characterization and is not tested in production. Positive Bias Current corresponds to current flowing into the device. Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV LMP8640 LMP8640HV www.ti.com SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 5V Electrical Characteristics (1) (continued) Unless otherwise specified, all limits guaranteed for at TA = 25°C, VS=V+ – V-, VSENSE= +IN-(-IN), V+ = 5V, V− = 0V, −2V < VCM < 76V, RL = 10MΩ. Boldface limits apply at the temperature extremes. Parameter CMRR BW Common Mode Rejection Ratio 103 LMP8640HV 2.1V < VCM < 76V 95 -2V <VCM < 2V, 60 950 Fixed Gain LMP8640-F LMP8640HV-F (5) DC VSENSE =27 mV, CL = 30 pF ,RL= 1MΩ 450 Fixed Gain LMP8640-H LMP8640HV-H (5) DC VSENSE = 13.5 mV, CL = 30 pF ,RL= 1MΩ 230 VCM =5V, CL = 30 pF, RL = 1MΩ, LMP8640-T LMP8640HV-T VSENSE =200mVpp, LMP8640-F LMP8640HV-F VSENSE =80mVpp, LMP8640-H LMP8640HV-H VSENSE =40mVpp, 1.6 (7) (5) RIN Differential Mode Input Impedance (5) VOUT CLOAD kHz V/µs kΩ VCM = 2.1V 500 722 922 VCM = −2V 2050 2500 2750 VCM = 2.1V Minimum Output Voltage Unit 5 Supply Current Maximum Output Voltage Max (2) dB DC VSENSE = 67.5 mV, CL = 30 pF ,RL= 1MΩ Slew Rate (7) LMP8640HV 2.1V < VCM < 42V LMP8640 2.1V < VCM< 42V Typ (3) Fixed Gain LMP8640-T LMP8640HV-T (5) SR IS Min (2) Test Conditions µA 4.95 V LMP8640-T LMP8640HV-T VCM = 2.1V 18.2 LMP8640-F LMP8640HV-F VCM = 2.1V 40 LMP8640-H LMP8640HV-H VCM = 2.1V 80 Max Output Capacitance Load (5) mV 30 pF The number specified is the average of rising and falling slew rates and measured at 90% to 10%. 12V Electrical Characteristics (1) Unless otherwise specified, all limits guaranteed for at TA = 25°C, VS=V+ – V-, VSENSE= +IN-(-IN), V+ = 12V, V− = 0V, −2V < VCM < 76V, RL = 10MΩ. Boldface limits apply at the temperature extremes. Max (2) Unit 900 1160 µV VCM = 2.1V 2.6 µV/°C VCM = 2.1V 13 22 28 µA f > 10 kHz 117 Parameter Test Conditions VOS Input Offset Voltage TCVOS Input Offset Voltage Drift (4) Input Bias Current eni Input Voltage Noise (2) (3) (4) (5) (6) (5) (6) IB (1) VCM = 2.1V (5) Min (2) Typ (3) -900 -1160 nV/√Hz Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. Absolute Maximum Ratings indicate junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically. Limits are 100% production tested at 25°C. Limits over the operating temperature range are guaranteed through correlations using statistical quality control (SQC) method. Typical values represent the most likely parametric norm at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. Offset voltage temperature drift is determined by dividing the change in VOS at the temperature extremes by the total temperature change. This parameter is guaranteed by design and/or characterization and is not tested in production. Positive Bias Current corresponds to current flowing into the device. Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV Submit Documentation Feedback 5 LMP8640 LMP8640HV SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 www.ti.com 12V Electrical Characteristics(1) (continued) Unless otherwise specified, all limits guaranteed for at TA = 25°C, VS=V+ – V-, VSENSE= +IN-(-IN), V+ = 12V, V− = 0V, −2V < VCM < 76V, RL = 10MΩ. Boldface limits apply at the temperature extremes. Parameter Gain AV PSRR CMRR BW Fixed Gain LMP8640-F LMP8640HV-F 50 V/V Fixed Gain LMP8640-H LMP8640HV-H 100 V/V VCM = 2.1V Accuracy over temperature (5) −40°C to 125°C, VCM=2.1V + Power Supply Rejection Ratio Common Mode Rejection Ratio VCM = 2.1V, 2.7V < V < 12V, 85 LMP8640HV 2.1V < VCM < 42V LMP8640 2.1V < VCM< 42V 103 LMP8640HV 2.1V < VCM < 76V 95 -2V <VCM < 2V, 60 950 Fixed Gain LMP8640-F LMP8640HV-F (5) DC VSENSE =27 mV, CL = 30 pF ,RL= 1MΩ 450 Fixed Gain LMP8640-H LMP8640HV-H (5) DC VSENSE = 13.5 mV, CL = 30 pF ,RL= 1MΩ 230 VCM =5V, CL = 30 pF, RL = 1MΩ, LMP8640-T LMP8640HV-T VSENSE =500mVpp, LMP8640-F LMP8640HV-F VSENSE =200mVpp, LMP8640-H LMP8640HV-H VSENSE =100mVpp, 1.8 Max Output Capacitance Load 26.2 ppm/°C kHz V/µs 5 kΩ VCM = 2.1V 720 1050 1250 VCM = −2V 2300 2800 3000 Supply Current VCM = 2.1V Minimum Output Voltage % dB DC VSENSE = 67.5 mV, CL = 30 pF ,RL= 1MΩ (7) (5) 0.25 0.51 dB Fixed Gain LMP8640-T LMP8640HV-T (5) Maximum Output Voltage 6 -0.25 -0.51 Gain error Differential Mode Input Impedance (5) CLOAD Unit V/V RIN VOUT Max (2) 20 Slew Rate (7) (8) Typ (3) Fixed Gain LMP8640-T LMP8640HV-T SR IS Min (2) Test Conditions 11.85 V LMP8640-T LMP8640HV-T VCM = 2.1V 18.2 LMP8640-F LMP8640HV-F VCM = 2.1V 40 LMP8640-H LMP8640HV-H VCM = 2.1V 80 (8) µA 30 mV pF The number specified is the average of rising and falling slew rates and measured at 90% to 10%. This parameter is guaranteed by design and/or characterization and is not tested in production. Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV LMP8640 LMP8640HV www.ti.com SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 DEVICE INFORMATION Block Diagram +IN -IN RIN LMP8640 RIN + LMP8640HV + V G VOUT RG = 2*RIN V - Connection Diagram Top View VOUT V - +IN 1 2 LMP8640 LMP8640HV 3 + 6 V 5 NC 4 -IN Figure 1. 6-Pin SOT Package see package number DDC0006A Table 1. Pin Descriptions Pin Name 1 VOUT Description 2 V- 3 +IN Positive Input 4 -IN Negative Input 5 NC Not Connected 6 V+ Positive Supply Voltage Single Ended Output Negative Supply Voltage Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV Submit Documentation Feedback 7 LMP8640 LMP8640HV SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 www.ti.com Typical Performance Characteristics Unless otherwise specified: TA = 25°C, VS=V+-V-, VSENSE= +IN - (-IN), RL = 10 MΩ. Supply Curent vs. Supply Voltage 2300 2400 2100 VCM=-2V 2500 2300 2200 2100 25°C -40°C 125°C 1700 IS (PA) 125°C 1300 1100 600 500 8.0 10.6 -40°C 700 500 400 5.3 25°C 900 300 -2 -1 0 13.2 | 700 300 2.7 1500 1 2 3 VS (V) VCM (V) Figure 2. 2300 Figure 3. Supply Current vs. VCM 1700 1900 125°C IS (PA) IS (PA) 2100 1300 1700 -40°C 900 1100 900 500 700 | 700 1 2 3 125 °C 1500 1300 25°C 300 -2 -1 0 VS = 12V 2300 1900 1100 Supply Current vs. VCM 2500 VS = 5V 2100 1500 25°C -40°C 500 -2 -1 0 4 16 28 40 52 64 76 1 2 VCM (V) 4 16 28 40 52 64 76 Figure 5. CMRR vs. VCM (Gain 20V/V) CMRR vs. VCM (Gain 50V/V) 140 130 130 120 25°C 120 CMRR (dB) CMRR (dB) 3 VCM (V) Figure 4. 140 4 16 28 40 52 64 76 | | 800 VS = 2.7V 1900 VCM = 2.1V 1900 | IS (PA) 2000 Supply Current vs. VCM 125 °C 110 -40°C 100 -40°C 25°C 110 100 90 90 VS = 5V 80 -2 11 24 37 50 63 VS = 5V 76 80 -2 11 VCM (V) Submit Documentation Feedback 24 37 50 63 76 V CM (V) Figure 6. 8 125°C Figure 7. Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV LMP8640 LMP8640HV www.ti.com SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 Typical Performance Characteristics (continued) Unless otherwise specified: TA = 25°C, VS=V+-V-, VSENSE= +IN - (-IN), RL = 10 MΩ. CMRR vs. VCM (Gain 100V/V) Input Voltage Offset vs. VCM 200 140 VS = 5V -40°C 150 130 CMRR (dB) 25°C VOS (PV) 100 120 125°C 110 125 °C 50 0 25°C -50 100 -100 90 -40°C -150 V S = 5V 80 -2 11 24 37 50 63 -200 -2 76 11 24 37 0 0 -100 -200 -40°C -40°C -200 125°C -300 IB (PV) IB (PV) Ibias vs. VCM 100 -100 25°C -400 -500 -600 -600 -700 -700 -800 1 2 3 25°C -800 VS = 2.7V -900 -2 -1 0 125 °C -300 -500 VS = 5V -900 -2 -1 0 4 16 28 40 52 64 76 1 2 3 Figure 10. Figure 11. Ibias vs. VCM 100 4 16 28 40 52 64 76 VCM (V) VCM (V) Gain vs. Frequency 50 0 -100 76 Figure 9. Ibias vs. VCM -400 63 V CM (V) V CM (V) Figure 8. 100 50 VS =5V, VCM=5V GAIN 100V/V -40°C 40 125°C -300 -400 GAIN (dB) IB (PV) -200 25°C -500 30 GAIN 50V/V -600 20 GAIN 20V/V -700 -800 -900 -2 -1 0 VS = 12V 1 2 3 4 16 28 40 52 64 76 10 100 VCM (V) 1k 10k 100k 1M 10M FREQUENCY (Hz) Figure 12. Figure 13. Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV Submit Documentation Feedback 9 LMP8640 LMP8640HV SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 www.ti.com Typical Performance Characteristics (continued) 13.0 12.0 11.0 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 Output voltage vs. VSENSE Output voltage vs. VSENSE (ZOOM close to 0V) 300 VS =12V, VCM =12V V S=12V, VCM=12V 250 GAIN 100V/V 200 VOUT (mV) VOUT (V) Unless otherwise specified: TA = 25°C, VS=V+-V-, VSENSE= +IN - (-IN), RL = 10 MΩ. GAIN 100V/V GAIN 50V/V 150 100 GAIN 20V/V GAIN 50V/V 50 GAIN 20V/V 100 200 300 400 500 0 -3 600 -2 VSENSE (mV) -1 0 1 2 3 VSENSE (mV) Figure 14. Figure 15. Large Step response Small Step response VSENSE GAIN 50V/V GAIN 100V/V GAIN 50V/V GAIN 20V/V GAIN 20V/V VSENS E (10 mV/DIV) GAIN 100 VOUT (100 mV/DIV) VS ENS E (20 mV/DIV) VOUT (500 mV/DIV) V SENSE V S = 5V, VCM = 12V VS =12V, VCM =12V TIME (2 Ps/DIV) TIME (2 Ps/DIV) Figure 16. Figure 17. Settling time (fall) Settling time (rise) VS = 5V, VCM = 12V GAIN 100V/V GAIN 100 V/V V SENSE GAIN 50V/V GAIN 20V/V VSE NSE (10 mV/DIV) GAIN 20V/V VOUT (100 mV/DIV) GAIN 50V/V V SE NS E (10 mV/DIV) V OUT (100 mV/DIV) V SENSE VS = 5V, V CM = 12V TIME (400 ns /DIV) TIME (400 ns/DIV) Figure 18. 10 Submit Documentation Feedback Figure 19. Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV LMP8640 LMP8640HV www.ti.com SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 Typical Performance Characteristics (continued) Unless otherwise specified: TA = 25°C, VS=V+-V-, VSENSE= +IN - (-IN), RL = 10 MΩ. V OUT VCM VCM (5V/DIV) VCM (5V/DIV) V CM Common mode step response (fall) VOUT (50 mV/DIV) V OUT (20 mV/DIV) Common mode step response (rise) VOUT VS = 5V, GAIN 20 V/V VS = 5V, GAIN 20 V/V TIME (4 és/DIV) TIME (4 és/DIV) Figure 20. Figure 21. Load regulation (Sinking) 2.6 2.505 Load regulation (Sourcing) VS =5V, VCM=12V 2.504 2.5 GAIN 100 V/V 2.4 2.502 GAIN 50 GAIN 100V/V 2.3 V OUT (V) V OUT (V) 2.503 2.2 2.501 GAIN 50 2.1 GAIN 20V/V 2.500 2.0 GAIN 20V/V 1.9 0 2.499 1 2 3 4 VS =5V, VCM=12V 2.498 0 1 2 3 4 5 6 7 8 9 5 6 7 8 9 10 I OUT (mA) 10 I OUT (mA) Figure . Figure 22. AC PSRR vs. Frequency AC CMRR vs. Frequency 110 100 V S = 5V, V CM = 12V VS = 5V, VCM = 12V 90 CMRR (dB) PSRR (dB) 80 60 GAIN 20V/V 40 70 GAIN 100V/V 50 GAIN 50V/V GAIN 100 V/V 20 30 GAIN 20V/V GAIN 50V/V 0 10 100 1k 10k 100k 1M 10 1 FREQUENCY (Hz) Figure 23. 10 100 1k 10k 100k Frequency (Hz) Figure 24. Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV Submit Documentation Feedback 11 LMP8640 LMP8640HV SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 www.ti.com APPLICATION INFORMATION GENERAL The LMP8640 and LMP8640HV are single supply high side current sense amplifiers with a fixed gain of 20V/V, 50V/V, 100V/V and a common mode voltage range of -2V to 42V or -2V to 76V depending on the grade. THEORY OF OPERATION As seen from the picture below, the current flowing through RS develops a voltage drop equal to VSENSE across RS. The high impedance inputs of the amplifier doesn’t conduct this current and the high open loop gain of the sense amplifier forces its non-inverting input to the same voltage as the inverting input. In this way the voltage drop across RIN matches VSENSE. A current proportional to IS according to the following relation: IG = VSENSE/RIN = RS*IS/RIN , (1) flows entirely in the internal gain resistor RG developing a voltage drop equal to VRG = IG *RG = (VSENSE/RIN) *RG = ((RS*IS)/RIN)*RG (2) This voltage is buffered and showed at the output with a very low impedance allowing a very easy interface of the LMP8640 with other ICs (ADC, µC…). VOUT = 2*(RS*IS)*G, (3) where G=RG/RIN = 10V/V, 25V/V, 50V/V, according to the gain options. VSENSE Is + Rs +IN -IN RIN + LMP8640 RIN L o a d + V IG G VOUT RG = 2*RIN V - Figure 25. Current Monitor SELECTION OF THE SHUNT RESISTOR The value chosen for the shunt resistor, RS, depends on the application. It plays a big role in a current sensing system and must be chosen with care. The selection of the shunt resistor needs to take in account the smallsignal accuracy, the power dissipated and the voltage loss across the shunt itself. In applications where a small current is sensed, a bigger value of RS is selected to minimize the error in the proportional output voltage. Higher resistor value improves the SNR at the input of the current sense amplifier and hence gives an accurate output. Similarly when high current is sensed, the power losses in RS can be significant so a smaller value of RS is suggested. In this condition is required to take in account also the power rating of RS resistor. The low input offset of the LMP8640 allows the use of small sense resistors to reduce power dissipation still providing a good input dynamic range. The input dynamic range is the ratio expressed in dB between the maximum signal that can be measured and the minimum signal that can be detected, usually the input offset is the principal limiting factor. 12 Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV LMP8640 LMP8640HV www.ti.com SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 DRIVING ADC The input stage of an Analog to Digital converter can be modeled with a resistor and a capacitance versus ground. So if the voltage source doesn't have a low impedance an error in the amplitude's measurement will occur. In this case a buffer is needed to drive the ADC. The LMP8640 has an internal output buffer able to drive a capacitance load up to 30 pF or the input stage of an ADC. If required an external low pass RC filter can be added at the output of the LMP8640 to reduce the noise and the bandwidth of the current sense. IS + RS +IN -IN RIN + L o a d LMP8640 RIN + V + VA RF G ADC VOUT CF RG = 2*RIN - V Figure 26. LMP8640 to ADC Interface DESIGN EXAMPLE For example in a current monitor application is required to measure the current sunk by a load (peak current 10A) with a resolution of 10mA and 0.5% of accuracy. The 10bit analog to digital converter accepts a max input voltage of 4.1V. Moreover in order to not burn much power on the shunt resistor it needs to be less than 10mΩ. In the table below are summarized the other working condition. Working Condition Value Min Max Supply Voltage 5V 5.5V Common mode Voltage 48V 70V Temperature 0°C 70°C Signal BW 50kHz First step – LMP8640 / LMP8640HV selection The required common mode voltage of the application implies that the right choice is the LMP8640HV (High common mode voltage up tp 76V). Second step – Gain option selection We can choose between three gain option (20V/V, 50V/V, 100V/V). considering the max input voltage of the ADC (4.1V) , the max Sense voltage across the shunt resistor is evaluated according the following formula: VSENSE= (MAX Vin ADC) / Gain; hence the max VSENSE will be 205mV, 82mV, 41mV respectively. The shunt resistor are then evaluated considering the maximum monitored current : RS = (max VSENSE) / I_MAX For each gain option the max shunt resistors are the following : 20.5mΩ, 8.2mΩ, 4.1mΩ respectively. Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV Submit Documentation Feedback 13 LMP8640 LMP8640HV SNOSB28D – AUGUST 2010 – REVISED NOVEMBER 2011 www.ti.com One of the project constraints requires RS<10mΩ, it means that the 20.5mΩ will be discarded and hence the 50V/V and 100V/V gain options are still in play. Third step – Shunt resistor selection At this point an error budget calculation, considering the calibration of the Gain, Offset, CMRR, and PSRR, helps in the selection of the shunt resistor. In the table below the contribution of each error source is calculated considering the values of the Electrical Characteristics table at 5V supply. Table 2. Resolution Calculation ERROR SOURCE RS = 4.1mΩ RS = 8.1mΩ CMRR calibrated ad mid VCM range 77.9µV 77.9µV PSRR calibrated at 5V 8.9µV 8.9µV Total error (squared sum of contribution) 78µV 78µV 19.2mA 9.6mA Resolution (Total error / RS) Table 3. Accuracy Calculation ERROR SOURCE RS = 4.1mΩ RS = 8.1mΩ 182µV 182µV Nosie 216µV 216µV Gain drift 75.2µV 151µV Total error (squared sum of contribution) 293µV 320µV 0.7% 0.4% Tc Vos Accuracy 100*(Max_VSENSE / Total Error) From the tables above is clear that the 8.2mΩ shunt resistor allows the respect of the project's constraints. The power burned on the Shunt is 820mW at 10A. 14 Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: LMP8640 LMP8640HV PACKAGE OPTION ADDENDUM www.ti.com 24-Jan-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Qty Drawing Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) LMP8640HVMK-F/NOPB ACTIVE SOT DDC 6 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AD6A LMP8640HVMK-H/NOPB ACTIVE SOT DDC 6 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AF6A LMP8640HVMK-T/NOPB ACTIVE SOT DDC 6 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AB6A LMP8640HVMKE-F/NOPB ACTIVE SOT DDC 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AD6A LMP8640HVMKE-H/NOPB ACTIVE SOT DDC 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AF6A LMP8640HVMKE-T/NOPB ACTIVE SOT DDC 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AB6A LMP8640HVMKX-F/NOPB ACTIVE SOT DDC 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AD6A LMP8640HVMKX-H/NOPB ACTIVE SOT DDC 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AF6A LMP8640HVMKX-T/NOPB ACTIVE SOT DDC 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AB6A LMP8640MK-F/NOPB ACTIVE SOT DDC 6 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AC6A LMP8640MK-H/NOPB ACTIVE SOT DDC 6 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AE6A LMP8640MK-T/NOPB ACTIVE SOT DDC 6 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AA6A LMP8640MKE-F/NOPB ACTIVE SOT DDC 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AC6A LMP8640MKE-H/NOPB ACTIVE SOT DDC 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AE6A LMP8640MKE-T/NOPB ACTIVE SOT DDC 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AA6A LMP8640MKX-F/NOPB ACTIVE SOT DDC 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AC6A LMP8640MKX-H/NOPB ACTIVE SOT DDC 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 AE6A Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 24-Jan-2013 Status (1) LMP8640MKX-T/NOPB ACTIVE Package Type Package Pins Package Qty Drawing SOT DDC 6 3000 Eco Plan Lead/Ball Finish (2) Green (RoHS & no Sb/Br) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) CU NIPDAU Level-1-260C-UNLIM (4) -40 to 125 AA6A (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Only one of markings shown within the brackets will appear on the physical device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 Samples PACKAGE MATERIALS INFORMATION www.ti.com 16-Nov-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LMP8640HVMK-F/NOPB SOT DDC 6 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640HVMK-H/NOPB SOT DDC 6 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640HVMK-T/NOPB SOT DDC 6 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640HVMKE-F/NOPB SOT DDC 6 250 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640HVMKE-H/NOP B SOT DDC 6 250 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640HVMKE-T/NOPB SOT DDC 6 250 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640HVMKX-F/NOPB SOT DDC 6 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640HVMKX-H/NOP B SOT DDC 6 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640HVMKX-T/NOPB SOT DDC 6 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640MK-F/NOPB SOT DDC 6 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640MK-H/NOPB SOT DDC 6 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640MK-T/NOPB SOT DDC 6 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640MKE-F/NOPB SOT DDC 6 250 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640MKE-H/NOPB SOT DDC 6 250 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640MKE-T/NOPB SOT DDC 6 250 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640MKX-F/NOPB SOT DDC 6 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMP8640MKX-H/NOPB SOT DDC 6 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 16-Nov-2012 Device LMP8640MKX-T/NOPB Package Package Pins Type Drawing SOT DDC 6 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 3000 178.0 8.4 3.2 B0 (mm) K0 (mm) P1 (mm) 3.2 1.4 4.0 W Pin1 (mm) Quadrant 8.0 Q3 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMP8640HVMK-F/NOPB SOT DDC 6 1000 203.0 190.0 41.0 LMP8640HVMK-H/NOPB SOT DDC 6 1000 203.0 190.0 41.0 LMP8640HVMK-T/NOPB SOT DDC 6 1000 203.0 190.0 41.0 LMP8640HVMKE-F/NOPB SOT DDC 6 250 203.0 190.0 41.0 LMP8640HVMKE-H/NOPB SOT DDC 6 250 203.0 190.0 41.0 LMP8640HVMKE-T/NOPB SOT DDC 6 250 203.0 190.0 41.0 LMP8640HVMKX-F/NOPB SOT DDC 6 3000 206.0 191.0 90.0 LMP8640HVMKX-H/NOPB SOT DDC 6 3000 206.0 191.0 90.0 LMP8640HVMKX-T/NOPB SOT DDC 6 3000 206.0 191.0 90.0 LMP8640MK-F/NOPB SOT DDC 6 1000 203.0 190.0 41.0 LMP8640MK-H/NOPB SOT DDC 6 1000 203.0 190.0 41.0 LMP8640MK-T/NOPB SOT DDC 6 1000 203.0 190.0 41.0 LMP8640MKE-F/NOPB SOT DDC 6 250 203.0 190.0 41.0 LMP8640MKE-H/NOPB SOT DDC 6 250 203.0 190.0 41.0 LMP8640MKE-T/NOPB SOT DDC 6 250 203.0 190.0 41.0 LMP8640MKX-F/NOPB SOT DDC 6 3000 206.0 191.0 90.0 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 16-Nov-2012 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMP8640MKX-H/NOPB SOT DDC 6 3000 206.0 191.0 90.0 LMP8640MKX-T/NOPB SOT DDC 6 3000 206.0 191.0 90.0 Pack Materials-Page 3 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: LMP8640HV-HEVAL/NOPB LMP8640HV-FEVAL/NOPB LMP8640HV-TEVAL/NOPB