MUR3040PT, RURH1540CC, MUR3060PT, RURH1560CC Data Sheet January 2000 File Number 2774.4 15A, 400V - 600V Ultrafast Dual Diodes Features MUR3040PT, RURH1540CC, MUR3060PT, and RURH1560CC are ultrafast dual diodes (trr < 55ns) with soft recovery characteristics. They have a low forward voltage drop and are of planar, silicon nitride passivated, ion-implanted, epitaxial construction. • Ultrafast with Soft Recovery . . . . . . . . . . . . . . . . . . . <55ns These devices are intended for use as energy steering/clamping diodes and rectifiers in a variety of switching power supplies and other power switching applications. Their low stored charge and ultrafast recovery with soft recovery characteristics minimizes ringing and electrical noise in many power switching circuits thus reducing power loss in the switching transistor. • Planar Construction • Operating Temperature. . . . . . . . . . . . . . . . . . . . . . .175oC • Reverse Voltage Up to . . . . . . . . . . . . . . . . . . . . . . . .600V • Avalanche Energy Rated Applications • Switching Power Supply • Power Switching Circuits • General Purpose Formerly developmental type TA09905. Packaging Ordering Information PART NUMBER JEDEC TO-218AC PACKAGE BRAND MUR3040PT TO-218AC MUR3040PT RURH1540CC TO-218AC RURH1540C MUR3060PT TO-218AC MUR3060PT RURH1560CC TO-218AC RURH1560C ANODE 1 CATHODE ANODE 2 CATHODE (FLANGE) NOTE: When ordering, use the entire part number. Symbol K A2 A1 (Per Leg) TC = 25oC, Unless Otherwise Specified MUR3040PT RURH1540CC Peak Repetitive Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRRM 400 Absolute Maximum Ratings Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRWM DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VR Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IF(AV) (TC = 145oC) Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFRM (Square Wave 20kHz) Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFSM (Halfwave 1 Phase 60Hz) Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Avalanche Energy (See Figures 7 and 8) . . . . . . . . . . . . . . . . . . . . . . . . . . .EAVL Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . TSTG, TJ 1 MUR3060PT RURH1560CC UNITS 400 400 15 600 600 600 15 V V V A 42 30 A 200 200 A 100 20 -55 to 175 100 20 -55 to 175 W mJ oC 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 2000 MUR3040PT, RURH1540CC, MUR3060PT, RURH1560CC (Per Leg) TC = 25oC, Unless Otherwise Specified Electrical Specifications MUR3040PT, RURH1540CC MUR3060PT, RURH1560CC MIN TYP MAX MIN TYP MAX UNITS IF = 15A - - 1.25 - - 1.5 V IF = 15A, TC = 150oC - - 1.12 - - 1.2 V VR = 400V - - 100 - - - µA VR = 600V - - - - - 100 µA VR = 400V, TC = 150oC VR = 600V, TC = 150oC - - 500 - - - µA - - - - - 500 µA IF = 1A, dIF/dt = 100A/µs - - 55 - - 55 ns IF = 15A, dIF/dt = 100A/µs - - 60 - - 60 ns ta IF = 15A, dIF/dt = 100A/µs - 30 - - 30 - ns tb IF = 15A, dIF/dt = 100A/µs - 17 - - 20 - ns 1.5 oC/W SYMBOL TEST CONDITION VF IR trr RθJC - - 1.5 - - DEFINITIONS VF = Instantaneous forward voltage (pw = 300µs, D = 2%). IR = Instantaneous reverse current. trr = Reverse recovery time at dIF/dt = 100A/µs (See Figure 6), summation of ta + tb. ta = Time to reach peak reverse current at dIF/dt = 100A/µs (See Figure 6). tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 6). RθJC = Thermal resistance junction to case. pw = pulse width. D = duty cycle. Typical Performance Curves 500 80 IR, REVERSE CURRENT (µA) IF, FORWARD CURRENT (A) 100 175oC 10 100oC 25oC 175oC 10 1.0 100oC 0.1 0.01 25oC 1 0.001 0 0.5 1.0 1.5 VF, FORWARD VOLTAGE (V) FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE 2 2.0 0 100 200 300 400 500 VR, REVERSE VOLTAGE (V) FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE 600 MUR3040PT, RURH1540CC, MUR3060PT, RURH1560CC Typical Performance Curves IF(AV) , AVERAGE FORWARD CURRENT (A) 60 50 t, TIME (ns) 40 trr 30 ta 20 tb 10 0 10 1 20 16 14 DC 12 SQ. WAVE 10 8 6 4 2 0 120 130 140 150 160 170 180 TC, CASE TEMPERATURE (oC) IF, FORWARD CURRENT (A) FIGURE 3. trr, ta AND tb CURVES vs FORWARD CURRENT FIGURE 4. CURRENT DERATING CURVE Test Circuits and Waveforms VGE AMPLITUDE AND RG CONTROL dIF/dt t1 AND t2 CONTROL IF L DUT CURRENT SENSE RG IF + VGE - IGBT t1 VDD dIF trr dt ta tb 0 0.25 IRM t2 IRM FIGURE 5. trr TEST CIRCUIT FIGURE 6. trr WAVEFORMS AND DEFINITIONS I = 1A L = 40mH R < 0.1Ω EAVL = 1/2LI2 [VR(AVL) /(VR(AVL) - VDD)] Q1 = IGBT (BVCES > DUT VR(AVL)) VAVL L CURRENT SENSE R + VDD IL IL I V Q1 VDD DUT t0 FIGURE 7. AVALANCHE ENERGY TEST CIRCUIT t1 t2 t FIGURE 8. AVALANCHE CURRENT AND VOLTAGE WAVEFORMS All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site www.intersil.com 3