Power Inductors <SMD Type: CDEP **ME Series> Type: CDEP63ME ◆ Product Description ・7.25×6.8mm Max. (L×W), 3.0mm Max. height. ・Inductance range: 0.33μH～10μH. ・Rated Current Range: 2.1A～13.5A. ◆ Feature ・Super high current inductors. ・Iron powder core used, Flat wire used. ・Ideally used in Server, Desktop and Notebook CPU power supply. ・RoHS Compliance. ◆ Dimensions (mm) 7.25 Max. 4.0 1.3 2.8 6.8 Max. 3.0 Max. ◆ Schematics (Bottom) 3.4 ◆ Land Pattern (mm) S F 3.7 7.4 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 Power Inductors <SMD Type: CDEP **ME Series> Type: CDEP63ME ◆ Specification D.C.R.(mΩ) Max.(Typ.) (20℃) Saturation Current （A）※3 Temperature Rise current (A) ※4 4.0 (3.2) 26.0 (32.5) 13.5 (15.4) 0.47μH±20% 5.9 (4.7) 28.8 (36.0) 11.6 (13.2) R68 0.68μH±20% 9.2 (7.3) 23.2 (29.0) 9.0 (10.0) CDEP63MENP-R82M□ R82 0.82μH±20% 9.2 (7.3) 16.9 (21.2) 9.0 (10.0) CDEP63MENP-1R0M□ 1R0 1.0μH±20% 14.0 (11.2) 21.2 (26.5) 7.2 (8.2) CDEP63MENP-1R5M□ 1R5 1.5μH±20% 20.0 (16.0) 14.2 (17.8) 5.2 (6.2) CDEP63MENP-2R2M□ 2R2 2.2μH±20% 26.0 (20.8) 10.2 (12.8) 4.3 (4.8) CDEP63MENP-3R3M□ 3R3 3.3μH±20% 53.4 (42.7) 10.6 (13.3) 3.2 (3.6) CDEP63MENP-4R7M□ 4R7 4.7μH±20% 59.3 (47.4) 7.4 (9.2) 2.9 (3.3) CDEP63MENP-6R8M□ 6R8 6.8μH±20% 85.5 (68.4) 6.1 (7.6) 2.5 (2.9) CDEP63MENP-8R2M□ 8R2 8.2μH±20% 90.5 (72.4) 5.8 (7.2) 2.4 (2.7) CDEP63MENP-100M□ 100 10μH±20% 113.8 (91.0) 4.6 (5.8) 2.1 (2.3) Part Name ※ Stamp Inductance ※1 CDEP63MENP-R33M□ R33 0.33μH±20% CDEP63MENP-R47M□ R47 CDEP63MENP-R68M□ ※ Description of part name CDEP63MENP-R47M□ B Box C Carrier Tape ※1 Measured at 100KHz, 0.25Vrms. ※2 ( ) Typical value. ※3 This indicates the value of current when the inductance is 20% lower than its initial value at D.C. superposition. ※4 The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2