Miscellaneous Accessories D38999/28 Jam Nut Glenair Connector Designator H D38999/28-11 F Basic Part No. MIL-DTL-38999 Series III & IV, EN3645 Material and Finish: C = Aluminum, Anodize F = Aluminum, Electroless Nickel K = Corrosion Resistant Steel Passivate W = Aluminum, Cadmium Olive Drab over Electroless Nickel Dash No. B C Safety Wire Holes (Min. 3 Holes Equally Spaced) A Thread TABLE I Dash No. 1 2 3 4 5 6 7 8 9 10 11 12 Shell Size Series Series III IV 9 -11 -13 11 15 13 -15 17 --17 19 -21 19 23 21 25 23 -25 C A Thread Class 2B M17 X 1 - 6H* M20 X 1 - 6H* M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M32 X 1 - 6H M34 X 1 - 6H M35 X 1 - 6H M38 X 1 - 6H M41 X 1 - 6H M44 X 1 - 6H M47 X 1 - 6H B Hex Max .945 (24.00) 1.063 (27.00) 1.260 (32.00) 1.417 (36.00) 1.614 (41.00) 1.457 (37.00) 1.614 (41.00) 1.614 (41.00) 1.811 (46.00) 1.969 (50.00) 2.017 (51.23) 2.165 (55.00) +.018 -.000 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 (.45) (.00) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) * Modified Minor Diameter 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 68-8