FJNS4202R FJNS4202R Switching Application (Bias Resistor Built In) • Switching circuit, Inverter, Interface circuit, Driver Circuit • Built in bias Resistor (R1=10KΩ, R2=10KΩ) • Complement to FJNS3202R TO-92S 1 1.Emitter 2. Collector 3. Base PNP Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol VCBO Parameter Collector-Base Voltage Value -50 Units V VCEO VEBO Collector-Emitter Voltage -50 V Emitter-Base Voltage -10 V IC Collector Current -100 mA PC Collector Power Dissipation 300 mW TJ Junction Temperature 150 °C TSTG Storage Temperature -55 ~ 150 °C Equivalent Circuit C R1 B R2 E Electrical Characteristics Ta=25°C unless otherwise noted Symbol BVCBO Parameter Collector-Base Breakdown Voltage Test Condition IC= -10µA, IE=0 Min. -50 BVCEO Collector-Emitter Breakdown Voltage IC= -100µA, IB=0 -50 ICBO Collector Cut-off Current VCB= -40V, IE=0 Typ. Max. Units V -0.1 µA V hFE DC Current Gain VCE= -5V, IC= -5mA VCE(sat) Collector-Emitter Saturation Voltage IC= -10mA, IB= -0.5mA 30 fT Current Gain Bandwidth Product VCE= -10V, IC=-5mA 200 MHz Cob Output Capacitance VCB= -10V, IE=0 f=1.0MHz 5.5 pF -0.3 VI(off) Input Off Voltage VCE= -5V, IC= -100µA VI(on) Input On Voltage VCE= -0.3V, IC= -10mA R1 Input Resistor 7 R1/R2 Resistor Ratio 0.9 ©2002 Fairchild Semiconductor Corporation -0.5 V V -3 V 10 13 KΩ 1 1.1 Rev. A, July 2002 -100 VCE = - 5V VCE = - 0.3V R1 = 10 K R1 = 10 K R2 = 10 K R2 = 10 K VI(on)[V], INPUT VOLTAGE hFE, DC CURRENT GAIN 1000 100 -10 -100 -1 -0.1 -0.1 10 -1 -10 -1000 -1 IC[mA], COLLECTOR CURRENT 350 VCE = - 5V R1 = 10 K R2 = 10 K 300 PC[mW], POWER DISSIPATION IC [µA], COLLECTOR CURRENT Figure 2. Input On Voltage -100 -10 -0.0 -100 IC[mA], COLLECTOR CURRENT Figure 1. DC current Gain -1000 -10 250 200 150 100 50 0 -0.4 -0.8 -1.2 -1.6 -2.0 -2.4 0 25 50 75 100 125 150 175 o VI(off)[V], INPUT OFF VOLTAGE Figure 3. Input Off Voltage ©2002 Fairchild Semiconductor Corporation Ta[ C], AMBIENT TEMPERATURE Figure 4. Power Derating Rev. A, July 2002 FJNS4202R Typical Characteristics FJNS4202R Package Dimensions TO-92S 4.00 ±0.20 (1.10) 3.70 ±0.20 2.31 ±0.20 14.47 ±0.30 0.66 MAX. 0.49 ±0.10 1.27TYP [1.27±0.20] 1.27TYP [1.27±0.20] +0.10 0.35 –0.05 2.86 ±0.20 0.77 ±0.10 3.72 ±0.20 Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. A, July 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet series™ FAST® FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SLIENT SWITCHER® SMART START™ VCX™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2002 Fairchild Semiconductor Corporation Rev. H7