BVLED BVM-SFRGBC05 Rgb flexstrip light Datasheet

Bright View Electronics
RGB FLEXSTRIP LIGHT
BVM-SFRGBC05
■ DESCRIPTION
- Strip light is made of high brightness SMD LEDs
mounted on rigid printed circuit (PCB). White lights with
red, green and blue LED integrated are available
for various applications.
- Bright View provides full color spectrum controller,
please refer to the specifications of BVM-FSCC .
- Bright View also provides connectors
■ FEATURES
-
Number of SMD LEDs : 250 pcs of ultra bright RGB SMD LED
Product size (LxWXH) : 6300mm x 12.9mm x 2.7mm (with adhesive-tape back)
Shortest unit is 150mm with 6 LEDs.
Easy installation with connector
Continuous length flexible LED light strips
Low power consumption and high optical intensity
Runs on DC 24 volt power supply
Lead (Pb) free, and RoHS compliant
■ APPLICATIONS
-
Decorative & Entertainment Lighting
Tube Light Source & LED Strip Light
Architectural Lighting
General Lighting
Date:2008/10/13
Page :1 of 5
Version : A
Bright View Electronics
RGB FLEXSTRIP LIGHT
BVM-SFRGBC05
Unit : mm
■ PRODUCT DIMENSIONS
SOLDER PAD
SOLDER PAD
■ PART NUMBERING SYSTEM
B V M - S F RGB C05
Driver Code
Color Code
Product Code
LED Module
Date:2008/10/13
Page :2 of 5
Version : A
Bright View Electronics
RGB FLEXSTRIP LIGHT
BVM-SFRGBC05
■ ABSOLUTE MAXIMUM RATINGS AT Ta = 25 ℃
PARAMETER
Max. Operating Voltage
Electrostatic Discharge (Contact Model)
Power Dissipation/Unit
Power Dissipation/Reel
Operating Temperature Range
Storage Temperature Range
Max.
Unit
25
±2000
1.625
68.25
-30 ~ +50
-30 ~ +85
V
V
W
W
℃
℃
*The operating temperature measured position is on the back of the FPC.
■ TYPICAL ELECTRICAL / OPTICAL CHARACTERISTICS AT LED If = 20mA Ta = 25℃
SYMBOL
V
λp
λd
2θ1/2
I
I
Φ
Φ
PARAMETER
BVM-SF25FC2S
Light Color
Operating Voltage (length<= 3150mm)
Peak Emission Wavelength
Dominant Wavelength
LED Viewing Angle
Operating Current/Unit (typ.)
Operating Current/Reel
Luminous Flux/Unit
Luminous Flux/Reel
Date:2008/10/13
Red
635
625
120
21
0.91
8.0
640
Page :3 of 5
Green
24
518
525
120
21
0.91
10.0
800
Unit
Blue
465
470
120
21
0.91
6.0
480
V
nm
nm
deg.
mA
A
lm
lm
Version : A
Bright View Electronics
RGB FLEXSTRIP LIGHT
■ PACKING
BVM-SFRGBC05
Unit : cm
PA RT NO .:
LO T NO .:
G RADE:
Q 't y
pcs
QA
EL EC T R OST AT IC S EN SITIVE DEVIC ES
DO N OT OPEN OR H AND LE EX CEPT
AT A ST AT IC -F R EE WORKST ATION
23
Bright View
Electronics Co.,Ltd.
PART NO.:
LOT NO.:
GRADE:
Q'ty
QA
Pb-Free / RoHS Compliant
ELECTROSTATIC SENSITIVE DEVICES
DO NOT OPEN OR HANDLE EXCEPT
AT A STATIC-FREE W ORKSTATION
22
Anti-electrostatic bag
24
Carton : 20 Reels
39
26
RE
Date:2008/10/13
ITEM NO.
DEVICE:
Q'TY
N. W.:
G. W.:
PCS.
KGS.
KGS.
Y
CARTON
Dimension(cm): 39 x 24 x 26
Page :4 of 5
Version : A
Bright View Electronics
RGB FLEXSTRIP LIGHT
BVM-SFRGBC05
■ CAUTIONS
1. Over voltage
A. Drive the product over the specified voltage rating (25VDC) per unit or per strip will damage
the product.
B. The product should not be used in reverse polarity.
C. It is recommended to use a power supply with overload (over-voltage, short circuit and
overheat) protection.
2. Hand soldering
A. It is recommended to use a tip temperature of 280 OC for less than 3 seconds (one times)
with a soldering iron capacity of 30W, if hand soldering of the connecting wire is required.
B. Be careful of the contaminations of hand soldering.
3. Storage & Handling
A. Open the anti-electrostatic bag only a short time before use.
B. LED is encapsulated with elastic resin and will be damaged with a external force
applied on the top surface of the LED.
C. The product should be storage in an environment with the relative humidity less than
90% RH (@30 degree C or less).
D. During installation, excess mechanical stress will damage the product. The minimum
bending radius of curvature is 5000mm. The maximum twist angle is 1 degree.
E. The product is not waterproof. Excess moisture may also damage the product.
Date:2008/10/13
Page :5 of 5
Version : A
Similar pages