Formosa FR304 Axial leaded fast recovery rectifier Datasheet

Formosa MS
Axial Leaded Fast Recovery Rectifiers
FR301 THRU FR307
List
List................................................................................................. 1
Package outline............................................................................... 2
Features.......................................................................................... 2
Mechanical data............................................................................... 2
Maximum ratings .............................................................................. 2
Rating and characteristic curves........................................................ 3
Pinning information........................................................................... 4
Marking........................................................................................... 4
Taping & bulk specifications for AXIAL devices.................................... 4
Suggested thermal profiles for soldering processes............................. 5
High reliability test capabilities........................................................... 6
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 1
Document ID
Issued Date
Revised Date
DS-222213
2008/02/10
2010/03/11
Revision
C
Page.
6
Formosa MS
Axial Leaded Fast Recovery Rectifiers
FR301 THRU FR307
3.0A Axial Leaded Fast Recovery
Rectifiers - 50V-1000V
Package outline
Features
DO-201AD
• Axial lead type devices for through hole design.
• High current capability.
• Fast switching for high efficiency.
• High surge capability.
• Silicon rubber coating chip junction.
• Lead-free parts meet RoHS requirments.
• Suffix "-H" indicates Halogen-free parts, ex. FR301-H.
1.0(25.4)
MIN.
.220(5.6)
.197(5.0)
DIA.
.375(9.5)
.285(7.2)
Mechanical data
• Epoxy : UL94-V0 rated flame retardant
• Case : Molded plastic, DO-201AD
• Lead : Axial leads, solderable per MIL-STD-202,
.048(1.2)
DIA.
Method 208 guranteed
• Polarity: Color band denotes cathode end
• Mounting Position : Any
• Weight : Approximated 1.10 gram
Dimensions in inches and (millimeters)
Maximum ratings and Electrical Characteristics (AT
PARAMETER
T A=25 oC unless otherwise noted)
CONDITIONS
Forward rectified current
See Fig.2
Forward surge current
8.3ms single half sine-wave (JEDEC methode)
V R = V RRM T J = 25 OC
Reverse current
f=1MHz and applied 4V DC reverse voltage
Storage temperature
UNIT
IO
3.0
A
I FSM
200
A
V RMS*2
(V)
*3
VR
(V)
FR301
50
35
50
FR302
100
70
100
FR303
200
140
200
FR304
400
280
400
FR305
600
420
600
FR306
800
560
800
FR307
1000
700
1000
*4
VF
(V)
MIN.
TYP.
5.0
Operating
temperature
T J, ( OC)
*5
t rr
(ns)
150
CJ
T STG
*1
V RRM
(V)
SYMBOLS
MAX.
Symbol
IR
V R = V RRM T J = 100 OC
Diode junction capacitance
1.0(25.4)
MIN.
.052(1.3)
pF
60
+175
-65
μA
O
C
*1 Repetitive peak reverse voltage
*2 RMS voltage
150
1.30
*3 Continuous reverse voltage
-55 to +125
250
*4 Maximum forward voltage@I F=3.0A
*5 Maximum Reverse recovery time, note 1
500
Note 1. Reverse recovery time test condition, I F =0.5A, I R =1.0A, I RR =0.25A
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 2
Document ID
Issued Date
Revised Date
DS-222213
2008/02/10
2010/03/11
Revision
C
Page.
6
Rating and characteristic curves (FR301 THRU FR307)
FIG.1-TYPICAL FORWARD
FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE
AVERAGE FORWARD CURRENT,(A)
CHARACTERISTICS
10
3.0
1.0
3.0
2.5
2.0
Single Phase
1.5
Half Wave 60Hz
Resistive Or Inductive Load
1.0
0.375"(9.5mm) Lead Length
0.5
0
0
20
40
60
TJ=25 C
80
100
120
140
160
180
200
AMBIENT TEMPERATURE,(°C)
Pulse Width 300us
1% Duty Cycle
0.1
.01
.6
.8
1.0
1.2
1.4
1.6
1.8
2.0
FORWARD VOLTAGE,(V)
FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE
RECOVERY TIME CHARACTERISTICS
50W
NONINDUCTIVE
10W
NONINDUCTIVE
( )
(+)
D.U.T.
25Vdc
(approx.)
PEAK FORWARD SURGE CURRENT,(A)
FIG.4-MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
PULSE
GENERATOR
(NOTE 2)
( )
250
200
150
Sine Wave
100
JEDEC method
50
1
5
(+)
1W
NONINDUCTIVE
2. Rise Time= 10ns max., Source Impedance= 50 ohms.
|
|
|
|
|
|
|
|
0
-0.25A
100
FIG.5-TYPICAL JUNCTION CAPACITANCE
NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF.
+0.5A
50
10
NUMBER OF CYCLES AT 60Hz
OSCILLISCOPE
(NOTE 1)
trr
8.3ms Single Half
TJ=25 C
0
140
JUNCTION CAPACITANCE,(pF)
INSTANTANEOUS FORWARD CURRENT,(A)
50
120
100
80
60
40
20
0
-1.0A
1cm
.01
SET TIME BASE FOR
.05
.1
.5
1
5
10
50
100
Revision
Page.
REVERSE VOLTAGE,(V)
50 / 10ns / cm
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 3
Document ID
Issued Date
Revised Date
DS-222213
2008/02/10
2010/03/11
C
6
Formosa MS
Axial Leaded Fast Recovery Rectifiers
FR301 THRU FR307
Pinning information
Pin
Pin1
Pin2
Simplified outline
cathode
anode
Symbol
1
2
1
2
Marking
Type number
Marking code
FR301
FR302
FR303
FR304
FR305
FR306
FR307
FR301
FR302
FR303
FR304
FR305
FR306
FR307
Taping & bulk specifications for AXIAL devices
52.4mm
17mm DIA.
55mm Max.
A
17mm DIA.
72mm DIA.
71mm Max.
355mm
OFF Center
both sids
1.0mm
Max OFF
Alignment
1.2mm
6.3mm
REEL PACKING
DEVICE
Q'TY 1
COMPONENT
CARTON
Q'TY 2
APPROX.
CASE
(PCS / REEL)
SPACING
SIZE
(PCS / CARTON)
CROSS
"A" in FIG. A
(m/m)
10 mm
360 * 340 * 370
TYPE
DO-201AD
1,200
WEIGHT(kg)
4,800
9.1
AMMO PACKING
DEVICE
Q'TY 1
INNER
CARTON
Q'TY 2
APPROX.
CASE
(PCS / BOX)
BOX SIZE
SIZE
(PCS / CARTON)
CROSS
(m/m)
(m/m)
TYPE
DO-201AD
1,200
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
260 * 83 * 160
440 * 270 * 340
Page 4
WEIGHT(kg)
12,000
17.0
Document ID
Issued Date
Revised Date
DS-222213
2008/02/10
2010/03/11
Revision
C
Page.
6
Formosa MS
Axial Leaded Fast Recovery Rectifiers
FR301 THRU FR307
BULK PACKING
DEVICE
Q'TY 1
INNER
CARTON
Q'TY 2
APPROX.
CASE
(PCS / BOX)
BOX SIZE
SIZE
(PCS / CARTON)
CROSS
TYPE
(m/m)
DO-201AD
500
WEIGHT(kg)
(m/m)
305 * 73 * 40
347 * 320 * 271
12,000
16.4
Suggested thermal profiles for soldering processes
1.Lead free temperature profile wave-soldering
280
Peak soldering temperature not
to exceed 260ºC
260
240
220
Temperature(°C)
200
180
160
140
120
Peak
Max well
time 5 Max
100
80
Cool Down
Max gradient-4ºC/s
Suggested gradient - 2ºC/s or
less
60
40
20
Preheat
Max gradient 2ºC/s
0
0
20
40
60
80
100 120 140 160 180 200 220 240
Time(Sec)
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 5
Document ID
Issued Date
Revised Date
DS-222213
2008/02/10
2010/03/11
Revision
C
Page.
6
Formosa MS
Axial Leaded Fast Recovery Rectifiers
FR301 THRU FR307
High reliability test capabilities
Item Test
Conditions
Reference
o
1. Solder Resistance
at 260±5 C for 10±2sec.
immerse body into solder 1/16"±1/32"
MIL-STD-750D
METHOD-2031
2. Solderability
at 245±5 oC for 5 sec.
MIL-STD-202F
METHOD-208
3. Pull Test
2.0kg in axial lead direction for 10 sec.
I F=I O
4. Bend Lead
5. High Temperature Reverse Bias
6. Forward Operation Life
7. Intermittent Operation Life
8. Pressure Cooker
MIL-STD-202F
METHOD-211A
2.0kg weight applied to each lead bending
arc 90 o±5 o for 3 times
MIL-STD-202F
METHOD-211A
V R=80% rate at T J=125 oC for 168 hrs.
MIL-STD-750D
METHOD-1038
Rated average rectifier current at T A=25 oC for 500hrs.
MIL-STD-750D
METHOD-1027
T A = 25 OC, I F = I O
On state: power on for 5 min.
off state: power off for 5 min,
on and off for 500 cycles.
MIL-STD-750D
METHOD-1036
JESD22-A102
15P SIG at T A=121 oC for 4 hrs.
MIL-STD-750D
METHOD-1051
9. Temperature Cycling
-55 oC to +125 oC dwelled for 30 min.
and transferred for 5min. total 10 cycles.
10. Forward Surge
8.3ms single half sine-wave one surge.
MIL-STD-750D
METHOD-4066-2
11. Humidity
at T A=85 oC, RH=85% for 1000hrs.
MIL-STD-750D
METHOD-1021
12. High Temperature Storage Life
at 175 oC for 1000 hrs.
MIL-STD-750D
METHOD-1031
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 6
Document ID
Issued Date
Revised Date
DS-222213
2008/02/10
2010/03/11
Revision
C
Page.
6
Similar pages