MBR30HxxCT, MBRF30HxxCT, MBRB30HxxCT ITO-220AB (MBRF30HxxCT) 0.188 (4.77) 0.172 (4.36) 0.405 (10.27) 0.383 (9.72) 0.110 (2.80) 0.100 (2.54) TO-220AB (MBR30HxxCT) 0.131 (3.39) DIA. 0.122 (3.08) 0.140 (3.56) DIA. 0.130 (3.30) 0.185 (4.70) 0.415 (10.54) MAX. 0.175 (4.44) 0.154 (3.91) 0.370 (9.40) 0.360 (9.14) 0.055 (1.39) 0.045 (1.14) 0.148 (3.74) 0.676 (17.2) 0.646 (16.4) 0.600 (15.5) 0.580 (14.5) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.410 (10.41) 0.390 (9.91) 1 PIN 2 3 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 3 2 1 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 0.635 (16.13) 0.625 (15.87) 0.350 (8.89) 0.330 (8.38) PIN PIN 1 0.110 (2.79) 0.100 (2.54) PIN 1 PIN 2 PIN 3 CASE 0.560 (14.22) 0.530 (13.46) 0.104 (2.65) 0.096 (2.45) PIN 2 PIN 3 0.037 (0.94) 0.027 (0.69) 0.105 (2.67) 0.095 (2.41) 0.022 (0.55) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.105 (2.67) 0.095 (2.41) 0.110 (2.80) 0.100 (2.54) 0.060 (1.52) 0.035 (0.90) 0.028 (0.70) 0.022 (0.56) 0.014 (0.36) TO-263AB (MBRB30HxxCT) 0.205 (5.20) 0.195 (4.95) 0.411 (10.45) 0.190 (4.83) 0.380 (9.65) 0.160 (4.06) Mounting Pad Layout TO-263AB K 0.42 (10.66) 0.055 (1.40) 0.360 (9.14) 0.047 (1.19) 0.320 (8.13) 0.33 (8.38) 0.055 (1.40) 0.045 (1.14) 0.245 (6.22) MIN Dimensions in inches and (millimeters) 0.624 (15.85) 1 K 2 0.591 (15.00) 0-0.01 (0-0.254) 0.63 (17.02) 0.110 (2.79) 0.090 (2.29) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.08 (2.032) 0.095 (2.41) 0.24 (6.096) 0.12 (3.05) 0.021 (0.53) PIN 1 0.014 (0.36) PIN 2 0.205 (5.20) K - HEATSINK 0.140 (3.56) 0.110 (2.79) 0.195 (4.95) Features Mechanical Data Case: JEDEC TO-220AB, ITO-220AB & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250 °C/10 seconds, 0.25" (6.35 mm) from case Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 oz., 2.24 g • Plastic package has Underwriters Laboratory Flammability Classification 94 V-0 • Dual rectifier construction, positive center tap • Metal silicon junction, majority carrier conduction • Low forward voltage drop, low power loss and high efficiency • Guardring for overvoltage protection • For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications • Rated for reverse surge and ESD • 175 °C maximum operation junction temperature www.kersemi.com 1 MBR30HxxCT, MBRF30HxxCT, MBRB30HxxCT Maximum Ratings (TC = 25 °C unless otherwise noted) Parameter Symbol MBR30H35CT MBR30H45CT MBR30H50CT MBR30H60CT Unit Maximum repetitive peak reverse voltage VRRM 35 45 50 60 V Working peak reverse voltage VRWM 35 45 50 60 V Maximum DC blocking voltage VDC 35 45 50 60 V Max. average forward rectified current (see fig. 1) Total device Per leg IF(AV) 30 15 A Peak repetitive forward current at TC = 150 °C (rated VR, 20 KHz sq. wave) IFRM 30 A Non-repetitive avalanche energy per leg at 25 °C, IAS = 4 A, L = 10 mH EAS 80 mJ Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) per leg IFSM 150 A Peak repetitive reverse surge current per leg at tp = 2.0 µs, 1 KHZ IRRM 1.0 0.5 A Peak non-repetitive reverse energy (8/20 µs waveform) ERSM 25 20 mJ Electrostatic discharge capacitor voltage Human body model: C = 100 pF, R = 1.5 kΩ Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1.0 second, RH ≤ 30% VC 25 kV dv/dt 10,000 V/µs TJ –65 to +175 °C TSTG –65 to +175 °C VISOL 4500(1) 3500(2) 1500(3) V Electrical Characteristics (TC = 25 °C unless otherwise noted) Parameter Maximum instantaneous forward voltage per leg (4) Symbol MBR30H35CT, MBR30H45CT MBR30H50CT, MBR30H60CT at at at at IF = IF = IF = IF = 15 15 30 30 A A A A Maximum instantaneous reverse current at rated DC blocking voltage per leg(4) Typ Max Typ Max Unit TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ =125 °C VF – 0.49 – 0.62 0.62 0.56 0.73 0.67 – 0.55 – 0.68 0.68 0.59 0.83 0.71 V TJ = 25 °C TJ =125 °C IR – 5.0 80 15 – 4.0 60 15 µA mA Thermal Characteristics (TC = 25 °C unless otherwise noted) Parameter Symbol MBR MBRF MBRB Unit Thermal resistance from junction to case per leg RθJC 1.5 4.5 1.5 °C/W Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset (2) Clip mounting (on case), where leads do overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”) (4) Pulse test: 300 µs pulse width, 1% duty cycle Ordering Information Product Case Package Code Package Option MBR30H35CT – MBR30H60CT TO-220AB 45 Anti-Static tube, 50/tube, 2K/carton MBRF30H35CT – MBRF30H60CT ITO-220AB 45 Anti-Static tube, 50/tube, 2K/carton MBRB30H35CT – MBRB30H60CT TO-263AB 31 45 81 13” reel, 800/reel, 4.8K/carton Anti-Static tube, 50/tube, 2K/carton Anti-Static 13” reel, 800/reel, 4.8K/carton www.kersemi.com 2 MBR30HxxCT, MBRF30HxxCT, MBRB30HxxCT Fig. 2 – Maximum Non-Repetitive Peak Forward Surge Current Per Leg Fig. 1 – Forward Current Derating Curve 150 MBR, MBRB 30 MBRF 20 10 Peak Forward Surge Current (A) Average Forward Current (A) 40 125 100 75 50 25 0 0 25 75 50 100 125 150 175 10 100 Number of Cycles at 60 HZ Fig. 3 – Typical Instantaneous Forward Characteristics Per Leg Fig. 4 – Typical Reverse Characteristics Per Leg 100 TJ = 150°C 10 TJ = 25°C 1 TJ = 125°C 0.1 100 10 TJ = 150°C 1 TJ = 125°C 0.1 0.01 MBR30H35CT -- MBR30H45CT MBR30H50CT -- MBR30H60CT 0.001 MBR30H35CT -- MBR30H45CT MBR30H50CT -- MBR30H60CT 0.01 0.1 0 10000 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 20 40 60 80 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Fig. 5 – Typical Junction Capacitance Per Leg Fig. 6 – Typical Transient Thermal Impedance Per Leg 100 10 TJ = 25°C f = 1.0 MHZ Vsig = 50mVp-p 1000 MBR30H35CT -- MBR30H45CT MBR30H50CT -- MBR30H60CT 100 0.1 TJ = 25°C 0.0001 1.0 Transeint Thermal Impedance (°C/W) Instantaneous Forward Current (A) 1 Case Temperature (°C) Instantaneous Reverse Leakage Current (mA) 0 pF - Junction Capacitance TJ = TJ max. 8.3ms Single Half Sine-Wave (JEDEC Method) 1 10 Reverse Voltage (V) 100 1 0.1 0.01 0.1 1 10 t, Pulse Duration (sec.) www.kersemi.com 3