MBR1635 THRU MBR16100 16.0 AMPS. Schottky Barrier Rectifiers Voltage Range 35 to 100 Volts Current 16.0 Amperes TO-220A Features .185(4.70) .175(4.44) Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260 oC/10 seconds,0.25”(6.35mm)from case .412(10.5) MAX .113(2.87) .103(2.62) .27(6.86) .23(5.84) .594(15.1) .587(14.9) PIN1 2 .16(4.06) .14(3.56) .11(2.79) .10(2.54) .56(14.22) .53(13.46) Mechanical Data .055(1.40) .045(1.14) DIA .154(3.91) .148(3.74) .037(0.94) .027(0.68) Cases: JEDEC TO-220A molded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams .025(0.64) .014(0.35) .205(5.20) .195(4.95) PIN 1 PIN 2 CASE Case Positive Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBR MBR MBR MBR MBR MBR Units Type Number 1635 1645 1650 1660 1690 16100 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Tc=125OC Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) at Tc=125oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at: (Note 2) IF=16A, T C=25oC IF=16A, T C=125oC Maximum Instantaneous Reverse Current @ Tc =25℃at Rated DC Blocking Voltage (Note 2) @ Tc=125℃ V RRM V RMS V DC 35 24 35 45 31 45 50 35 50 60 42 60 90 63 90 100 70 100 V V V I(AV) 16 A IFRM 32.0 A IFSM 150 250 0.5 A IRRM 1.0 A VF 0.63 0.57 0.75 0.65 0.85 0.75 V IR 0.2 40.0 1.0 50.0 10,000 3.0 500 -65 to +150 -65 to +175 0.2 - mA mA V/uS ℃/W pF ℃ ℃ dV/dt Voltage Rate of Change (Rated VR) R θJC Maximum Typical Thermal Resistance(Note 3) Cj Typical Junction Capacitance TJ Operating Junction Temperature Range T STG Storage Temperature Range Notes: 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg with heatsink size of 2” x 3” x 0.25” AL-place - 154 - RATINGS AND CHARACTERISTIC CURVES (MBR1635 THRU MBR16100) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 350 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 20 16 12 8 4 250 200 50 100 o CASE TEMPERATURE. ( C) MBR 100 1635 -MBR 50 1 150 1690 -MBR 1610 0 1660 10 100 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 40 50 Tj=125 0C 10 10 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) MBR 150 0 0 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 300 Pulse Width=300 s 1% Duty Cycle 1 Tj=25 0C 0.1 MBR1635-MBR1645 MBR1650-MBR1660 MBR1690-MBR16100 Tj=125 0C 1 Tj=75 0C 0.1 0.01 Tj=25 0C MBR1635-MBR1645 MBR1650-MBR16100 0.01 0 0.1 0.2 0.3 0.4 0.001 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0 FIG.5- TYPICAL JUNCTION CAPACITANCE 60 80 100 120 140 TRANSIENT THERMAL IMPEDANCE. ( OC/W) 100 Tj=25 0C f=1.0MHz Vsig=50mVp-p JUNCTION CAPACITANCE.(pF) 40 FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS 6,000 1,000 100 0.1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) MBR1635-MBR1645 MBR1650-MBR1660 MBR1690-MBR16100 1 10 100 REVERSE VOLTAGE. (V) 10.0 1 0.1 0.01 0.1 1 T, PULSE DURATION. (sec) - 155 - 10 100