Fixed Inductors (Chip Inductors) 4. High Power Type PF, PE, PC, PA, PB, LC, LA Discontinued ：Wirewound Chip Inductor. ELJPC, ELJPA, ELJPB, ELJLC, ELJLA ■ Features ● Low DCR and large current capability, suitable for power circuitry. ● Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) ● Unique Ceramic Core/Laser-cut technology (PF, PE type) ● Capable of being Re-flow or flow soldered. ● Wide line-up from 1005 to 4532 case sizes. ● Good for mounting. ● RoHS compliant ■ Recommended Applications ● AV equipment, Wireless communication equipment and various types of general electronic equipment. ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 & - + 1 " 3 , ' 11 Packaging Design No. Product code Chip Inductors Shape Inductance PF 1005 (0402) 1N5 Inductance tolerance 1.5 nH D ±0.3 nH PE 1608 (0603) 10N 10 nH J ±5 % PC 2520 (1008) R22 220 nH K ±10 % LC 2520 (1008) 3R3 3.3 μH M ±20 % PA 3225 (1210) 470 47 μH LA 3225 (1210) 561 560 μH PB 4532 (1812) F Taping Size : mm (inch) ■Storage Conditions ● Package : Normal temperature (–5 to 35 °C), normal humidity (85 %RH max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. ● Operating Temperature : –40 to +85 °C (PF, PE) –20 to +85 °C (PC, PA, PB, LC, LA) ■Storage Period ● Solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation of tin-plated terminals. Even if storage conditions are within specified limits, solderability may be reduced with the passage of time. Therefore, please control the storage conditions and try to use the product within 6 months of receipt. ■Packaging Methods, Soldering Conditions and Safety Precautions Please see Data Files. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2012 1 Fixed Inductors (Chip Inductors) ■ PC Type 2520 (1008)/PC□3 Type 2520 (1008) ● Dimensions in mm (not to scale) Discontinued ：Wirewound Chip Inductor. ELJPC ● Recommended Land Pattern in mm (not to scale) 1.2 to 1.6 1.2±0.1 2.0±0.2 Marking 2.5+0.3 –0.2 1.4 to 1.5 1.6±0.2 3.5 to 4.0 ■ Standard Packing Quantity ● 2000 pcs./Reel 0.4±0.2 ■ Standard Parts Part No. (μH) ELJPC1R0MF 1.0 ELJPC1R5MF 1.5 ELJPC2R2MF 2.2 ELJPC3R3MF 3.3 ELJPC4R7MF 4.7 ELJPC6R8KF 6.8 Inductance Tolerance Test Freq. (%) (MHz) Q min. Test Freq. (MHz) SRF ✽1 (MHz) min. RDC ✽2 (Ω) max. DC Current (mA) max. 95 0.45 475 85 0.55 435 65 0.65 390 55 0.85 340 10 M : ±20 % 7.96 7.96 8 8.5 43 1.2 285 44 1.3 170 ELJPC100KF 10 32 2.2 210 ELJPC120KF 12 25 2.7 195 ELJPC150KF 15 21 3.2 175 ELJPC220KF 22 18 4.0 160 ELJPC330KF 33 16 6.5 120 Self Resonant Frequency (MHz) min. DC Resistance Rated Current ✽1 (mA) max. Saturation Rated Current ✽2 (mA) max. K : ±10 % 2.52 20 2.52 ✽1 : Self Resonant Frequency ✽2 : DC Resistance ■ Standard Parts(PC□3 Type) Inductance Part No. (μH) Tolerance (%) Test Freq. (MHz) (Ω) ELJPC1R0MF3 1.0 180 0.12 ±30 % 890 400 ELJPC2R2MF3 2.2 95 0.19 ±30 % 700 330 ELJPC3R3MF3 3.3 75 0.22 ±30 % 650 260 ELJPC4R7MF3 4.7 65 0.25 ±30 % 610 220 ELJPC100MF3 10 43 0.58 ±30 % 400 140 ELJPC220MF3 22 21 1.22 ±30 % 275 100 ±20 % 1 ✽1 Rated current is defined by maximum temperature rise of 40 Celsius. ✽2 Saturation Rated Current is defined by 30% change of inductance. -dL/L<-30% Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2012 2 Fixed Inductors (Chip Inductors) ■ PA Type 3225 (1210)/PA□2 Type 3225 (1210) Discontinued ：Wirewound Chip Inductor. ELJPA ● Dimensions in mm (not to scale) ● Recommended Land Pattern in mm (not to scale) 1.9 to 2.4 1.9±0.1 2.5±0.2 Marking 1.6 to 2.0 3.2±0.3 2.2±0.2 4.0 to 4.6 ■ Standard Packing Quantity ● 2000 pcs./Reel 0.6±0.2 ■ Standard Parts(PA Type) Part No. ELJPA1R0MF ELJPA1R5MF ELJPA2R2MF ELJPA3R3MF ELJPA4R7MF ELJPA6R8MF ELJPA100KF ELJPA120KF ELJPA150KF ELJPA180KF ELJPA220KF ELJPA270KF ELJPA330KF ELJPA390KF ELJPA470KF ELJPA560KF ELJPA680KF ELJPA820KF ELJPA101KF ELJPA121KF ELJPA151KF ELJPA181KF ELJPA221KF ELJPA271KF ELJPA331KF (μH) 1.0 1.5 2.2 3.3 4.7 6.8 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 Inductance Tolerance Test Freq. (%) (MHz) M : ±20 % Q min. Test Freq. (MHz) 7.96 7 7.96 2.52 15 2.52 0.796 20 0.796 SRF ✽1 (MHz) min. RDC ✽2 (Ω) max. DC Current (mA) max. 150 110 80 58 46 38 23 21 18 17 15 13 12 11 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.0 3.5 3.0 0.15 0.18 0.23 0.28 0.34 0.42 0.50 0.60 0.74 0.90 1.15 1.45 1.65 1.90 2.25 3.30 3.70 4.20 5.00 7.00 8.00 9.50 11.0 14.5 16.0 600 550 500 400 350 300 240 230 220 205 185 165 155 145 135 110 105 100 90 75 70 65 60 55 50 K : ±10 % ✽1 : Self Resonant Frequency ✽2 : DC Resistance ■ Standard Parts(PA□2 Type) Part No. ELJPA1R0MF2 ELJPA2R2MF2 ELJPA3R3MF2 ELJPA4R7MF2 ELJPA6R8MF2 ELJPA100KF2 ELJPA220KF2 ELJPA330KF2 ELJPA470KF2 ELJPA680KF2 ELJPA101KF2 ELJPA221KF2 (μH) 1.0 2.2 3.3 4.7 6.8 10 22 33 47 68 100 220 Inductance Tolerance (%) Test Freq. (MHz) M : ±20 % 1 K : ±10 % Self Resonant Frequency (MHz) min. 130 70 42 35 28 23 15 12 9.5 7.5 6.5 4.0 DC Resistance (Ω) 0.085 ±30 % 0.17 ±30 % 0.19 ±30 % 0.23 ±30 % 0.28 ±30 % 0.35 ±20 % 0.66 ±20 % 1.05 ±20 % 1.75 ±20 % 3.20 ±20 % 3.90 ±20 % 8.70 ±20 % Rated Current ✽1 (mA) max. 1150 800 750 700 620 590 420 330 260 190 175 115 Saturation Rated Current ✽2 (mA) max. 1200 800 690 580 530 400 290 240 200 160 130 85 ✽1 Rated current is defined by maximum temperature rise of 40 Celsius. ✽2 Saturation Rated Current is defined by 30% change of inductance. -dL/L<-30% Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2012 3 Fixed Inductors (Chip Inductors) Discontinued ：Wirewound Chip Inductor. ELJPB ■ PB Type 4532 (1812) ● Dimensions in mm (not to scale) ● Recommended Land Pattern in mm (not to scale) 2.0 to 3.0 2.0±0.2 3.2±0.2 Marking 4.5±0.3 2.4 to 2.6 3.2±0.2 5.5 to 6.0 ■ Standard Packing Quantity 0.6±0.2 ● 500 pcs./Reel ■ Standard Parts Part No. (μH) Inductance Tolerance Test Freq. (%) (MHz) Q min. Test Freq. (MHz) SRF ✽1 (MHz) min. RDC ✽2 (Ω) max. DC Current (mA) max. ELJPB100KF 10 19 0.65 360 ELJPB120KF 12 17 0.70 340 ELJPB150KF 15 15 0.80 320 ELJPB180KF 18 14 0.90 310 ELJPB220KF 22 13 1.0 300 ELJPB270KF 27 11 1.2 270 ELJPB330KF 33 10 1.4 250 ELJPB390KF 39 9.5 1.6 230 ELJPB470KF 47 8.5 1.9 210 ELJPB560KF 56 8 2.2 190 ELJPB680KF 68 7 2.6 170 ELJPB820KF 82 6.5 3.5 160 ELJPB101KF 100 6 4.0 150 ELJPB121KF 120 ELJPB151KF 150 ELJPB181KF 180 ELJPB221KF 220 2.52 10 2.52 K : ±10 % 0.796 20 0.796 5.5 4.5 130 5 6.5 120 4.5 7.5 110 4 9.0 90 ✽1 : Self Resonant Frequency ✽2 : DC Resistance Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2012 4 Fixed Inductors (Chip Inductors) ■ LC Type 2520 (1008) Discontinued ：Wirewound Chip Inductor. ELJLC ● Dimensions in mm (not to scale) ● Recommended Land Pattern in mm (not to scale) 1.2 to 1.6 1.2±0.1 2.0±0.2 Marking 2.5+0.3 –0.2 1.4 to 1.5 1.6±0.2 3.5 to 4.0 ■ Standard Packing Quantity ● 2000 pcs./Reel 0.4±0.2 ■ Standard Parts Part No. ELJLC2R2MF ELJLC3R3MF ELJLC4R7MF ELJLC100KF Inductance Tolerance (%) (μH) 2.2 3.3 4.7 10 M : ±20 % Test Freq. (MHz) 1 K : ±10 % DC Resistance (Ω) 0.33 ±30 % 0.57 ±30 % 0.75 ±30 % 1.60 ±30 % Rated Current ✽1 (mA) max. 520 400 350 240 Saturation Rated Current (mA) max. 1050 820 700 470 ✽2 ✽1 Rated current is defined by maximum temperature rise of 40 Celsius. ✽2 Saturation Rated Current is defined by 30% change of inductance. -dL/L<-30% ■ Performance Characteristics (Reference) Inductance vs DC Current Inductance (μH) 100 ) 10 ) ) ) 1 1 10 100 1000 10000 Idc (mA) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2012 5 Fixed Inductors (Chip Inductors) ■ LA Type 3225 (1210) Discontinued ：Wirewound Chip Inductor. ELJLA ● Dimensions in mm (not to scale) ● Recommended Land Pattern in mm (not to scale) 1.9 to 2.4 1.9±0.1 2.5±0.2 Marking 1.6 to 2.0 3.2±0.3 2.2±0.2 4.0 to 4.6 ■ Standard Packing Quantity ● 2000 pcs./Reel 0.6±0.2 ■ Standard Parts Part No. ELJLA2R2KF ELJLA3R3KF ELJLA4R7KF ELJLA6R8KF ELJLA100KF ELJLA220KF ELJLA470KF ELJLA680KF ELJLA101KF Inductance Tolerance (%) (μH) 2.2 3.3 4.7 6.8 10 22 47 68 100 ±10 % Test Freq. (MHz) 1 DC Resistance (Ω) 0.20 ±30 % 0.24 ±30 % 0.35 ±30 % 0.55 ±30 % 0.71 ±20 % 1.90 ±20 % 4.30 ±20 % 5.50 ±20 % 9.50 ±20 % Rated Current ✽1 (mA) max. 740 670 560 460 410 250 165 145 110 Saturation Rated Current (mA) max. 1400 1200 900 800 600 420 300 260 200 ✽2 ✽1 Rated current is defined by maximum temperature rise of 40 Celsius. ✽2 Saturation Rated Current is defined by 30% change of inductance. -dL/L<-30% ■ Performance Characteristics (Reference) Inductance vs DC Current Inductance (μH) 1000 100 ) ) ) 10 ) ) ) 1 1 10 100 1000 10000 Idc (mA) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2012 6 Fixed Inductors (Chip Inductors) ■ Packaging Methods (Taping) ● Punched Carrier Tape Dimensions in mm (not to scale) t1 ● Type □F fD0 E P0 B F W RF, QF, PF Part A P1 P2 t2 RF, QF, PF Tape running direction ● Embossed Carrier Tape Dimensions in mm (not to scale) A B W E F P1 0.71 1.21 8.0 1.75 3.5 2.0 P2 P0 0D0 2.0 4.0 01.5 t1 0.7 max. t2 1.0 max. E F ● Type □E, Type ND, Type □C A t1 E f D0 F 1.0 1.8 8.0 1.75 3.5 4.0 ND 1.45 2.25 8.0 1.75 3.5 4.0 NC, FC, PC, LC, SC 2.40 2.90 8.0 1.75 3.5 4.0 P2 P0 0D0 0D1 t1 t2 2.0 4.0 01.5 00.6 (0.27) B f D1 P1 P2 P0 Tape running direction t2 F B Chip component P1 f D0 t1 P2 P0 Tape running direction 4.0 01.5 01.0 (0.25) 1.55 4.0 01.5 01.1 (0.25) 1.85 B W E F P1 3.60 8.0 1.75 3.5 4.0 P2 P0 0D0 t1 t2 2.0 4.0 01.5 (0.25) 2.40 NA, FA, PA, LA, SA, EA, DA ● Type □B P2 P0 B W F A t2 2.0 2.0 E t2 ND NC, FC, PC, LC, SC A NA, FA, PA, LA, 2.80 SA, EA, DA W A Chip component 1.2 ● Type □A E f D0 t1 P1 RE, QE, PE RE, QE, PE Chip component W W A B Tape running direction P1 A B W E F P1 FB, PB 3.60 4.90 12.0 1.75 5.5 8.0 P2 P0 0D0 t1 t2 FB, PB 2.0 4.0 01.5 (0.30) 3.50 ● Taping Reel Dimensions in mm (not to scale) Parts Types E C A B RF, QF, PF, RE, QE, PE, ND, 180 NC, FC, PC, LC, SC, NA, FA, PA, LA, SA, EA, DA D FB, PB W 180 B C D E W 60 13 21 2 9 60 13 21 2 13 A ■ Standard Packing Quantity/Reel Quantity Types RF, QF, PF RE, QE, PE, ND NC, FC, PC, LC, SC NA, FA, PA, LA, SA, EA, DA FB, PB Quantity 10000 3000 2000 2000 500 ✽ Under conditions of high temperature and humidity deterioration of the taping and packaging may be accelerated. Please carefully control storage conditions and use the product within 6 months of receipt. pcs. pcs. pcs. pcs. pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2012 7 Fixed Inductors (Chip Inductors) Soldering Conditions Temperature (°C) ■ Reflow soldering conditions T3 T2 T1 t2 t1 0 Time ● Pb free solder recommended temperature profile Preheat Soldering Peak Temperature T1 [°C] t1 [s] T2 [°C] t2 [s] T3 T3 Limit Time of Reflow □F 150 to 180 60 to 120 230 °C 40 max. 250 °C, 10 s 260 °C, 10 s 2 times max. □E 150 to 180 60 to 120 230 °C 40 max. 250 °C, 10 s 260 °C, 10 s 2 times max. □D 150 to 180 60 to 120 230 °C 40 max. 245 °C, 10 s 250 °C, 10 s 2 times max. □C 150 to 180 60 to 120 230 °C 40 max. 245 °C, 10 s 250 °C, 10 s 2 times max. □A 150 to 180 60 to 120 230 °C 40 max. 245 °C, 10 s 250 °C, 10 s 2 times max. □B 150 to 180 60 to 120 230 °C 40 max. 245 °C, 10 s 250 °C, 10 s 2 times max. Type ■ Flow soldering conditions Preheat: 130 to 150 °C, 60 to 180 s, Soldering: 260 °C, 5 s max. ■ Notes ● Solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation of tin-plated terminals. Even if storage conditions are within specified limits, solderability may be reduced with the passage of time. Therefore, please control the storage conditions and try to use the product within 6 months of receipt. ● In case the product has been stored for a period longer than 6 months, use the product only after confirmation of its solderability. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2012 8 Fixed Inductors (Chip Inductors) Safety Precautions (Common precautions for Chip Inductors) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (au to mo bile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault Precautions for use 1. Operation range and environments 1 These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric applianc es, office equipment, information and com mu nication equipment) 2 These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. • In liquid, such as water, oil, chemicals, or organic solvent • In direct sunlight, outdoors, or in dust • In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 • In an environment where these products cause dew condensation 2. Handling 1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can change the inductance value. 2 Do not apply strong mechanical shocks by either dropping or collision with other parts. Excessive schock can damage the part. 3. Land pattern design 1 Please refer to the recommended land pattern for each type shown on the datasheet. 2 Avoid placing the chip inductor on any metal pattern except the recommended land pattern because a drop of Q and mutual conductance may occur. 3 In case of flow soldering, venting of soldering flux gases should be made for high density assemblies to get a good solder connection. 4 In case of reflow soldering, consider the layout because taller components close to chip inductor tend to block thermal conduction. 4. Mounting 1 In general, magnetic and electric characteristics of ferrite cores can be changed by applying excessively strong force. Placement force should not exceed 20 N. 2 Do not bend or twist the PWB after mounting the part. 5. Cleaning 1 Do not use acid or alkali agents. Some cleaning solvents may damage the part. Confirm by testing the reliability in advance of mass production. 2 If Ultrasonic cleaning is used, please confirm the reliability in advance. It is possible that combined resonance of component and PWB and cavitation can cause an abnormal vibration mode to exist causing damage. 6. Caution about applying excessive current The rated current is defined as the smaller value of either the current value when the inductance drops 10 % down from the initial point or the current value when the average temperature of coil inside rises 20 °C up from the initial point. Do not operate product over the specific max. current. <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2012 9 Fixed Inductors (Chip Inductors) Chip Inductors Type: Discontinued ：Wirewound Chip Inductor. □D, □C, □A, □B □F, □E, □D, □C, □A, □B □F □E □D □C □A □B (Size 1005) (Size 1608) (Size 2012) (Size 2520) (Size 3225) (Size 4532) Ceramic Core/Laser-Cut and wire wound type chip inductors for automatic and high-density mounting Wide variation product line-up correspond to various needs ■ Recommended Applications ● Cellular phones, wireless communication equipment (W-LAN, Bluetooth), various modules, HIC, TV, VTR, PC & peripherals, DVD, DSC, STB. ■ Inductors · Selection Guide Technology Case Usage Size : mm (inch) Non wound Wire wound Discontinued Size 1005 (0402) Size 1608 (0603) Size 2012 (0805) Size 2520 (1008) Size 3225 (1210) Size 4532 (1812) ELJRF ELJRE ELJND ELJNC ELJNA 1.0–100 nH 1.0–220 nH 10–1000 nH 10–820 nH 47–8200 nH ELJQF ELJQE 1.0–39 nH 2.2–56 nH ELJFC ELJFA ELJFB 0.22–100 µH 0.22–220 µH 0.22–1000 µH High Freq. Use High Freq. High-Q General Use ELJPF ELJPE ELJPC/PC□3 ELJLC ELJPA/PA□2 ELJLA ELJPB 2.2–10 nH 2.2–22 nH 1.0–33 µH 1.0–330 µH 10–220 µH ELJSC ELJSA 27–100 µH 10–270 µH High Power Magnetically Shielded ELJEA Low DC Resistance 1.0–330 µH ELJDA/ELJFA Signal Processing Use (Low Distortion Type) 39–100 µH Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2012 10