ES3A THRU ES3D SURFACE MOUNT ULTRAFAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage - 50 to 200 Volts Forward Current - 3.0 Amperes FEATURES DO-214AB 0.126 (3.20) 0.114 (2.90) 0.245 (6.22) 0.220 (5.59) 0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ For surface mount applications ♦ Low profile package ♦ Built-in strain relief ♦ Ideal for automated placement ♦ Easy pick and place ♦ Superfast recovery time for high efficiency ♦ Glass passivated chip junction ♦ High temperature soldering: 250°C/10 seconds at terminals 0.103 (2.62) 0.079 (2.06) MECHANICAL DATA 0.060 (1.52) 0.008 (0.203) MAX. 0.030 (0.76) 0.320 (8.13) 0.305 (7.75) Dimensions in inches and (millimeters) Case: JEDEC DO-214AB molded plastic body over passivated chip Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.007 ounces, 0.21 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS Device marking code ES3A ES3B ES3C ES3D UNITS EA EB EC ED 100 150 200 Volts Maximum repetitive peak reverse voltage VRRM 50 Maximum RMS voltage VRMS 35 70 105 140 Volts VDC 50 100 150 200 Volts Maximum DC blocking voltage Maximum average forward rectified current at TL=100°C I(AV) 3.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TL=100°C IFSM 100.0 Amps VF 0.90 Volts IR 10.0 500.0 µA trr 20.0 ns TJ=25°C TJ=100°C trr 30.0 50.0 ns TJ=25°C TJ=100°C Qrr 15.0 35.0 nC CJ 45.0 pF RΘJA RΘJL 47.0 12.0 °C/W TJ, TSTG -55 to +150 °C Maximum instantaneous forward voltage at 3.0A Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=100°C Maximum reverse recovery time (NOTE 1) Maximum reverse recovery time (NOTE 2) Maximum stored charge (NOTE 2) Typical junction capacitance (NOTE 3) Typical thermal resistance (NOTE 4) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) trr and Qrr measured at: VR=30V, di/dt=50A/µs, IF=3.0A, and Irr=10% IR (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (4) Units mounted on P.C.B. with 0.31 x 0.31” (8.0 x 8.0mm) copper pad areas 4/98 RATING AND CHARACTERISTIC CURVES ES3A THRU ES3D FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE 150 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 3.0 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 2.0 1.0 P.C.B. MOUNTED on 0.31 x 0.31” (8.0 x 8.0mm) COPPER PADS 0 80 90 100 110 120 130 140 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) at TL=100°C 125 100 75 50 25 0 1 150 10 LEAD TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS 100 1,000 TJ=25°C INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 NUMBER OF CYCLES AT 60 HZ 10 PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 100 TJ=100°C 10 TJ=75°C 1 TJ=25°C 0.1 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.01 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 105 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 90 75 60 45 30 15 0 0.1 1 REVERSE VOLTAGE, VOLTS 100 100