ACP-4000 Quiet 4U Rackmount Chassis with Visual & Audible Alarm Notification Features Supports either an ATX motherboard or PICMG backplane with up to 15 slots Shock-resistant disk drive bay design holds up to three 5.25" and one 3.5" disk drives LED indicators and alarm notification for system fault detection Low noise system fans Built-in Intelligent System Module enables whole system fan control and remote manageability Specifications Drive Bay External 1 3 2 (12 cm / 85 CFM each) Yes 2 1 Power, HDD, temperature, fan, and power voltage status Backplane version: One 9-pin D-Sub opening Rear Panel Motherboard version: Five 9-pin D-Sub & one 25-pin D-Sub openings CPU/System fan speed , CPU/System temperature , motherboard voltage (Only selected Advantech MBs/CPU cards with WISE-PaaS/RMM installed can fully enable these functions, check with Advantech local rep. for detailed information.) Operating Non-Operating Temperature 0 ~ 40 °C (32 ~ 104 °F) -20 ~ 60 °C (-4 ~ 140 °F) Humidity 10 ~ 85% @ 40 °C, non-condensing 10 ~ 95% @ 40 °C, non-condensing Vibration (5 ~ 500 Hz) 1 Grms 2G Shock 10 G (with 11 ms duration, half sine wave) Dimensions (W x H x D) 482 x 177 x 479 mm (19" x 7" x 18.9") Weight 15.2 kg (33.5 lb) 3.5" 5.25" Fan Air Filter USB 2.0 PS/2 LED Indicators Cooling Front I/O Interface Miscellaneous Intelligent System Module Remote Monitoring Environment Physical Characteristics Front View System reset button Alarm reset button Three 5.25" drive bays (Devices not included) USB Two 85 CFM cooling fans One 3.5" drive bay PS/2 keyboard connector Power switch Industrial Chassis All product specifications are subject to change without notice. Last updated: 18-Aug-2017 ACP-4000 Dimensions 468.0 [18.43] 482.1 [18.98] 426.0 [16.77] Unit: mm [inch] 101.6 [4.00] 523.1 [20.59] 478.6 [18.84] 172.7 [6.80] 86.4 [3.40] 177.0 [6.97] 92.0 [3.62] ACP-4000MB-50RCE RPS8-500ATX-XE Wattage Switch type 300W 400W 500W ATX ATX ATX ATX 300W 400W 500W 500W (1+1) redundant ATX ATX ATX ATX ATX Power Supply Options 80 Plus Grade Wattage RPS8-350ATX-XE Gold 350W RPS8-500ATX-XE Bronze 500W PS-300ATX-DC48E N/A 300W 98.0 [3.86] Part Number 1700006915 1700006917 IPC-DT-5230E Type Input 1+1 Redundant 1+1 Redundant Single AC 100 ~ 240 V (full range) AC 100 ~ 240 V (full range) DC -48 V Description ATX 24P/20P + 4P + 8P 60cm cable (connecting from power supply to alarm board) Two Mini DIN (connect to MB) / 6P (connect to front I/O board) PS2 KB/Mouse cable Mobile rack for converting dual 5.25" drive bays to three 3.5" SATA HDD trays * If users use AIMB-763 or 3rd party motherboard, they need to purchase 1700006915 or 1700006916 for the front voltage LEDs to function normally. And they also need to purchase 1700006917 to make front PS/2 function normally. * If users use ASMB-822, they need to purchase 1700006915 for the front voltage LEDs to function normally. Spare Parts Part Number 2130006147S000 2130004803S000 (For detailed power supply specs, please refer to Chapter 13) Part Number 92.0 [3.62] Optional Accessories Ordering Information Part Number Power Supply Backplane Version ACP-4000BP-00CE NA ACP-4000BP-30CE PS8-300ATX-ZBE ACP-4000BP-40CE PS8-400ATX-ZE ACP-4000BP-50CE PS8-500ATX-ZE Mother board Version ACP-4000MB-00CE NA ACP-4000MB-30CE PS8-300ATX-ZBE ACP-4000MB-40CE PS8-400ATX-ZE ACP-4000MB-50CE PS8-500ATX-ZE 92.0 [3.62] Description Door filter 97.6 x 36.6 x 5 mm Fan filter 115 x 195 x 5 mm Online Download www.advantech.com/products