HMC-C039 v00.1206 DIVIDE-BY-5 PRESCALER MODULE, 0.5 - 8.0 GHz Features Ultra Low SSB Phase Noise: -150 dBc/Hz Wide Bandwidth FREQUENCY DIVIDERS 3 Output Power: -1 dBm Single DC Supply: +5V @ 80mA Typical Applications Prescaler for 0.5 to 18 GHz PLL Applications: • Point-to-Point / Multi-Point Radios • VSAT Radios RoHS Compliant Hermetically Sealed Module Field Replaceable SMA Connectors -55 to +85 °C Operating Temperature General Description • Fiber Optic • Test Equipment • Military & Space Functional Diagram The HMC-C039 is a low noise Divide-by-8 Static Divider utilizing InGaP GaAs HBT technology packaged in a miniature, hermetic module with replacable SMA connectors. This device operates from 0.5 to 8GHz input frequency from a single +5.0V DC supply. The low additive SSB phase noise of -155 dBc/Hz at 100 kHz offset helps the user maintain excellent system noise performance. Electrical Specifications, TA = +25° C, 50 Ohm System, Vdc= +5V Parameter Conditions Min. Typ. 8 9 0.5 GHz Fin = 0.5 to 7 GHz -15 -20 +15 dBm Fin = 7 to 8 GHz -15 -20 +10 dBm Output Power Fin = 0.5 to 8 GHz -4 Reverse Leakage Fin = 0.5 to 8 GHz 58 dB Pin = 0 dBm, Fin = 4.8 GHz -155 dBc/Hz Pin = 0 dBm, Fout = 882 MHz 100 ps 80 mA Maximum Input Frequency Minimum Input Frequency Input Power Range SSB Phase Noise (100 kHz offset) Output Transition Time Supply Current (Idc) 3 - 16 Sine Wave Input Max. Units GHz -1 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com dBm HMC-C039 v00.1206 DIVIDE-BY-5 PRESCALER MODULE, 0.5 - 8.0 GHz Input Sensitivity vs. Temperature 20 15 15 10 10 5 0 Recommended Operating Window -5 -10 -15 5 -5 -10 -15 -20 -20 -25 -25 -30 -30 0 1 2 3 4 5 6 7 8 0 9 1 2 INPUT FREQUENCY (GHz) 0 -20 SSB PHASE NOISE (dBc/Hz) OUTPUT POWER (dBm) 0 -2 -3 -4 +25C +85C -55C -6 4 5 6 7 8 9 SSB Phase Noise Performance, Pin= 0 dBm, T= 25 °C -1 -5 3 INPUT FREQUENCY (GHz) Output Power vs. Temperature -40 -60 -80 -100 -7 -120 -8 -140 -9 -10 0 1 2 3 4 5 6 7 8 9 -160 2 10 3 4 10 INPUT FREQUENCY (GHz) 5 10 6 10 7 10 10 OFFSET FREQUENCY (Hz) Output Harmonic Content, Pin= 0 dBm, T= 25 °C Reverse Leakage, Pin= 0 dBm, T= 25 °C 0 0 -5 -10 -10 -15 OUTPUT LEVEL (dBm) OUTPUT LEVEL (dBm) 3 Min Pin +25C Max Pin +25C Min Pin +85C Max Pin +85C Min Pin -55C Max Pin -55C 0 FREQUENCY DIVIDERS 20 INPUT POWER (dBm) INPUT POWER (dBm) Input Sensitivity Window, T= 25 °C -20 -25 -30 -35 -40 -45 Feedthru 2nd Harmonic 3rd Harmonic -50 -55 -20 -30 -40 -50 -60 -70 -60 -80 0 1 2 3 4 5 6 INPUT FREQUENCY (GHz) 7 8 9 0 1 2 3 4 5 6 7 8 9 INPUT FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 3 - 17 HMC-C039 v00.1206 DIVIDE-BY-5 PRESCALER MODULE, 0.5 - 8.0 GHz FREQUENCY DIVIDERS 3 AMPLITUDE (mV) Output Voltage Waveform, Pin= 0 dBm, Fout= 882 MHz, T= 25 °C Absolute Maximum Ratings 200 Supply Voltage (Vdc) +5.5V 150 RF Input (Vdc = +5V) +13 dBm 100 Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C 50 0 -50 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS -100 -150 -200 23 23.2 23.4 23.6 23.8 24 24.2 24.4 24.6 24.8 25 Typical Supply Current vs. Vdc TIME (nS) Vdc Idc (mA) 4.75 74 5.0 80 5.25 86 Note: Divider will operate over full voltage range shown above Pin Description 3 - 18 Pin Number Function Description 1 RFIN & RF Ground RF input connector, SMA female, field replaceable. RF Input is AC coupled. 2 RFOUT & RF Ground RF output connector, SMA female,field replaceable. Divided output is AC coupled. 3 Vdc Supply voltage 5V ± 0.25V. 4 GND Power supply ground. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C039 v00.1206 DIVIDE-BY-5 PRESCALER MODULE, 0.5 - 8.0 GHz Outline Drawing FREQUENCY DIVIDERS 3 Typical Package Weight Package 10.2 gms Spacer N/A +/- 1 gms Tolerance NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™ 2. BRACKET MATERIAL: ALUMINUM 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602 - 5CCSF OR EQUIVALENT. 7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80 HARDWARE WITH DESIRED MOUNTING SCREWS. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 3 - 19