Green Power Solutions srl Phone: +39-011-988 2251 Fax: +39-011-988 1358 Web: www.gpsemi.it e-mail: [email protected] Via Venezia 34D - 10088 Volpiano (TO), Italy GT0001 PULSE TRANSFORMER MODULE LINE VOLTAGE UP TO 750V DEVICE CHIP SIZE UP TO 77mm (3") • High compactness • Possibility of multiple configurations • DIN Rail Mounting • Protection against electrical noise The GT0001 pulse transformer module can be used for a galvanically insulated interface between the control board and the power converter. The circuit includes components for the reduction of the electromagnetic noise at the gate-cathode terminals. ELECTRICAL CHARACTERISCICS Characteristic VINS (RMS) Maximum insulation voltage ΦMAX Maximum transformer V µs V (RMS) Nominal working voltage TR Maximum pulse rise time CC Maximum coupling capacitance N Transformer turns ratio Conditions Value 4000 V @ IOUT=100mA 900 V µs 750 V On 10 Ω resistor 2 µs 100 pF 3:1 MECHANICAL AND THERMAL CHARACTERISTICS Width 45 mm Depth 52 mm Height 75 mm Ta max Max amb. op. Temp. 50 °C Tstg Storage temperature -40/60 °C Document SA0019-XXT001 GT0001 PULSE TRANSFORMER MODULE D1 2 TR1 1 ° ° D2 2 1 2 1 1 R1 D3 3 (P) 1 2 TR2 1 ° 4 ° 1 4 (G) 2 C2 4 2 3 14 (K) D4 2 R2 1 (T) C1 2 3 13 (T) 16 (G) 1 15 (P) 2 (K) In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document SA0019-XXT001