IPB09N03LA IPI09N03LA, IPP09N03LA OptiMOS®2 Power-Transistor Product Summary Features • Ideal for high-frequency dc/dc converters • N-channel V DS 25 V R DS(on),max (SMD version) 8.9 mΩ ID 50 A • Logic level • Excellent gate charge x R DS(on) product (FOM) • Very low on-resistance R DS(on) • Superior thermal resistance P-TO263-3-2 P-TO262-3-1 P-TO220-3-1 • 175 °C operating temperature • dv /dt rated Type Package Ordering Code Marking IPB09N03LA P-TO263-3-2 Q67042-S4151 09N03LA IPI09N03LA P-TO262-3-1 Q67042-S4152 09N03LA IPP09N03LA P-TO220-3-1 Q67042-S4153 09N03LA Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Continuous drain current ID Value T C=25 °C1) 50 T C=100 °C 46 Unit A Pulsed drain current I D,pulse T C=25 °C2) 350 Avalanche energy, single pulse E AS I D=45 A, R GS=25 Ω 75 mJ Reverse diode dv /dt dv /dt I D=50 A, V DS=20 V, di /dt =200 A/µs, T j,max=175 °C 6 kV/µs Gate source voltage3) V GS Power dissipation P tot Operating and storage temperature T j, T stg T C=25 °C IEC climatic category; DIN IEC 68-1 Rev. 1.3 ±20 V 63 W -55 ... 175 °C 55/175/56 page 1 2003-12-18 IPB09N03LA IPI09N03LA, IPP09N03LA Parameter Values Symbol Conditions Unit min. typ. max. - - 2.4 minimal footprint - - 62 6 cm2 cooling area4) - - 40 Thermal characteristics Thermal resistance, junction - case R thJC SMD version, device on PCB R thJA K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D=1 mA 25 - - Gate threshold voltage V GS(th) V DS=V GS, I D=20 µA 1.2 1.6 2 Zero gate voltage drain current I DSS V DS=25 V, V GS=0 V, T j=25 °C - 0.1 1 V DS=25 V, V GS=0 V, T j=125 °C - 10 100 V µA Gate-source leakage current I GSS V GS=20 V, V DS=0 V - 10 100 nA Drain-source on-state resistance R DS(on) V GS=4.5 V, I D=30 A - 12.4 15.5 mΩ V GS=4.5 V, I D=30 A, SMD version - 12.1 15.1 V GS=10 V, I D=30 A - 7.7 9.2 V GS=10 V, I D=30 A, SMD version - 7.4 8.9 - 1 - Ω 21 42 - S Gate resistance RG Transconductance g fs |V DS|>2|I D|R DS(on)max, I D=30 A 1) Current is limited by bondwire; with an R thJC=2.4 K/W the chip is able to carry 64 A. 2) See figure 3 3) T j,max=150 °C and duty cycle D <0.25 for V GS<-5 V 4) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Rev. 1.3 page 2 2003-12-18 IPB09N03LA IPI09N03LA, IPP09N03LA Parameter Values Symbol Conditions Unit min. typ. max. - 1240 1649 - 530 704 Dynamic characteristics Input capacitance C iss Output capacitance C oss Reverse transfer capacitance Crss - 81 122 Turn-on delay time t d(on) - 9 13 Rise time tr - 88 132 Turn-off delay time t d(off) - 22 33 Fall time tf - 4.2 6 Gate to source charge Q gs - 4.4 5.8 Gate charge at threshold Q g(th) - 2.0 2.6 Gate to drain charge Q gd - 3.1 4.7 Switching charge Q sw - 5.5 7.9 Gate charge total Qg - 10 14 Gate plateau voltage V plateau - 3.5 - Gate charge total, sync. FET Q g(sync) V DS=0.1 V, V GS=0 to 5 V - 9 12 Output charge Q oss V DD=15 V, V GS=0 V - 11 15 - - 50 - - 350 V GS=0 V, V DS=15 V, f =1 MHz V DD=15 V, V GS=10 V, I D=25 A, R G=2.7 Ω pF ns Gate Charge Characteristics5) V DD=15 V, I D=25 A, V GS=0 to 5 V nC V nC Reverse Diode Diode continous forward current IS Diode pulse current I S,pulse Diode forward voltage V SD V GS=0 V, I F=50 A, T j=25 °C - 0.98 1.2 V Reverse recovery charge Q rr V R=15 V, I F=I S, di F/dt =400 A/µs - - 10 nC 5) T C=25 °C A See figure 16 for gate charge parameter definition Rev. 1.3 page 3 2003-12-18 IPB09N03LA IPI09N03LA, IPP09N03LA 1 Power dissipation 2 Drain current P tot=f(T C) I D=f(T C); V GS≥10 V 70 60 60 50 40 I D [A] P tot [W] 40 30 20 20 10 0 0 0 50 100 150 200 0 50 100 T C [°C] 150 200 T C [°C] 3 Safe operation area 4 Max. transient thermal impedance I D=f(V DS); T C=25 °C; D =0 Z thJC=f(t p) parameter: t p parameter: D =t p/T 1000 10 limited by on-state resistance 1 µs 10 µs 1 Z thJC [K/W] I D [A] 100 100 µs DC 1 ms 10 0.5 0.2 0.1 0.05 0.1 0.02 10 ms 0.01 single pulse 1 0.01 0.1 1 10 100 10 0 -5 100-4 10-3 0 10 -20 10-10 10 0 1 t p [s] V DS [V] Rev. 1.3 010-6 page 4 2003-12-18 IPB09N03LA IPI09N03LA, IPP09N03LA 5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 30 80 3.2 V 10 V 70 3.5 V 3.8 V 4.1 V 4.5 V 4.5 V 25 60 20 4.1 V R DS(on) [mΩ] I D [A] 50 40 3.8 V 30 15 10 3.5 V 20 10 V 5 3.2 V 10 3V 2.8 V 0 0 0 1 2 0 3 20 40 V DS [V] 60 80 100 I D [A] 7 Typ. transfer characteristics 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C parameter: T j 100 70 90 60 80 50 70 g fs [S] I D [A] 60 50 40 30 40 30 20 20 10 175 °C 10 25 °C 0 0 0 1 2 3 4 5 20 40 60 80 I D [A] V GS [V] Rev. 1.3 0 page 5 2003-12-18 IPB09N03LA IPI09N03LA, IPP09N03LA 9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D=30 A; V GS=10 V V GS(th)=f(T j); V GS=V DS parameter: I D 18 2.5 16 2 14 200 µA 98 % V GS(th) [V] R DS(on) [mΩ] 12 10 typ 8 1.5 20 µA 1 6 4 0.5 2 0 0 -60 -20 20 60 100 140 180 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. Capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz I F=f(V SD) parameter: T j 10000 1000 25 °C 1000 100 Ciss Coss 175°C 98% IF [A] C [pF] 175 °C 25°C 98% 100 10 Crss 1 10 0 5 10 15 20 25 30 V DS [V] Rev. 1.3 page 6 0.0 0.5 1.0 1.5 2.0 VSD [V] 2003-12-18 IPB09N03LA IPI09N03LA, IPP09N03LA 13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 Ω V GS=f(Q gate); I D=25 A pulsed parameter: T j(start) parameter: V DD 100 12 15 V 10 25 °C 100 °C 150 °C 5V 20 V V GS [V] IAV [A] 8 10 6 4 2 1 0 1 10 100 1000 0 10 20 Q gate [nC] t AV [µs] 15 Drain-source breakdown voltage 16 Gate charge waveforms V BR(DSS)=f(T j); I D=1 mA 29 V GS 28 Qg 27 V BR(DSS) [V] 26 25 24 V g s(th) 23 22 Q g (th) 21 Q sw Q gs 20 -60 -20 20 60 100 140 Q gate Q gd 180 T j [°C] Rev. 1.3 page 7 2003-12-18 IPB09N03LA IPI09N03LA, IPP09N03LA Package Outline P-TO263-3-2: Outline Footprint Packaging Dimensions in mm Rev. 1.3 page 8 2003-12-18 IPB09N03LA IPI09N03LA, IPP09N03LA P-TO262-3-1: Outline P-TO220-3-1: Outline Packaging Dimensions in mm Rev. 1.3 page 9 2003-12-18 IPB09N03LA IPI09N03LA, IPP09N03LA Published by Infineon Technologies AG Bereich Kommunikation St.-Martin-Straße 53 D-81541 München © Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts started herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies office in Germany or our Infineon Technologies representatives worldwide (see address list). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Infineon Technologies' components may only be used in life-support devices or systems with the expressed written approval of Infineon Technologies if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.3 page 10 2003-12-18