LED-40W Series– Line Voltage Dimmable Constant Current LED Drivers CCR Dimming: <10%-100%, both ELV & Inc in the same unit. Black Magic Thermal Advantage™ Plastic Housing Electrical Specifications Input Voltage Range: 120V model 100-120Vac Nom. (90-135V Min/Max) 230V model (with dimmer) 230Vac Nom. (180-264V Min/Max) 230V model (w/o dimmer) 230Vac Nom. (180-305V Min/Max) Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 120Vac (no dimmer) Inrush Current: <15.0 Amps @ 120Vac, cold start 25ºC, max load Input Current: 0.40 Amps @ 120Vac, 60Hz, max load Maximum Power: 40W Line Regulation: ± 3% Load Regulation: ± 5% Output Protection: Over-Voltage, Over-Current, and Short Circuit Protection with Auto Recovery Environmental Specifications Maximum Case Temp. 85°C Minimum Starting Temp: -30ºC Storage Temperature: -40ºC to +85ºC Humidity: 5% to 95% Cooling: Convection Vibration Frequency: 5 to 55 Hz/2g, 30 minutes Sound Rating: Class A Impact Resistance: 1g/s MTBF: 375,000 Hours @ full load, 40ºC ambient conditions per MIL-217F Notice 2 EMC: FCC 47CFR Part 15 Class B compliant Weight: 11 oz. (311 g) • Smallest Footprint Driver for this wattage • Total Power: 40 Watts • Input Voltage: 120Vac or 230Vac • UL Dry & Damp Location Rated • IP66 & NEMA4 • High Power Factor 120Vac Input - ELV & INC Dimming Specifications Model Number Output Voltage Output Current Max. Output Typical Range (Vdc) (mA ±5%) Power (W) Efficiency LED40W120-114-C0350-LT 57-114 350 40 LED40W120-054-C0700-LT 27-54 700 37.8 85% 85% LED40W120-040-C1000-LT 20-40 1000 40 84% LED40W120-036-C1100-LT 18-36 1100 39.6 84% LED40W120-030-C1300-LT 15-30 1300 39.0 83% LED40W120-024-C1670-LT 12-24 1670 40 82% 230Vac Input - ELV & INC Dimming Specifications Model Number Sign Components Manual Output Voltage Output Current Max. Output Typical Range (Vdc) (mA ±5%) Power (W) Efficiency LED40W230-114-C0350-LT 57-114 350 40 LED40W230-054-C0700-LT 27-54 700 37.8 86% 86% LED40W230-040-C1000-LT 20-40 1000 40 85% LED40W230-036-C1100-LT 18-36 1100 39.6 85% LED40W230-030-C1300-LT 15-30 1300 39.0 84% LED40W230-024-C1670-LT 12-24 1670 40 Class 2: 83% US/Canada US Only E332160 Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Specifications subject to change without notice. Rev 8-26-15 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED40W-LT Series SSL Solutions Faster Than The Speed Of Light® Dimensions - Inches (mm) 5.91 Min [150 Min] 0.45 [11.4] 1.50 [38.1] 0.14 [3.6] 0.2 [5.0] WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. All wires are stranded with solder dipped ends. Tc=90°C 3.78 [96.0] INPUT White (N) Black (L) OUTPUT Red (+) Blue (-) 0.39 [10.0] 0.39±0.04 [10.0±1] 0.16 [4.0] 1.26 [32.0] 0.39 [10.0] 1.20 [30.5] 2.80 [71.0] Output Current / Dimmer Conduction Angle Output Current % 110 100 90 80 70 60 50 40 30 20 10 0 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 Triac or ELV Dimmer Angle (Degrees) 130 Lifetime / Case Temperature Safety and EMC Compliance UL/CUL CE FCC, 47CFR Part 15 EN61000-3-2 EN61000-3-3 EN61000-4-5 Lifetime (kHrs) 115 90 75 60 45 Class C 2kV/4kV UL Conditions of Acceptability 30 15 0 40 UL8750, CSA-C22.2 EN 61347 Class B See website for additional information 45 50 55 60 65 70 75 80 Case Hotspot Temperature (°C) 85 Note: Life calculations are based on reliability with confidence using a 90% confidence level and <5% failure rate. At a confidence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (Failure is defined as a driver drifting outside specification, rather than fail to operate) Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com