153.6MHz SAW Filter 20MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN15403 www.sipatsaw.com Features For IF SAW filter Single-ended operation Ceramic Surface Mount Package Small size RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz - 153.6 - Insertion Loss dB - 11.2 12 1dB Bandwidth MHz 20 22.35 - Passband Variation(143.6～163.6MHz) dB - 0.5 1 Phase Linearity(143.6～163.6MHz) deg - 5 5 Group Delay Variation(143.6～163.6MHz) nsec - 40 60 Absolute Delay usec - 0.59 - Input/output return loss dB 10 11 - 10～105MHz dB 50 56 - 200～230MHz dB 52 60 - 230～1000MHz dB 40 67 - Ultimate Rejection Material Temperature coefficient KHz/°C -14.44 Substrate Material - YZ LN Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1A SMD7.0*5.0 Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBN15403 Rev. Date 2008-09-05 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 153.6MHz SAW Filter 20MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN15403 www.sipatsaw.com Matching Configuration L1 INPUT 50 L1=(82+5)nH L2 OUTPUT 50 C1=33pF L2=68nH C2=22pF R1=330Ω Source/Load Impedance=50 ohm C1 C2 R1 Notes - Component values may change depending on board layout. Package Dimension 7.00 10 Pad Configuration: 6 5 SIPAT LBN15403 XXYYZZ 2 4 Ground: All Others Marking Configuration: 1) •: Pad Number 1 Index 1.00 2 Output: 3 0.60 1 9 4 1.00 1 Input: 5.00 9 7 1.60 8 2) SIPAT: Manufacturer Name 3 3) LBN15403: Part Number 4 9 5 4) XXYY: Date(Year/month) 2.54 10 8 7 5) ZZ: Identified Code 6 1.27 Package: SMD7.0*5.0 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBN15403 Rev. Date 2008-09-05 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 153.6MHz SAW Filter 20MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN15403 www.sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance Type Performance -1.2149 -9.7149 -11.2149 -10.2149 -21.2149 -10.7149 -11.2149 Amplitude ripple(dB) -41.2149 -51.2149 -61.2149 -11.7149 -12.2149 -71.2149 -12.7149 -81.2149 -13.2149 -91.2149 -101.2149 -13.7149 60 80 100 120 140 160 180 Frequency(MHz) Horizontal: 20MHz/Div 200 220 130 240 Vertical: 10dB/Div 135 140 145 150 155 Frequency(MHz) 160 Horizontal: 5MHz/Div Group Delay Variation(f0±10MHz) 165 170 175 180 Vertical: 0.5dB/Div Phase Linearity(f0±10MHz) Type Performance Type Performance 30 800 750 20 700 10 650 X: 143.6 Y: 584.3 600 X: 163.6 Y: 583.8 550 X: 163.6 Y: 2.103 X: 153.6 Y: 0.91 X: 143.6 Y: -0.5017 X: 153.6 Y: 606.9 Degree(deg) Group Delay Time(ns) 0 -10 500 -20 450 -30 400 145 150 155 Frequency(MHz) 160 Horizontal: 5MHz/Div 165 -40 170 Vertical: 50ns/Div 135 140 145 150 Horizontal: 5MHz/Div Smith Chart S11 +j2.0 -j0.2 +j2.0 +j5.0 +j0.2 ∞ 0.0 -j5.0 0.5 5.0 2.0 1.0 +j5.0 0.5 170 Vertical: 10deg/Div +j0.5 0.2 +j0.2 ∞ -j5.0 -j0.2 -j0.5 -j2.0 -j2.0 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 165 +j1.0 +j0.5 -j0.5 160 Smith Chart S22 +j1.0 0.0 155 Frequency(MHz) 5.0 140 2.0 135 1.0 350 0.2 Magnitude(dB) -31.2149 Part Number LBN15403 Rev. Date 2008-09-05 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3