DESIGNED & DIMENSIONED IN MILLIMETERS[INCHES] REVISION AF C "A" REF (SEE SHT 2, TABLE 4) DO NOT SCALE FROM THIS PRINT "B" REF (SEE SHT 2, TABLE 4) 59 POSITION #1 INDICATOR 3.36 .132 REF C 0.800 .0315 (TYP) (TOL. NON-ACCUM) 60 C 3.35 .132 REF ERF8-XXX-XX.X-X-DV-XXXX-TR No OF POSITIONS (PER ROW) -005, -010, -011, -013, -020, -023, -025, -030, -035, -040, -049, -050, -060, -070, -075,-100 AF (-100 POSITION AVAILABLE IN -05.0 ONLY SEE NOTE 9) LEAD STYLE 01 -05.0 = 5mm -07.0 = 7mm **-10.0 = 10mm 5.60 .220 PLATING SPECIFICATION REF -L: 10µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL (USE C-211-XX.X-L) -S: 30µ" SELECTIVE GOLD IN CONTACT AREA, 02 MATTE TIN ON TAIL (USE C-211-XX.X-S) "C" (SEE SHT 2, TABLE 4) ERF8-XXX-XX.X-DV-01 (SEE TABLE 3) ROW SPECIFICATION -DV: DOUBLE VERTICAL "A" OPTION -K: POLYIMIDE FILM PAD (SEE FIG 2) -L: LATCHES (-05.0 LEAD STYLE ONLY, SEE NOTE 5, SEE FIG 5) -EGP: EXTENDED GUIDE POST (SEE NOTE 6, SEE FIG 3) -EGPS: EXTENDED GUIDE POST SHIELD (ONLY AVAILABLE IN ***-10.0 LEAD STYLE AND ONLY -10, -20, -25 & -30 POSITIONS SEE FIG 6) -L2: LATCH WITH LONG WELD TAB (-05.0 & -07.0 LEAD STYLE ONLY, SEE FIG 5) -E: EXTENDED GUIDE POST WITH LONG WELD TAB, SEE FIG 3) -W: WELD TAB (-05.0 & -07.0 LEAD STYLE ONLY, SEE FIG 10) *** *** *** ** = NOT TOOLED *** = NOT RELEASED FOR PRODUCTION 2.58±0.12 .101±.005 C "E" REF 5.40 .213 REF 1.10 .043 REF DETAIL 'D' SCALE 4 : 1 1.32 .052 REF 1.32 .052 REF TAPE & REEL (STANDARD PACKAGING) (NOT AVAILABLE IN 100 POS) (SEE NOTE 4 & 7) "A" 1.24 .049 REF 0.50 [.020] x 45 REF C "C" (SEE SHT 2, TABLE 4) "N" (REF) 3 MAX SWAY (TYP) CL 'D' 0.23 .009 REF C C-211-XX.X-X (SEE TABLE 3) "F"(TYP) (SEE SHT 2, TABLE 5) 1.04 .041 REF (2 PLCS) SEE TABLE 1 CL CL 0.90 .036 REF 5.41±0.25 .213±.010 1.50 .059 REF 0.800 .0315 (TYP) C (TOL NON-ACCUM) "D" REF (SEE SHT 2, TABLE 4) C C SECTION "A"-"A" SCALE 5 : 1 FIG 1 (ERF8-030-05.0-X-DV-XX SHOWN) (CENTER FEATURES REMOVED FOR CLARITY) NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. BURR ALLOWANCE: 0.038[.0015] MAX. 3. MINIMUM PUSHOUT FORCE: 2.22 N [.5 LB.] 4. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR EIA-481-D REEL WILL BE SUPPLIED. FOR QUANTITIES OF 50-124 PIECES, NO LEADER, TRAILOR WILL BE SUPPLIED. 5. NOT AVAILABLE WITH -EGP, -E, -W, -L2 OR -EGPS OPTIONS. 6. OPTION ONLY AVAILABLE ON -07.0 LEAD STYLE. 7. -TR PACKAGING NOT AVAILABLE ON 100 POSITION ONLY AVAILABLE IN TRAYS. 8. NOTE DELETED. AF 9. NOT AVAILABLE WITH -L, -L2, -E, OR -W OPTIONS. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS [INCHES]. TOLERANCES ARE: DECIMALS ANGLES X.X: 0.3 [.01] 2 X.XX: 0.13 [.005] X.XXX: 0.050 [.0020] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING INSULATOR: LCP, COLOR: BLACK CONTACT & LATCHES: BeCu SHIELD: PHOS BRONZE SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. ERF8-XXX-XX.X-X-DV-XXXX-TR BY: KNOWLDEN F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW 9/26/2005 SHEET 1 OF 6 REVISION AF C "H" 0.50[.020] C 0.11±0.076 .004±.003 C +0.5 +.020 0.20 - 0.2 .008 - .008 (TYP) CL 3 MAX SWAY C (TYP) CL "G" 6.00 .236 FIG 2 -K OPTION (USE K-500-300) (ERF8-030-XX.X-X-DV-K SHOWN) "C" C-211-XX.X-X IN-PROCESS VIEW "C" "J" REF (SEE SHT 3, TABLE 6) SEE TABLE 3 1.03 .040 REF 7.00 .276 REF 1.90 .075 REF 5.10 .201 REF 7.25 .285 REF C WT-30-XX-T (SEE TABLE 3) "U" C "L" (SEE SHT 3, TABLE 6) SECTION "C"-"C" SCALE 2.5 : 1 2 MAX SWAY (TYP) "T" C FIG 3 -E AND -EGP OPTION (ERF8-030-07.0-X-DV-EGP SHOWN) (SAME AS FIG 1, EXCEPT AS SHOWN) (AVAILABLE ON -07.0 LEAD STYLE ONLY) (CENTER FEATURES REMOVED FOR CLARITY) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 (** = NOT TOOLED) 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. ERF8-XXX-XX.X-X-DV-XXXX-TR BY: KNOWLDEN 9/26/2005 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW SHEET 2 OF 6 REVISION AF 0.80 .031 CL "E" "B" AF "B" DETAIL "E" SCALE 6 : 1 CL C "K" 0.25 C 2.10 .083 REF "J" REF DETAIL 'G' SCALE 6 : 1 "M" 0.50[.020] C CL CL 'G' 2.50 .098 CL C "U" CL "T" WT-30-XX-F (SEE SHT 2, TABLE 3) C 2 MAX SWAY (TYP) 0.25 .010 REF C "L" SECTION "B"-"B" SCALE 3 : 1 6.00 .236 FIG 5 0.64 .025 REF (ERF8-025-05.0-X-DV-K-L SHOWN) (SAME AS FIG 1 & 2, EXCEPT AS SHOWN) (CENTER FEATURES REMOVED FOR CLARITY) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. ERF8-XXX-XX.X-X-DV-XXXX-TR BY: KNOWLDEN 9/26/2005 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW SHEET 3 OF 6 REVISION AF CL "F" "F" C 6.200 .2441 6.80 .268 7.20 .283 REF "P" C CL CL CL 7.00 .276 REF 6.25 .246 C "T" (SEE SHT 2, TABLE 3) "U" REF (SEE SHT 2, TABLE 3) 0.64 .025 REF 0.64 .025 REF (TYP) SH29-XX-XX-X (SEE SHT 2, TABLE 3) "S" REF CL "R" REF ERF8-XXX-07.0-DV-EGPS (SEE SHT 2, TABLE 3) 5.95 .234 REF CL CL C 0.25 .010 REF "Q" 2° MAX SWAY (TYP) C SECTION "F"-"F" FIG 6 (ERF8-030-07.0-X-EGPS SHOWN) (SAME AS FIG 3, EXCEPT AS SHOWN) (AVAILABLE ON -07.0 LEAD STYLE ONLY) (CENTER FEATURES REMOVED FOR CLARITY) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. ERF8-XXX-XX.X-X-DV-XXXX-TR BY: KNOWLDEN 9/26/2005 SHEET 4 OF 6 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW REVISION AF "J" REF (SEE SHT 3, TABLE 6) "H" 2.58±0.12 .101±.005 "J" 5.40 .213 REF C 1.24 .049 REF WT-67-02-X (2 PLCS) ERF8-XXX-05.0-DV-S C-314-01.0-X "E" "F" C ERF8H-XXX-05.0-DV SEE SHT 1, TABLE 1 "H" "D" REF (SEE SHT 2, TABLE 4) +0.18 5.41 - 0.13 +.007 .213 - .005 C "J" 1.04 .041 REF SECTION "H"-"H" SECTION "J"-"J" FIG 7 (**ERF8-030-10.0-X-DV SHOWN) (CENTER FEATURES REMOVED FOR CLARITY) ** NOT TOOLED 2.10 .083 REF "K" 0.80 .031 WT-67-01-X (2 PLCS) "L" (SEE SHT 3, TABLE 6) C 0.64 .025 REF "K" FIG 8 -EGPS OPTIONS (**ERF8-030-10.0-X-DV-L SHOWN) (SAME AS FIG 7, EXCEPT AS SHOWN) ** NOT TOOLED 0.94 .037 REF WT-30-03-F SECTION "K"-"K" FIG 9 (**ERF8-030-07.0-X-DV-L SHOWN) (SAME AS FIG 5, EXCEPT AS SHOWN) (CENTER FEATURES REMOVED FOR CLARITY) ** NOT TOOLED PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. ERF8-XXX-XX.X-X-DV-XXXX-TR BY:KNOWLDEN 9/26/2005 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW SHEET 5 OF 6 REVISION AF -05.0 SHOWN -07.0 SHOWN "L" -07.0 WITH EGP SHOWN -07.0 WITH EGPS SHOWN **-10.0 WITH -L SHOWN "L" CL C "J" REF 'U' REF (SEE SHT 2, TABLE 3) 'T' (SEE SHT 2, TABLE 3) C WT-30-05-X (SEE TABLE 3) SECTION "L"-"L" SCALE 3 : 1 PROPRIETARY NOTE FIG 10 (ERF8-025-05.0-X-DV-W SHOWN) (SAME AS FIG 5 EXCEPT AS SHOWN) (CENTER FEATURES REMOVED FOR CLARITY) THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. ERF8-XXX-XX.X-X-DV-XXXX-TR BY: KNOWLDEN F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW 9/26/2005 SHEET 6 OF 6