NCX2222 Low voltage comparator; open-drain output Rev. 1 — 20 December 2012 Product data sheet 1. General description The NCX2222 provides a dual, low voltage, low-power comparator with open-drain outputs. The NCX2222 has a very low supply current of 5 A per comparator and is guaranteed to operate at a low voltage of 1.3 V. It is fully operational up to 5.5 V which makes it convenient for use in both 3.0 V and 5.0 V systems. 2. Features and benefits Wide supply voltage range from 1.3 V to 5.5 V (functional operating range) Rail-to-rail input/output performance Very low supply current of 5 A (typical) per comparator Very low-power consumption No phase inversion with overdriven input signals Internal hysteresis Propagation delay of 0.8 s (typical) ESD protection: HBM JESD22-A114F Class 1C. Exceeds 1500 V CDM JESD22-C101E exceeds 1000 V Multiple package options Specified from 40 C to +85 C 3. Applications Cellular telephones Alarm and security systems Personal Digital assistants NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NCX2222DP 40 C to +85 C TSSOP8 plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm SOT505-2 NCX2222GU 40 C to +85 C HXSON8 plastic, thermal enhanced extremely thin small outline SOT972-2[1] package; no leads; 8 terminals; body 1.35 1.7 0.5 mm NCX2222GT 40 C to +85 C XSON8 plastic extremely thin small outline package; no leads; 8 terminals; body 1 1.95 0.5 mm SOT833-1 NCX2222GF 40 C to +85 C XSON8 extremely thin small outline package; no leads; 8 terminals; body 1.35 1 0.5 mm SOT1089 NCX2222GM 40 C to +85 C XQFN8 plastic, extremely thin quad flat package; no leads; 8 terminals; body 1.6 1.6 0.5 mm SOT902-2 [1] Lead pitch is 0.4 mm. 5. Marking Table 2. Marking codes Type number Marking[1] NCX2222DP gb NCX2222GU gb NCX2222GT gb NCX2222GF gb NCX2222GM gb [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. 6. Functional diagram ,1 ,1 ,1 ,1 287 287 DDD Fig 1. Logic symbol NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 2 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 7. Pinning information 7.1 Pinning 1&; 287 9&& ,1 287 ,1 ,1 9(( ,1 1&; 287 9&& ,1 287 ,1 ,1 9(( ,1 9(( DDD 7UDQVSDUHQWWRSYLHZ 7UDQVSDUHQWWRSYLHZ (1) This is not a supply pin, the substrate is attached to this pad using conductive die attach material. There is no electrical or mechanical requirement to solder this pad. However, if it is soldered, the solder land must remain floating or be connected to VEE. Pin configuration SOT972-2 Pin configuration SOT833-1 and SOT1089 9&& ,1 287 ,1 9(( 287 ,1 Fig 3. 1&; WHUPLQDO LQGH[DUHD Fig 2. 1&; ,1 DDD 287 9&& 287 ,1 ,1 ,1 9(( ,1 7UDQVSDUHQWWRSYLHZ Fig 4. Pin configuration SOT902-2 NCX2222 Product data sheet DDD Fig 5. Pin configuration SOT505-2 All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 3 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 7.2 Pin description Table 3. Pin description Symbol Pin Description OUT1 1 comparator output 1 IN1 2 comparator input 1 (negative) IN1+ 3 comparator input 1 (positive) VEE 4 supply voltage IN2+ 5 comparator input 2 (positive) IN2 6 comparator input 2 (negative) OUT2 7 comparator output 2 VCC 8 supply voltage 8. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VEE. Symbol Parameter VCC supply voltage Conditions Min Max Unit - 7.0 V 0.5 VCC + 0.5 V VEE 0.5 7.0 V - indefinite s maximum junction temperature - +150 C Tstg storage temperature 65 +150 C Ptot total power dissipation - 250 mW VI input voltage VO output voltage tsc(o) output short-circuit time Tj(max) [1] IN1, IN1+, IN2, IN2+ inputs [1] Tamb = 40 C to +85 C Do not exceed the maximum total power dissipation. 9. Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit VCC supply voltage VCC to VEE full spec operating range 1.6 - 5.5 V functional operating range 1.3 - 5.5 V VI input voltage VEE - VCC V VO output voltage VEE - 5.5 V Tamb ambient temperature 40 - +85 C NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 4 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 10. Static characteristics Table 6. Static characteristics At recommended operating conditions. VCC = 1.6 V to 5.5 V, VEE = 0 V; VCM = 0.5VCC unless otherwise specified. Symbol Parameter 25 C Conditions Min Max Min Max 6 9 13 - - mV - 20 - - - mV [1] 30 +0.5 +30 30 +30 mV [1] - 3 - - - mV VCC = 1.3 V VI(offset) offset input voltage VCC = 1.3 V LOW-level output voltage VOL Unit Typ hysteresis voltage VH 40 C to +85 C IO = 0.5 mA; VCC = 1.3 V - 0.05 - - - V IO = 0.5 mA; VCC = 1.6 V - 0.04 - - 0.25 V IO = 3 mA; VCC = 3.0 V - 0.14 - - 0.3 V IO = 5 mA; VCC = 5.5 V - 0.20 - - 0.3 V IOZ OFF-state output current IN = VEE; IN+ = VCC; VO = 5.5 V - 3 - - - nA VCM common-mode voltage VCC = 1.3 V to 5.5 V - VEE to VCC - - - V IOS output short-circuit VCC = 5.5 V; VO = VEE or VCC current - 68 - - - mA CMRR common-mode rejection ratio VCM = VCC - 70 - - - dB PSRR power supply rejection ratio VCC = 1.95 V 45 80 - - - dB IIB input bias current - 1.0 - - - pA ICC supply current - 5.0 - - 7.0 A [1] per comparator Differential input switching level is guaranteed at the minimum or maximum offset voltage, minus or plus half the maximum hysteresis voltage. 11. Dynamic characteristics Table 7. Dynamic characteristics Voltages are referenced to VEE (VEE = 0 V);VCC = 1.6 V to 5.5 V; VCM = 0.5VCC unless otherwise specified. Symbol Parameter 25 C Conditions tpd propagation delay 20 mV overdrive; CL = 15 pF [1] tt transition time HIGH to LOW; VCC = 5.5 V; CL = 50 pF [2] [1] tpd is the same as tPLZ and tPZL; tPLZ is the actual time that the output is disabled. [2] Input signal: 1 kHz, square wave signal with 10 ns edge rate. NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 Unit Min Typ Max - 0.8 - s - 10 - ns © NXP B.V. 2012. All rights reserved. 5 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 12. Graphs 001aan901 9.0 ICC (μA) DDD ,&& $ 7.0 5.0 3.0 1.0 -40 -20 0 20 40 60 80 100 Temp (°C) I N+] Tamb = 25 C; CL = 15 pF. VCC = 5.0 V. (1) VCC = 5.0 V. (2) VCC = 2.7 V. Fig 6. Supply current versus temperature (per comparator) Fig 7. Supply current versus output transition frequency (per comparator) 001aan903 8.0 ICC (μA) 001aan858 103 VOL (mV) 6.0 102 (1) 4.0 (2) 10 (3) 2.0 1 0.0 0.0 2.0 4.0 6.0 10-1 10-2 VCC (V) 10-1 1 10 IO (mA) (1) Tamb = 40 C. Tamb = 25 C. (2) Tamb = 25 C. VCC = 5.0 V. (3) Tamb = 85 C. Fig 8. Supply current versus supply voltage (per comparator) NCX2222 Product data sheet Fig 9. LOW-level output voltage versus output current All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 6 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 001aan860 220 VOL (mV) 180 001aan861 1400 tpd (ns) 1000 (1) 600 (2) 140 100 60 20 -40 0 40 80 200 -50 120 Temp (°C) 0 50 100 Temp (°C) VCC = 5.0 V; input overdrive = 50 mV. IO = 4.0 mA. VCC = 5.0 V. (1) tPLZ. (2) tPZL. Fig 10. LOW-level output voltage versus temperature Fig 11. Propagation delay versus temperature 001aan862 700 tpd (ns) 500 (1) 300 (2) 100 1 2 3 4 5 6 VCC (V) Tamb = 25 C; input overdrive = 100 mV. (1) tPLZ. (2) tPZL. Fig 12. Propagation delay versus supply voltage. NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 7 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 13. Application information 13.1 Operating description The NCX2222 is a dual, low voltage, low-power comparator with open-drain output. This device is designed for use with a pull-up resistor to define the output switching levels. This device consumes only 5 A per comparator of supply current while achieving a typical propagation delay of 0.8 s at a 20 mV input overdrive. Figure 11 and Figure 12 show propagation delay with various input overdrives. This comparator is guaranteed to operate at a low voltage of 1.3 V up to 5.5 V. The common-mode input voltage range extends 0.1 V beyond the upper and lower rail without phase inversion or other adverse effects. This device has a typical internal hysteresis of 9.0 mV which allows for greater noise immunity and clean output switching. 13.2 Output stage The NCX2222 has an N-channel output stage that has the capability of sinking the output to VEE with a load ranging up to 5.0 mA (see Figure 13). VCC IN+ output IN- VEE aaa-000067 Fig 13. NCX2222 output configuration (one comparator) 13.3 Zero-crossing detector Figure 14 shows the NCX2222 configured as a zero-crossing detector. 9&& ,1 ,1 9&& 538 287 1&; P9 DDD Fig 14. Zero-crossing detector NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 8 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 13.4 Logic level translator Figure 15 shows the NCX2222 configured as a logic level translator. 9 9 538 Nȍ ,1 Nȍ ,1 287 1&; 9ORJLFLQSXW 9ORJLFRXWSXW DDD This circuit converts 3 V logic to 5 V logic. Fig 15. Logic level translator NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 9 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 14. Package outline TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm D E A SOT505-2 X c HE y v M A Z 5 8 A A2 (A3) A1 pin 1 index θ Lp L 1 4 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(1) e HE L Lp v w y Z(1) θ mm 1.1 0.15 0.00 0.95 0.75 0.25 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.5 0.47 0.33 0.2 0.13 0.1 0.70 0.35 8° 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT505-2 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 02-01-16 --- Fig 16. Package outline SOT505-2 (TSSOP8) NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 10 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output HXSON8: plastic, thermal enhanced extremely thin small outline package; no leads; 8 terminals; body 1.35 x 1.7 x 0.5 mm SOT972-2 X A B D E A A1 c terminal 1 index area detail X e1 terminal 1 index area e 1 6 C C A B C v w b y1 C y L k Eh 12 7 Dh 0 1 scale Dimensions Unit(1) mm max nom min 2 mm A 0.5 A1 b c D 0.05 0.25 1.8 0.20 0.127 1.7 0.00 0.15 1.6 Dh 1.3 1.2 1.1 E Eh 1.45 0.45 1.35 0.40 1.25 0.35 e e1 0.4 k L v 0.1 0.2 0.30 0.25 0.20 1.2 w y y1 0.05 0.05 0.05 Note 1. Plastic or metal protrusions 0.0075 mm maximum per side are not included. References Outline version IEC JEDEC JEITA SOT972-2 --- --- --- sot972-2_po European projection Issue date 09-12-11 10-03-23 Fig 17. Package outline SOT972-2 (HXSON8) NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 11 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm 1 2 SOT833-1 b 4 3 4× (2) L L1 e 8 7 6 e1 5 e1 e1 8× A (2) A1 D E terminal 1 index area 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A(1) max A1 max b D E e e1 L L1 mm 0.5 0.04 0.25 0.17 2.0 1.9 1.05 0.95 0.6 0.5 0.35 0.27 0.40 0.32 Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. REFERENCES OUTLINE VERSION IEC JEDEC JEITA SOT833-1 --- MO-252 --- EUROPEAN PROJECTION ISSUE DATE 07-11-14 07-12-07 Fig 18. Package outline SOT833-1 (XSON8) NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 12 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output XSON8: extremely thin small outline package; no leads; 8 terminals; body 1.35 x 1 x 0.5 mm SOT1089 E terminal 1 index area D A A1 detail X (4×)(2) e L (8×)(2) b 4 5 e1 1 terminal 1 index area 8 L1 X 0 0.5 scale Dimensions Unit mm max nom min 1 mm A(1) 0.5 A1 b D E e e1 L L1 0.35 0.40 0.04 0.20 1.40 1.05 0.15 1.35 1.00 0.55 0.35 0.30 0.35 0.27 0.32 0.12 1.30 0.95 Note 1. Including plating thickness. 2. Visible depending upon used manufacturing technology. Outline version SOT1089 sot1089_po References IEC JEDEC JEITA European projection Issue date 10-04-09 10-04-12 MO-252 Fig 19. Package outline SOT1089 (XSON8) NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 13 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output XQFN8: plastic, extremely thin quad flat package; no leads; 8 terminals; body 1.6 x 1.6 x 0.5 mm SOT902-2 X A B D terminal 1 index area E A A1 detail X e v w b 4 3 C C A B C y y1 C 5 e1 2 6 1 7 terminal 1 index area 8 L metal area not for soldering L1 0 1 Dimensions Unit(1) mm max nom min 2 mm scale A 0.5 A1 b D E e e1 0.05 0.25 1.65 1.65 0.20 1.60 1.60 0.55 0.00 0.15 1.55 1.55 0.5 L L1 v 0.35 0.15 0.30 0.10 0.25 0.05 0.1 w y y1 0.05 0.05 0.05 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. References Outline version IEC JEDEC JEITA SOT902-2 --- MO-255 --- sot902-2_po European projection Issue date 10-11-02 11-03-31 Fig 20. Package outline SOT902-2 (XQFN8) NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 14 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 15. Abbreviations Table 8. Abbreviations Acronym Description CDM Charged Device Model ESD ElectroStatic Discharge HBM Human Body Model 16. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes NCX2222 v.1 20121220 Product data sheet - - NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 15 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 17. Legal information 17.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 17.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 17.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. NCX2222 Product data sheet Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 16 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 17.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 18. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] NCX2222 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 20 December 2012 © NXP B.V. 2012. All rights reserved. 17 of 18 NCX2222 NXP Semiconductors Low voltage comparator; open-drain output 19. Contents 1 2 3 4 5 6 7 7.1 7.2 8 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 16 17 17.1 17.2 17.3 17.4 18 19 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recommended operating conditions. . . . . . . . 4 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5 Dynamic characteristics . . . . . . . . . . . . . . . . . . 5 Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Application information. . . . . . . . . . . . . . . . . . . 8 Operating description . . . . . . . . . . . . . . . . . . . . 8 Output stage . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Zero-crossing detector . . . . . . . . . . . . . . . . . . . 8 Logic level translator. . . . . . . . . . . . . . . . . . . . . 9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 15 Legal information. . . . . . . . . . . . . . . . . . . . . . . 16 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 16 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Contact information. . . . . . . . . . . . . . . . . . . . . 17 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2012. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 20 December 2012 Document identifier: NCX2222 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: NXP: NCX2222DPH NCX2222GMH