Hittite HMC583LP5 Mmic vco w/ half frequency output & divide-by-4, 11.5 - 12.8 ghz Datasheet

HMC583LP5 / 583LP5E
v00.0606
Typical Applications
Features
Low noise MMIC VCO w/Half Frequency, Divide-by-4
Outputs for:
Dual Output: Fo = 11.5 - 12.8 GHz
Fo/2 = 5.75 - 6.4 GHz
• Point to Point/Multipoint Radio
Pout: +11 dBm
• Test Equipment & Industrial Controls
Phase Noise: -110 dBc/Hz @100 kHz Typ.
• SATCOM
No External Resonator Needed
• Military End-Use
QFN Leadless SMT Package, 25 mm2
Functional Diagram
General Description
The HMC583LP5 & HMC583LP5E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs.
The HMC583LP5 & HMC583LP5E integrate resonators, negative resistance devices, varactor diodes
and feature half frequency and divide-by-4 outputs.
The VCO’s phase noise performance is excellent over
temperature, shock, and process due to the oscillator’s
monolithic structure. Power output is +11 dBm typical
from a +5V supply voltage. The prescaler and RF/2
functions can be disabled to conserve current if not
required. The voltage controlled oscillator is packaged
in a leadless QFN 5x5 mm surface mount package,
and requires no external matching components.
11
VCOS & PLOs - SMT
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Electrical Specifications, TA = +25° C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V
Parameter
Frequency Range
Min.
Fo
Fo/2
RFOUT
RFOUT/2
RFOUT/4
Power Output
+7
+9
-9
+13
+15
-3
Icc(Dig) + Icc(Amp) + Icc(RF)
2
310
350
Tune Port Leakage Current (Vtune= 12V)
Output Return Loss
dBm
dBm
dBm
dBc/Hz
12
V
390
mA
10
μA
2
dB
26
22
30
dBc
dBc
dBc
Pulling (into a 2.0:1 VSWR)
3
MHz pp
Pushing @ Vtune= 5V
20
MHz/V
Frequency Drift Rate
1.0
MHz/°C
Harmonics/Subharmonics
11 - 206
Units
GHz
GHz
-110
Vtune
Supply Current
Max.
11.5 - 12.8
5.75 - 6.4
SSB Phase Noise @ 100 kHz Offset,
Vtune= +5V @ RFOUT
Tune Voltage
Typ.
1/2
2nd
3rd
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC583LP5 / 583LP5E
v00.0606
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Frequency vs. Tuning Voltage, Vcc = +5V
Frequency vs. Tuning Voltage, T= 25°C
13.2
OUTPUT FREQUENCY (GHz)
13.6
13.2
12.8
12.8
12.4
12.4
12
11.6
12
11.6
11.2
11.2
10.8
10.8
+25C
+85C
-40C
10.4
10
10
9.6
9.6
0
1
2
3
4
5
6
7
8
4.75V
5.00V
5.25V
10.4
9
10
11 12
13
0
1
2
3
4
TUNING VOLTAGE (VOLTS)
700
16
600
14
+25C
+85C
-40C
400
300
200
100
7
8
9
10
11 12
13
11
12
10
8
6
+25C
+85C
-40C
4
2
0
0
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
4
TUNING VOLTAGE (VOLTS)
-20
SSB PHASE NOISE (dBc/Hz)
0
-75
-80
-85
-90
10kHz OFFSET
100kHz OFFSET
-100
6
7
8
9
10
11 12
13
SSB Phase Noise @ Vtune = +5V
-70
-95
5
TUNING VOLTAGE (VOLTS)
SSB Phase Noise vs. Tuning Voltage
SSB PHASE NOISE (dBc/Hz)
6
Output Power
vs. Tuning Voltage, Vcc = +5V
OUTPUT POWER (dBm)
SENSITIVITY (MHz/Volt)
Sensitivity vs. Tuning Voltage, Vcc = +5V
500
5
TUNING VOLTAGE (VOLTS)
-40
VCOS & PLOs - SMT
OUTPUT FREQUENCY (GHz)
13.6
+25C
+85C
-40C
-60
-80
-100
-120
-105
-140
-110
-160
-115
-120
0
1
2
3
4
5
6
7
8
9
TUNING VOLTAGE (VOLTS)
10
11 12
13
-180
3
10
4
10
5
10
6
10
7
10
OFFSET FREQUENCY (Hz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 207
HMC583LP5 / 583LP5E
v00.0606
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
RFOUT/2 Output Power
vs. Tuning Voltage, Vcc = +5V
6.8
16
6.6
14
6.4
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
RFOUT/2 Frequency
vs. Tuning Voltage, Vcc = +5V
6.2
6
5.8
5.6
5.4
+25C
+85C
-40C
5.2
6
+25C
+85C
-40C
4
1
2
3
4
5
6
7
8
9
10
11 12
0
13
1
2
3
4
5
6
7
8
9
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Divide-by-4 Frequency
vs. Tuning Voltage, Vcc = +5V
Divide-by-4 Output Power
vs. Tuning Voltage, Vcc = +5V
3.4
0
3.3
-1
3.2
-2
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
VCOS & PLOs - SMT
8
0
0
11 - 208
10
2
5
4.8
11
12
3.1
3
2.9
2.8
2.7
+25C
+85C
-40C
2.6
4
5
6
7
8
9
TUNING VOLTAGE (VOLTS)
10
11 12
13
11 12
13
-6
-7
-8
-9
3
10
-5
-10
2
13
-4
2.4
1
11 12
+25C
+85C
-40C
-3
2.5
0
10
0
1
2
3
4
5
6
7
8
9
TUNING VOLTAGE (VOLTS)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC583LP5 / 583LP5E
v00.0606
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
Vcc(Dig), Vcc(Amp), Vcc(RF)
+5.5 Vdc
Vcc (V)
Icc (mA)
Vtune
0 to +15V
4.75
320
Junction Temperature
135 °C
Continuous Pdiss (T=85 °C)
(derate 43.5 mW/C above 85 °C
2.17 W
Thermal Resistance
(junction to ground paddle)
23 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
5.00
350
5.25
380
Note: VCO will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
VCOS & PLOs - SMT
11
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC583LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC583LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H583
XXXX
[2]
H583
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 209
HMC583LP5 / 583LP5E
v00.0606
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Pin Descriptions
Pin Number
Function
Description
1-3, 5, 8-11,
13-18, 20,
22-28, 30-32
N/C
No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
4
RFOUT/4
Divide-by-4 output.
DC block required.
6
Vcc (Dig)
Supply voltage for prescaler. If prescaler is not
required, this pin may be left open to conserve approximately 65 mA of current.
7
Vcc (Amp)
Supply voltage, for RFOUT/2 output. If RFOUT/2
is not required, this pin may be left open to
conserve approximately 30 mA of current.
12
RFOUT/2
Half frequency output (AC coupled).
19
RF OUT
RF output (AC coupled).
21
Vcc (RF)
Supply Voltage, +5V
29
VTUNE
Control voltage and modulation input. Modulation
bandwidth dependent on drive source impedance. See
“Determining the FM Bandwidth of a Wideband Varactor Tuned VCO” application note.
GND
Package bottom has an exposed metal paddle that
must be connected to RF/DC ground.
Interface Schematic
VCOS & PLOs - SMT
11
11 - 210
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC583LP5 / 583LP5E
v00.0606
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Evaluation PCB
List of Materials for Evaluation PCB 110227 [1]
Item
Description
J1 - J4
PCB Mount SMA RF Connector
J5 - J6
2 mm DC Header
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4
1,000 pF Capacitor, 0402 Pkg.
C5 - C7
2.2 μF Tantalum Capacitor
U1
HMC583LP5 / HMC583LP5E VCO
PCB [2]
110225 Eval Board
[1] Reference this number when ordering complete evaluation PCB
VCOS & PLOs - SMT
11
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and backside ground paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 211
HMC583LP5 / 583LP5E
v00.0606
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Typical Application Circuit
VCOS & PLOs - SMT
11
11 - 212
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC583LP5 / 583LP5E
v00.0606
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Notes:
VCOS & PLOs - SMT
11
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 213
Similar pages