CLV0882E-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Fixed Wireless • Digital Radios • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 822 Typ Max Units 943 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -114 dBc/Hz Harmonic Suppression (2nd) -15 dBc Tuning Voltage 1 9 MHz/V 30 Tuning Sensitivity (avg.) 9 dBm 100 pF Pushing 3 MHz/V Pulling (12 dB Return Loss, Any Phase) 2 MHz 85 °C Max Units Power Output 3 Load Impedance 6 Vdc 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14S Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 22 Vdc 27 mA Additional Notes Phase Noise @ 1 kHz offset (1 Hz BW, typ.): -88dBc/Hz LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CLV0882E-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1040 1020 1000 980 960 940 920 900 880 860 840 820 800 780 760 740 720 700 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 10 9 8 7 6 0.030 MIN. CUTBACK FROM LIVE PADS 5 4 3 2 715 768 807 842 874 905 936 967 998 1026 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B