Vishay MMU01020D5100CB300 Precision melf resistor Datasheet

MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
FEATURES
• Approved according to EN 140401-803
• Advanced thin film technology
• Superior stability: Class 0.05
• Wide precision range: 10 Ω to 1 MΩ
• Force fitted steel caps, tin plated on nickel barrier
• Pure Sn termination on Ni barrier layer
• Compatible with lead (Pb)-free and lead containing
soldering processes
• Lead (Pb)-free and RoHS compliant
APPLICATIONS
MMU 0102, MMA 0204 and MMB 0207 precision thin film
melf resistors combine the proven reliability of the
professional products with an advanced level of precision
and stability. Therefore they are perfectly suited for
applications in the fields of test and measuring equipment
along with industrial and medical electronics.
• Test and measuring equipment
• Industrial and medical electronics
METRIC SIZE
DIN:
CECC:
0102
0204
0207
RC 2211M
RC 3715M
RC 6123M
TECHNICAL SPECIFICATIONS
DESCRIPTION
MMA 0204
MMU 0102
MMB 0207
Metric CECC size
RC 2211 M
RC 3715 M
RC 6123 M
Resistance range
22 Ω to 332 kΩ
10 Ω to 511 kΩ
15 Ω to 1 MΩ
Resistance tolerance
± 0.5 %; ± 0.25 %; ± 0.1 %
Temperature coefficient
Operation mode
Climatic category
(LCT/UCT/days)
Rated dissipation, P701)
precision
standard
precision
standard
precision
standard
10/85/56
55/125/56
10/85/56
55/125/56
10/85/56
55/125/56
0.2 W
0.07 W
0.25 W
0.11 W
0.06 W
Operating voltage, Umax AC/DC
Film temperature
Max. resistance change at P70
for resistance range,
|ΔR/R| max., after:
± 0.25 %; ± 0.1 %
± 25 ppm/K; ± 15 ppm/K
150 V
85 °C
200 V
125 °C
22 Ω to 332 kΩ
85 °C
0.4 W
300 V
125 °C
10 Ω to 511 kΩ
85 °C
125 °C
15 Ω to 1 MΩ
1000 h
≤ 0.05 %
≤ 0.1 %
≤ 0.05 %
≤ 0.1 %
≤ 0.05 %
≤ 0.1 %
8000 h
≤ 0.1 %
≤ 0.2 %
≤ 0.1 %
≤ 0.2 %
≤ 0.1 %
≤ 0.2 %
225 000 h
≤ 0.3 %
≤ 0.6 %
≤ 0.3 %
≤ 0.6 %
≤ 0.3 %
≤ 0.6 %
Permissible voltage against
ambient (insulation):
1 minute, Uins
continuous
Failure rate
200 V
300 V
75 V
75 V
500 V
75 V
≤ 2.0 × 10-9/h
≤ 0.7 × 10-9/h
≤ 0.7 × 10-9/h
Note: These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
1)
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heatflow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded.
www.vishay.com
34
For technical questions contact: [email protected]
Document Number: 28714
Revision: 18-Jul-06
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
12NC INFORMATION
• The resistors have a 12-digit numeric code starting with
2312.
Last Digit of 12NC Indicating Resistance Decade
• The subsequent 4 digits indicate the resistor type,
specification and packaging; see the 12NC table.
• The remaining 4 digits indicate the resistance value:
- The first 3 digits indicate the resistance value.
- The last digit indicates the resistance decade in
accordance with the 12NC Indicating Resistance Decade
table.
RESISTANCE DECADE
LAST DIGIT
10 Ω to 99.9 Ω
9
100 Ω to 999 Ω
1
1 kΩ to 9.99 kΩ
2
10 kΩ to 99.9 kΩ
3
100 kΩ to 999 kΩ
4
1 MΩ to 9.99 MΩ
5
12NC Example
The 12NC of a MMA 0204 resistor, value 47 kΩ and TC 25
with ± 0.1 % tolerance, supplied in blister tape of 3000 units
per reel is: 2312 156 74703.
12NC - resistor type and packaging
ORDERING CODE 2312 ... .....
DESCRIPTION
BLISTER TAPE ON REEL
TYPE
TCR
BULK CASE
TOL.
B1
1000 units
BL
3000 units
B0
10 000 units
M8
8000 units
± 0.25 %
171 6....
166 6....
176 6....
061 6....
± 0.1 %
171 7....
166 7....
176 7....
061 7....
± 0.5 %
172 5....
167 5....
177 5....
062 5....
± 0.25 %
172 6....
167 6....
177 6....
062 6....
± 0.1 %
172 7....
167 7....
177 7....
062 7....
TOL.
B1
1000 units
BL
3000 units
B0
10 000 units
M3
3000 units
± 0.25 %
141 6....
156 6....
146 6....
041 6....
± 0.1 %
141 7....
156 7....
146 7....
041 7....
± 0.5 %
142 5....
157 5....
147 5....
042 5....
± 0.25 %
142 6....
157 6....
147 6....
042 6....
± 0.1 %
142 7....
157 7....
147 7....
042 7....
TOL.
B1
1000 units
B2
2000 units
B7
7000 units
± 0.25 %
181 6....
196 6....
186 6....
± 0.1 %
181 7....
196 7....
186 7....
± 0.1 %
182 7....
197 7....
187 7....
± 25 ppm/K
MMU 0102
± 15 ppm/K
TYPE
TCR
± 25 ppm/K
MMA 0204
± 15 ppm/K
TYPE
TCR
± 25 ppm/K
MMB 0207
± 15 ppm/K
Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.
Document Number: 28714
Revision: 18-Jul-06
For technical questions contact: [email protected]
www.vishay.com
35
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
PART NUMBER AND PRODUCT DESCRIPTION1)
PART NUMBER2): MMA02040D5620BBL00
M
M
A
0
2
0
MODEL/SIZE SPECIAL CHARACTER
0 = neutral, acc. CECC E0
MMU0102
MMA0204
MMB0207
4
0
D
TC
E = ± 15 ppm/K
D = ± 25 ppm/K
5
6
0
2
B
B
L
0
0
VALUE
3 digit value
1 digit multiplier
Multiplier
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
TOLERANCE
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
PACKAGING3) SPECIAL
B1
up to 2 digits
B3
00 = standard
B0
B2
B7
M3
M8
PRODUCT DESCRIPTION: MMA 0204-25 0.1 % BL 562R
MMA
0204
-25
0.1 %
BL
562R
MODEL
SIZE
TCR
TOLERANCE
PACKAGING3)
RESISTANCE VALUE
MMU
MMA
MMB
0102
0204
0207
± 15 ppm/K
± 25 ppm/K
± 0.1 %
± 0.25 %
± 0.5 %
B1
BL
B0
B2
B7
M3
M8
562R = 562 Ω
4K64 = 4.64 kΩ
Notes
1. Products can be ordered using either the PRODUCT DESCRIPTION or the 12NC.
2. The PART NUMBER is shown to facilitate the introduction of the unified part numbering system. Currently, this PART NUMBER is applicable
in the Americas and in Asia/Pacific only.
3. Please refer to table PACKAGING, see below.
PACKAGING
MODEL
MMU 0102
MMA 0204
MMB 0207
www.vishay.com
36
BLISTER TAPE ON REEL
ACC. IEC 60286-3
DIAMETER
PIECES/REEL
CODE
180 mm/7"
1000
B1
180 mm/7"
3000
B3 = BL
330 mm/13"
10 000
B0
180 mm/7"
1000
B1
180 mm/7"
3000
B3 = BL
330 mm/13"
10 000
B0
180 mm/7"
1000
B1
180 mm/7"
2000
B2
330 mm/13"
7000
B7
BULK CASE
ACC. IEC 60286-6
PIECES/BULK CASE
CODE
8000
M8
3000
M3
-
-
For technical questions contact: [email protected]
Document Number: 28714
Revision: 18-Jul-06
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
DIMENSIONS
L
Color code marking
D
1)
D1
K
L1
DIMENSIONS - MELF resistor types, mass and relevant physical dimensions
1)
TYPE
L
(mm)
D
(mm)
L1 min
(mm)
D1
(mm)
K
(mm)
MASS
(mg)
MMU 0102
2.2 + 0/- 0.1
1.1 + 0/- 0.1
1.2
D + 0/- 0.1
0.4 ± 0.05
7
MMA 0204
3.6 + 0/- 0.2
1.4 + 0/- 0.1
1.8
D + 0/- 0.15
0.8 ± 0.1
19
MMB 0207
5.8 + 0/- 0.2
2.2 + 0/- 0.2
2.8
D + 0/- 0.2
1.25 ± 0.15
79
Color code marking is applied according to IEC 60062* in five bands. Each color band appears as a single solid line, voids are permissible if
at least 2/3 of the band is visible from each radial angle of view. The last color band for tolerance is approx, 50 % wider than the other bands.
An interrupted band between the 4rd and 5th full band identifies the temperature coefficient.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
RESISTANCE VALUE1)
DESCRIPTION
TCR
TOLERANCE
MMU 0102
MMA 0204
MMB 0207
± 0.25 %
47 Ω to 332 kΩ
22 Ω to 511 kΩ
15 Ω to 1 MΩ
± 0.1 %
100 Ω to 221 kΩ
43 Ω to 511 kΩ
33 Ω to 1 MΩ
± 0.5 %
22 Ω to 100 kΩ
10 Ω to 332 kΩ
-
± 0.25 %
47 Ω to 100 kΩ
22 Ω to 332 kΩ
-
± 0.1 %
100 Ω to 100 kΩ
43 Ω to 332 kΩ
33 Ω to 1 MΩ
± 25 ppm/K
± 15 ppm/K
Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.
1)
Resistance values to be selected from E24 and E192 series, for other values please contact the factory.
Document Number: 28714
Revision: 18-Jul-06
For technical questions contact: [email protected]
www.vishay.com
37
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
DESCRIPTION
APPROVALS
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade
ceramic body (85 % Al2O3, for MICRO-MELF: 96 % Al2O3)
and conditioned to achieve the desired temperature
coefficient. Nickel plated steel termination caps are firmly
pressed on the metallised rods. A special laser is used to
achieve the target value by smoothly cutting a helical groove
in the resistive layer without damaging the ceramics. A
further conditioning is applied in order to stabilise the
trimming result. The resistor elements are covered by a
protective coating designed for electrical, mechanical and
climatic protection. The terminations receive a final pure tin
on nickel plating. Five color code rings designate the
resistance value and tolerance in accordance with
IEC 60062*.
The resistors are tested in accordance with EN 140401-803
(superseding CECC 40401-803) which refers to
EN 60115-1, EN 140400 and the variety of enviromental test
procedures of the IEC 60068* series. Approval of conformity
is indicated by the CECC logo on the package label.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are laid directly
into the blister tape in accordance with IEC 60 286-3* or bulk
case in accordance with IEC 60286-6*.
Vishay BEYSCHLAG has achieved "Approval of
Manufacturer" in accordance with IEC QC 001002-3,
clause 2. The release certificate for "Technology Approval
Schedule" in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
SPECIALS
On request, resistors are available with established reliability
in accordance with EN 140401-803 Version E. Please refer
to the special data sheet for information on failure rate level,
available resistance ranges and ordering codes.
Note:
* The quoted IEC standards are also released as EN standards with
the same number and identical contents.
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC 61760-1*. Excellent solderability is proven, even after
extended storage in excess of 10 years. The encapsulation
is resistant to all cleaning solvents commonly used in the
electronics industry, including alcohols, esters and aqueous
solutions. The resistors are completely lead (Pb)-free, the
pure tin plating provides compatibility with lead (Pb)-free
soldering processes. The immunity of the plating against tin
whisker growth has been proven under extensive testing.
All products comply with the GADSL1) and the CEFICEECA-EICTA2) list of legal restrictions on hazardous
substances. This includes full compliance with the following
directives:
• 2000/53/EC End of Vehicle life Directive (ELV) and Annex II
(ELV II)
• 2002/95/EC Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
1)
Global Automotive Declarable Substance List, see www.gadsl.org
2)
CEFIC (European Chemical Industry Council), EECA (European
Electronic Component Manufacturers Association), EICTA
(European trade organisation representing the information and
communications technology and consumer electronics), see
www.eicta.org -> issues -> environment policy -> chemicals ->
chemicals for electronics
www.vishay.com
38
For technical questions contact: [email protected]
Document Number: 28714
Revision: 18-Jul-06
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
Power Dissipation P
FUNCTIONAL PERFORMANCE
MMB 0207
MMA 0204
MMU 0102
0.2
W
0.1
0
- 50
0
50
70
100
C
150
Ambient Temperature ϑ amb
Power Dissipation P
Derating - Precision Operation
MMB 0207
MMA 0204
MMU 0102
0.4
W
0.2
0
- 50
0
50
70
100
C
150
Ambient Temperature ϑ amb
Current Noise A1
Derating - Standard Operation
1
µV/V
0.1
MMB 0207
MMA 0204
MMU 0102
0.01
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
Resistance Value R
In accordance with IEC 60195
Current Noise - A1
Document Number: 28714
Revision: 18-Jul-06
For technical questions contact: [email protected]
www.vishay.com
39
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
TESTS AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
EN 60115-1, generic specification
EN 140400, sectional specification
EN 140401-803, detail specification
The components are approved in accordance with the
IECQ-CECC-system, where applicable. For the full test
schedule refer to the documents listed above. The testing
also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
The tests are carried out in accordance with IEC 60068* and
under standard atmospheric conditions in accordance with
IEC 60068-1, 5.3*. Climatic category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days) is valid.
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1 060 mbar).
The components are mounted for testing on printed-circuit
boards in accordance with EN 140400, 2.3.3, unless
otherwise specified.
The requirements stated in Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-803. However, some
additional tests and a number of improvements against those
minimum requirements have been included. The stated
requirements for long-term tests are typically fulfilled with a
statistical safety of at least x + 5 s.
TEST PROCEDURES AND REQUIREMENTS
IEC
EN
60115-1 60068-2*
CLAUSE TEST
METHOD
TEST
stability for product types:
STABILITY
CLASS 0.1
OR BETTER
STABILITY
CLASS 0.25
OR BETTER
MMU 0102
100 Ω to 100 kΩ
43 Ω to 147 kΩ
22 Ω to 332 kΩ
MMA 0204
100 Ω to 100 kΩ
43 Ω to 221 kΩ
10 Ω to 511 kΩ
MMB 0207
100 Ω to 270 kΩ
43 Ω to 510 kΩ
15 Ω to 1 MΩ
-
resistance
-
4.8.4.2
-
temperature
coefficient
at 20 / - 55 / 20 °C and
20 / 125 / 20 °C
endurance at
70 °C: precision
operation mode
U=
-
endurance at
70 °C: standard
operation mode
4.25.3
4.24
4.39
-
78 (Cab)
67 (Cy)
endurance at
upper category
damp heat,
steady state
damp heat,
steady state,
accelerated
PERMISSIBLE CHANGE (ΔR)
STABILITY
CLASS 0.05
OR BETTER
4.5
4.25.1
REQUIREMENTS
PROCEDURE
± 0.5 % R; ± 0.25 % R; ± 0.1 % R
± 25 ppm/K, ± 15 ppm/K
P 70 × R
≤ Umax;
1.5 h on; 0.5 h off;
70 °C; 1000 h
± (0.05 % R + 5 mΩ)
70 °C; 8000 h
± (0.1 % R + 5 mΩ)
U=
P 70 × R
≤ Umax;
1.5 h on; 0.5 h off;
70 °C; 1000 h
± (0.1 % R + 5 mΩ)
70 °C; 8000 h
± (0.2 % R + 5 mΩ)
85 °C; 1000 h
± (0.02 % R + 5 mΩ)
± (0.05 % R + 5 mΩ)
± (0.1 % R + 5 mΩ)
125 °C; 1000 h
± (0.05 % R + 5 mΩ)
± (0.1 % R + 5 mΩ)
± (0.15 % R + 5 mΩ)
(40 ± 2) °C; 56 days;
± (0.05 % R + 5 mΩ)
± (0.1 % R + 5 mΩ)
± (0.15 % R + 5 mΩ)
± (0.25 % R + 5 mΩ)
(93 ± 3) % RH
(85 ± 2) °C; (85 ± 5) % RH;
U = 0.1 × P 70 × R
≤ 100 V;
1000 h
www.vishay.com
40
For technical questions contact: [email protected]
Document Number: 28714
Revision: 18-Jul-06
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
TEST PROCEDURES AND REQUIREMENTS
IEC
EN
60115-1 60068-2*
TEST
CLAUSE
METHOD
TEST
stability for product types:
4.23
REQUIREMENTS
PROCEDURE
PERMISSIBLE CHANGE (ΔR)
STABILITY
CLASS 0.05
OR BETTER
STABILITY
CLASS 0.1
OR BETTER
STABILITY
CLASS 0.25
OR BETTER
MMU 0102
100 Ω to 100 kΩ
43 Ω to 147 kΩ
22 Ω to 332 kΩ
MMA 0204
100 Ω to 100 kΩ
43 Ω to 221 kΩ
10 Ω to 511 kΩ
MMB 0207
100 Ω to 270 kΩ
43 Ω to 510 kΩ
15 Ω to 1 MΩ
LCT = - 10 °C; UCT = 85 °C
± (0.05 % R + 5 mΩ)
± (0.1 % R + 5 mΩ)
-
LCT = - 55 °C; UCT = 125 °C
-
-
± (0.1 % R + 5 mΩ)
climatic
4.23.2
2 (Ba)
dry heat
UCT; 16 h
4.23.3
30 (Db)
damp heat,
cyclic
55 °C; 24 h; ≥ 90 % RH;
1 cycle
4.23.4
1 (Aa)
cold
LCT; 2 h
4.23.5
13 (M)
low air pressure
8.5 kPa; 2 h; (25 ± 10) °C
4.23.6
30 (Db)
damp heat,
cyclic
55 °C; 24 h; ≥ 90 % RH;
5 cycles
4.23.7
-
d.c. load
U=
P 70 × R ≤ Umax; 1 min.
-
1 (Aa)
cold
- 55 °C; 2 h
4.19
14 (Na)
rapid change of
temperature
30 minutes at LCT;
30 minutes at UCT;
LCT = - 10 °C; UCT = 85 °C
± (0.02 % R + 5 mΩ)
5 cycles
± (0.01 % R + 5 mΩ)
± (0.02 % R + 5 mΩ)
-
1000 cycles
± (0.1 % R + 5 mΩ)
± (0.1 % R + 5 mΩ)
-
5 cycles
-
-
± (0.025 % R + 5 mΩ)
1000 cycles
-
-
± (0.2 % R + 5 mΩ)
± (0.01 % R + 5 mΩ)
± (0.02 % R + 5 mΩ)
± (0.03 % R + 5 mΩ)
LCT = - 55 °C; UCT = 125 °C
4.13
4.27
4.37
4.22
-
-
-
6 (Fc)
short time overload; precision
operation mode
U = 2.5 × P 70 × R
short time overload; standard
operation mode
≤ 2 × Umax; 5 s
± (0.05 % R + 5 mΩ)
single pulse high
voltage overload;
standard
operation mode
severity no. 4:
± (0.25 % R + 5 mΩ)1)
periodic electric
overload;
standard
operation mode
vibration
Document Number: 28714
Revision: 18-Jul-06
U = 10 × P 70 × R
≤ 2 × Umax;
10 pulses 10 μs/700 μs
U = 15 × P × R
70
≤ 2 × Umax;
± (0.5 % R + 5 mΩ)1)
0.1 s on; 2.5 s off;
1000 cycles
endurance by sweeping;
10 to 2000 Hz; no
resonance; amplitude
≤ 1.5 mm or ≤ 200 m/s2; 6 h
± (0.01 % R + 5 mΩ)
± (0.02 % R + 5 mΩ)
For technical questions contact: [email protected]
± (0.03 % R + 5 mΩ)
www.vishay.com
41
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
TEST PROCEDURES AND REQUIREMENTS
IEC
EN
60115-1 60068-2*
CLAUSE TEST
METHOD
TEST
REQUIREMENTS
PROCEDURE
stability for product types:
PERMISSIBLE CHANGE (ΔR)
STABILITY
CLASS 0.05
OR BETTER
STABILITY
CLASS 0.1
OR BETTER
STABILITY
CLASS 0.25
OR BETTER
MMU 0102
100 Ω to 100 kΩ
43 Ω to 147 kΩ
22 Ω to 332 kΩ
MMA 0204
100 Ω to 100 kΩ
43 Ω to 221 kΩ
10 Ω to 511 kΩ
MMB 0207
100 Ω to 270 kΩ
43 Ω to 510 kΩ
15 Ω to 1 MΩ
4.40
-
electrostatic
discharge
(Human Body
Model)
IEC 61340-3-1*;
3 pos. + 3 neg. discharges
MMU 0102: 1.5 kV
MMA 0204: 2 kV
MMB 0207: 4 kV
4.17.2
58 (Td)
solderability
solder bath method;
SnPb40; non-activated flux;
(215 ± 3) °C; (3 ± 0.3) s
good tinning (≥ 95 % covered); no visible damage
solder bath method;
SnAg3Cu0,5 or SnAg3,5;
non-activated flux;
(235 ± 3) °C; (2 ± 0.2) s
good tinning (≥ 95 % covered); no visible damage
4.18.2
58 (TD)
resistance to
soldering heat
solder bath method;
(260 ± 5) °C; (10 ± 1) s
reflow method 2
(IR/forced gas convection);
(260 ± 5) °C; (10 ± 1) s
± (0.5 % R + 50
mΩ)1)
note 2
± (0.05 % R + 10 mΩ)
± (0.01 % R + 5 mΩ)
± (0.025 % R + 5 mΩ)
4.29
45 (XA)
component
solvent
resistance
isopropyl alcohol; 50 °C;
method 2
no visible damage
4.30
45 (XA)
solvent
resistance of
marking
isopropyl alcohol; 50 °C;
method 1, toothbrush
marking legible; no visible damage
4.32
21 (Ue3)
shear (adhesion)
45 N
4.33
21 (Ue1)
substrate
bending
depth 2 mm, 3 times
no visible damage
no visible damage, no open circuit in bent position
± (0.02 % R + 10 mΩ)3)
4.7
-
voltage proof
Urms = Uins; 60 s
4.35
-
flammability
IEC 60 695-11-5*, needle
flame test; 10 s
± (0.05 % R + 10 mΩ)3)
no flashover or breakdown
no burning after 30 s
Notes
1. The pulse load stability of professional MELF resistors applies for precision resistors also. However, severe pulse loads are likely to
jeopardize precision stability requirements.
2. Wave soldering is not recommended.
3. Special requirements apply to MICRO-MELF, MMU 0102:
- R < 100 Ω: ± (0.15 % R + 10 mΩ)
- 100 Ω ≤ R ≤ 10 kΩ: ± 0.1 % R
- R > 10 kΩ: ± 0.05 % R
* The quoted IEC standards are also released as EN standards with the same number and identical contents.
www.vishay.com
42
For technical questions contact: [email protected]
Document Number: 28714
Revision: 18-Jul-06
MMU 0102, MMA 0204, MMB 0207 - Precision
Precision MELF Resistors
Vishay Beyschlag
REVISION HISTORY
Compared to the prior revision of this datasheet, 26-Feb-04, the following changes have been applied:
• Introduction of a standardized part numbering system
• Additional emphasis on the clean balance of materials and on the compliance with various EU directives.
• Revision of the current noise diagram based on new test results
• Introduction of a test and requirements for electrostatic discharge (ESD)
• No other change of technical contents
• No product change
Document Number: 28714
Revision: 18-Jul-06
For technical questions contact: [email protected]
www.vishay.com
43
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages