ON NTA4153N Small signal mosfet Datasheet

NTA4153N, NTE4153N,
NVA4153N, NVE4153N
Small Signal MOSFET
20 V, 915 mA, Single N−Channel
with ESD Protection, SC−75 and SC−89
http://onsemi.com
Features
•
•
•
•
•
Low RDS(on) Improving System Efficiency
Low Threshold Voltage, 1.5 V Rated
ESD Protected Gate
NV Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
Pb−Free Packages are Available
V(BR)DSS
RDS(on) TYP
ID MAX
0.127 W @ 4.5 V
0.170 W @ 2.5 V
20 V
915 mA
0.242 W @ 1.8 V
0.500 W @ 1.5 V
3
N−Channel MOSFET
Applications
•
•
•
•
Load/Power Switches
Power Supply Converter Circuits
Battery Management
Portables like Cell Phones, PDAs, Digital Cameras, Pagers, etc.
1
2
MAXIMUM RATINGS (TJ = 25°C unless otherwise stated)
Symbol
Value
Units
Drain−to−Source Voltage
VDSS
20
V
Gate−to−Source Voltage
VGS
±6.0
V
ID
915
mA
Parameter
Continuous Drain
Current (Note 1)
Steady
State
Power Dissipation
(Note 1)
Pulsed Drain Current
TA = 25°C
TA = 85°C
Steady State
tp =10 ms
3
1
SC−75 / SOT−416
CASE 463
2
STYLE 5
660
PD
300
mW
IDM
1.3
A
TJ,
TSTG
−55 to
150
°C
Continuous Source Current (Body Diode)
IS
280
mA
Lead Temperature for Soldering Purposes
(1/8” from case for 10 s)
TL
260
°C
Operating Junction and Storage Temperature
MARKING DIAGRAM &
PIN ASSIGNMENT
3
SC−89
CASE 463C
2
1
3
Drain
XX MG
G
1
Gate
2
Source
XX
= Device Code
M
= Date Code*
G
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary depending
upon manufacturing location.
SC−75, SC−89
THERMAL RESISTANCE RATINGS
Parameter
Symbol
Junction−to−Ambient − Steady State (Note 1)
SC−75 / SOT−416
SC−89
RqJA
Value
Units
°C/W
Gate
1
416
400
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Surface mounted on FR4 board using 1 in sq pad size
(Cu area = 1.127 in sq [1 oz] including traces).
3
Source
Drain
2
Top View
ORDERING INFORMATION
See detailed ordering and shipping information on page 4 of
this data sheet.
© Semiconductor Components Industries, LLC, 2014
December, 2014 − Rev. 7
1
Publication Order Number:
NTA4153N/D
NTA4153N, NTE4153N, NVA4153N, NVE4153N
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise stated)
Symbol
Test Condition
Min
Typ
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
20
26
V
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/TJ
18.4
mV/°C
Parameter
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
IDSS
VGS = 0 V, VDS = 16 V
100
nA
Gate−to−Source Leakage Current
IGSS
VDS = 0 V, VGS = ±4.5 V
±1.0
mA
VGS(TH)
VGS = VDS, ID = 250 mA
1.1
V
ON CHARACTERISTICS (Note 2)
Gate Threshold Voltage
Negative Threshold Temperature
Coefficient
VGS(TH)/TJ
Drain−to−Source On Resistance
RDS(on)
Forward Transconductance
gFS
0.45
0.76
−2.15
mV/°C
VGS = 4.5 V, ID = 600 mA
127
230
VGS = 2.5 V, ID = 500 mA
170
275
VGS = 1.8 V, ID = 350 mA
242
700
VGS = 1.5 V, ID = 40 mA
500
950
VDS = 10 V, ID = 400 mA
1.4
S
110
pF
mW
CHARGES AND CAPACITANCES
CISS
Input Capacitance
VGS = 0 V, f = 1.0 MHz,
VDS = 16 V
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
12
Total Gate Charge
QG(TOT)
1.82
Threshold Gate Charge
QG(TH)
0.2
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
0.42
td(ON)
3.7
VGS = 4.5 V, VDS = 10 V,
ID = 0.2 A
16
nC
0.3
SWITCHING CHARACTERISTICS (Note 3)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
tr
td(OFF)
VGS = 4.5 V, VDD = 10 V,
ID = 0.2 A, RG = 10 W
tf
ns
4.4
25
7.6
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
VSD
VGS = 0 V,
IS = 200 mA
TJ = 25°C
0.67
TJ = 125°C
0.54
1.1
V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%.
3. Switching characteristics are independent of operating junction temperatures.
http://onsemi.com
2
NTA4153N, NTE4153N, NVA4153N, NVE4153N
TYPICAL ELECTRICAL CHARACTERISTICS
1.2
1.2
VDS w 10 V
1.0
ID, DRAIN CURRENT (AMPS)
ID, DRAIN CURRENT (AMPS)
2.0 V
VGS = 2.6 V to 5.0 V
0.8
1.8 V
0.6
0.4
1.6 V
0.2
1.0
0.8
0.6
0.4
0.2
TJ = −55°C
1.4 V
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0
4.0
0.4
1.6
Figure 2. Transfer Characteristics
0.3
0.2
TJ = 125°C
TJ = 25°C
0.1
TJ = −55°C
0.1
0.2
0.3
0.4
0.5
0.6
0.7
2.0
0.4
VGS = 2.5 V
0.3
TJ = 125°C
0.2
TJ = 25°C
TJ = −55°C
0.1
0
0
0.1
0.2
ID, DRAIN CURRENT (AMPS)
0.3
0.4
0.5
0.6
0.7
ID, DRAIN CURRENT (AMPS)
Figure 4. On−Resistance vs. Drain Current and
Temperature
Figure 3. On−Resistance vs. Drain Current and
Temperature
1.6
200
ID = 0.35 A
VGS = 4.5 V
TJ = 25°C
VGS = 0 V
C, CAPACITANCE (pF)
RDS(on), DRAIN−TO−SOURCE
RESISTANCE (NORMALIZED)
1.2
Figure 1. On−Region Characteristics
VGS = 4.5 V
1.4
0.8
VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
0.4
0
0
0
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
0
TJ = 25°C
TJ = 125°C
1.2
1.0
0.8
0.6
−50
160
CISS
120
80
COSS
40
−25
0
25
50
75
100
125
150
0
CRSS
0
TJ, JUNCTION TEMPERATURE (°C)
4
8
12
16
DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Capacitance Variation
http://onsemi.com
3
20
NTA4153N, NTE4153N, NVA4153N, NVE4153N
0.6
5
QT
IS, SOURCE CURRENT (AMPS)
VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS
4
3
QGS
2
QGD
ID = 0.2 A
TA = 25°C
1
VGS = 0 V
0.5
0.4
0.3
TJ = 125°C
0.2
0.1
TJ = 25°C
0
0
0
0.4
0.8
1.2
1.6
QG, TOTAL GATE CHARGE (nC)
2.0
0
0.4
0.6
0.8
VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS)
Figure 8. Diode Forward Voltage vs. Current
Figure 7. Gate−to−Source Voltage vs. Total
Gate Charge
r(t), NORMALIZED TRANSIENT THERMAL RESISTANCE
0.2
1.0
D = 0.5
0.1
0.2
0.1
0.05
0.02
0.01
0.01
SINGLE PULSE
0.001
0.00001
0.0001
0.001
0.01
0.1
t, TIME (s)
1.0
10
100
1000
Figure 9. Normalized Thermal Response
ORDERING INFORMATION
Marking
Package
Shipping†
NTA4153NT1
TR
SC−75 / SOT−416
3000 / Tape & Reel
NTA4153NT1G
TR
SC−75 / SOT−416
(Pb−Free)
3000 / Tape & Reel
NTE4153NT1G
TP
SC−89
(Pb−Free)
3000 / Tape & Reel
NVA4153NT1G
VR
SC−75 / SOT−416
(Pb−Free)
3000 / Tape & Reel
NVE4153NT1G
VP
SC−89
(Pb−Free)
3000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
4
NTA4153N, NTE4153N, NVA4153N, NVE4153N
PACKAGE DIMENSIONS
SC−75/SOT−416
CASE 463
ISSUE F
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
−E−
2
3
b 3 PL
0.20 (0.008)
e
DIM
A
A1
b
C
D
E
e
L
HE
−D−
1
M
D
HE
C
0.20 (0.008) E
STYLE 5:
PIN 1. GATE
2. SOURCE
3. DRAIN
A
L
MILLIMETERS
MIN
NOM MAX
0.70
0.80
0.90
0.00
0.05
0.10
0.15
0.20
0.30
0.10
0.15
0.25
1.55
1.60
1.65
0.70
0.80
0.90
1.00 BSC
0.10
0.15
0.20
1.50
1.60
1.70
A1
SOLDERING FOOTPRINT*
0.356
0.014
1.803
0.071
0.787
0.031
0.508
0.020
1.000
0.039
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
5
INCHES
NOM MAX
0.031 0.035
0.002 0.004
0.008 0.012
0.006 0.010
0.063 0.067
0.031 0.035
0.04 BSC
0.004 0.006 0.008
0.061 0.063 0.065
MIN
0.027
0.000
0.006
0.004
0.059
0.027
NTA4153N, NTE4153N, NVA4153N, NVE4153N
PACKAGE DIMENSIONS
SC−89
CASE 463C−03
ISSUE C
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD
FINISH THICKNESS. MINIMUM LEAD THICKNESS
IS THE MINIMUM THICKNESS OF BASE
MATERIAL.
4. 463C−01 OBSOLETE, NEW STANDARD 463C−02.
A
−X−
3
1
2
B −Y− S
K
DIM
A
B
C
D
G
H
J
K
L
M
N
S
G
2 PL
D
0.08 (0.003)
M
3 PL
X Y
N
M
C
J
−T−
MILLIMETERS
MIN
NOM MAX
1.50
1.60
1.70
0.75
0.85
0.95
0.60
0.70
0.80
0.23
0.28
0.33
0.50 BSC
0.53 REF
0.10
0.15
0.20
0.30
0.40
0.50
1.10 REF
−−−
−−−
10 _
−−−
−−−
10 _
1.50
1.60
1.70
INCHES
NOM MAX
0.063 0.067
0.034 0.040
0.028 0.031
0.011 0.013
0.020 BSC
0.021 REF
0.004 0.006 0.008
0.012 0.016 0.020
0.043 REF
−−−
−−−
10 _
−−−
−−−
10 _
0.059 0.063 0.067
MIN
0.059
0.030
0.024
0.009
SEATING
PLANE
SOLDERING FOOTPRINT*
0.53
0.020
1.10
0.043
0.53
0.020
1.00
0.039
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTA4153N/D
Similar pages