PNP − MJ15023, MJ15025* *MJ15025 is a Preferred Device Silicon Power Transistors The MJ15023 and MJ15025 are PowerBase power transistors designed for high power audio, disk head positioners and other linear applications. Features http://onsemi.com • High Safe Operating Area (100% Tested) −2 A @ 80 V • High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc • Pb−Free Packages are Available* 16 AMPERES SILICON POWER TRANSISTORS 200 − 250 VOLTS, 250 WATTS MAXIMUM RATINGS Rating Symbol Collector−Emitter Voltage Value Unit VCEO MJ15023 MJ15025 Collector−Base Voltage Vdc 200 250 VCBO MJ15023 MJ15025 Vdc 350 400 Emitter−Base Voltage VEBO 5 Vdc Collector−Emitter Voltage VCEX 400 Vdc IC 16 30 Adc Base Current − Continuous IB 5 Adc Total Device Dissipation @ TC = 25_C Derate above 25_C PD 250 1.43 W W/_C TJ, Tstg −65 to +200 _C Collector Current − Continuous − Peak (Note 1) Operating and Storage Junction Temperature Range TO−204AA (TO−3) CASE 1−07 STYLE 1 MARKING DIAGRAM MJ1502xG AYWW MEX THERMAL CHARACTERISTICS Characteristics Symbol Max Unit Thermal Resistance, Junction−to−Case RqJC 0.70 _C/W Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Pulse Test: Pulse Width = 5 ms, Duty Cycle v 10%. MJ1502x = Device Code x = 3 or 5 G = Pb−Free Package A = Assembly Location Y = Year WW = Work Week MEX = Country of Origin ORDERING INFORMATION Device Package Shipping MJ15023 TO−204 100 Units / Tray TO−204 (Pb−Free) 100 Units / Tray TO−204 100 Units / Tray TO−204 (Pb−Free) 100 Units / Tray MJ15023G MJ15025 MJ15025G *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 February, 2006 − Rev. 10 1 Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MJ15023/D PNP − MJ15023, MJ15025* ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) Characteristic Symbol Min Max 200 250 − − − − 250 250 − − 500 500 − 500 5 2 − − 15 5 60 − − − 1.4 4.0 Unit OFF CHARACTERISTICS Collector−Emitter Sustaining Voltage (Note 2) (IC = 100 mAdc, IB = 0) VCEO(sus) MJ15023 MJ15025 Collector Cutoff Current (VCE = 200 Vdc, VBE(off) = 1.5 Vdc) (VCE = 250 Vdc, VBE(off) = 1.5 Vdc) MJ15023 MJ15025 Collector Cutoff Current (VCE = 150 Vdc, IB = 0) (VCE = 200 Vdc, IB = 0) MJ15023 MJ15025 Emitter Cutoff Current (VCE = 5 Vdc, IB = 0) Both − mAdc ICEX mAdc ICEO IEBO mAdc SECOND BREAKDOWN Second Breakdown Collector Current with Base Forward Biased (VCE = 50 Vdc, t = 0.5 s (non−repetitive)) (VCE = 80 Vdc, t = 0.5 s (non−repetitive)) IS/b Adc ON CHARACTERISTICS DC Current Gain (IC = 8 Adc, VCE = 4 Vdc) (IC = 16 Adc, VCE = 4 Vdc) hFE − Collector−Emitter Saturation Voltage (IC = 8 Adc, IB = 0.8 Adc) (IC = 16 Adc, IB = 3.2 Adc) VCE(sat) Vdc Base−Emitter On Voltage (IC = 8 Adc, VCE = 4 Vdc) VBE(on) − 2.2 Vdc fT 4 − MHz Cob − 600 pF DYNAMIC CHARACTERISTICS Current−Gain − Bandwidth Product (IC = 1 Adc, VCE = 10 Vdc, ftest = 1 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, ftest = 1 MHz) 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2%. 100 50 There are two limitations on the powerhandling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC − VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 1 is based on TJ(pk) = 200_C; TC is variable depending on conditions. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. IC, COLLECTOR CURRENT (AMPS) TC = 25°C 20 10 5.0 1.0 BONDING WIRE LIMITED THERMAL LIMITATION (SINGLE PULSE) SECOND BREAKDOWN LIMITED 0.2 0.1 0.1 0.2 20 0.5 10 50 100 250 500 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) 1k Figure 1. Active−Region Safe Operating Area http://onsemi.com 2 PNP − MJ15023, MJ15025* 4000 3000 f T, CURRENT−GAIN BANDWIDTH PRODUCT (MHz) TYPICAL CHARACTERISTICS Cib C, CAPACITANCE (pF) TJ = 25°C 1000 500 Cob 100 0.3 0.5 1.0 5.0 10 30 50 100 300 TJ = 25°C VCE = 10 V fTest = 1 MHz 9 8 7 6 5 4 3 2 1 0 0.1 2.0 0.3 0.5 1.0 IC, COLLECTOR CURRENT (AMPS) VR, REVERSE VOLTAGE (VOLTS) 5.0 10 Figure 3. Current−Gain — Bandwidth Product Figure 2. Capacitances 200 TJ = 100°C VCE = 4.0 V 1.8 TJ = 25°C 50 V, VOLTAGE (VOLTS) hFE, DC CURRENT GAIN 100 20 10 1.4 1.0 TJ = 25°C 0.8 5.0 100°C 0.2 2.0 0.2 0.5 1.0 2.0 5.0 IC, COLLECTOR CURRENT (AMPS) 10 0 20 Figure 4. DC Current Gain 0.1 VBE(on) @ VCE = 4.0 V 25°C VCE(sat) @ IC/IB = 10 0.5 1.0 2.0 IC, COLLECTOR CURRENT (AMPS) Figure 5. “On” Voltages http://onsemi.com 3 100°C 5.0 10 PNP − MJ15023, MJ15025* PACKAGE DIMENSIONS TO−204 (TO−3) CASE 1−07 ISSUE Z NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH REFERENCED TO−204AA OUTLINE SHALL APPLY. A N C −T− E D K 2 PL 0.13 (0.005) U T Q M M Y DIM A B C D E G H K L N Q U V M −Y− L V SEATING PLANE 2 H G B M T Y 1 −Q− 0.13 (0.005) M INCHES MIN MAX 1.550 REF −−− 1.050 0.250 0.335 0.038 0.043 0.055 0.070 0.430 BSC 0.215 BSC 0.440 0.480 0.665 BSC −−− 0.830 0.151 0.165 1.187 BSC 0.131 0.188 MILLIMETERS MIN MAX 39.37 REF −−− 26.67 6.35 8.51 0.97 1.09 1.40 1.77 10.92 BSC 5.46 BSC 11.18 12.19 16.89 BSC −−− 21.08 3.84 4.19 30.15 BSC 3.33 4.77 STYLE 1: PIN 1. BASE 2. EMITTER CASE: COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. MJ15023/D