Fujitsu FTR-LYAA005Y Power relay 1 pole - 6a (medium load control) slim type Datasheet

FTR-LY SERIES
POWER RELAY
1 POLE - 6A (Medium Load Control)
SLIM TYPE
FTR-LY Series
RoHS compliant
n FEATURES
l
l
l
l
l
l
l
l
Slim(15.0mm(h) x 5.0 mm(w) x 28.0mm (l)
Mounting space: 140mm2, weight: 5.0g
High insulation in small package (between coil and contacts)
- Insulation Distance: 8mm min.)
- Dielectric strength: 4,000 VAC
- Surge strength: 6,000V
Plastic materials
- UL94 flame class V-0
- CTI>250 (UL CTI level class 2)
UL, CSA, VDE, SEMKO under approval
- UL:
conforms to UL508, 1604
- CSA:
conforms to CSA22.2 No.14
- SEMKO:
conforms to EN61058-1, 61095
- VDE:
conforms to VDE 0435, 0631, 0700
Contains no lead and features cadmium-free contacts
Socket type available
RoHS Compliant since production
n ORDERING INFORMATION
[Example]
FTR-LY
(a)
A
(b)
A
(c)
005
(d)
Y
(e)
SK
(f)
(a)
Series Name
FTR-LY : FTR-LY Series
(b)
Contact Arrangement
A
C
: 1 form A
: 1 form C
(c)
Coil Type / Enclosure
A
: Standard / Plastic sealed
(d)
Nominal Voltage
012
005
: 5 VDC, 006 : 6VDC,
: 12VDC, 024 : 24VDC,
048 : 48VDC
(e)
Contact Material
Y
V
: Silver alloy
: Gold plated silver alloy
(f)
Socket Type
NIL
SK
: PCB mounting type
: Socket mounting type (contact arrangement A&C only)
P: 1 form A (Right Angle Type)
R: 1 form C (Right Angle Type)
Actual marking does not carry the type name : "FTR" and "SK"
E.g.: Ordering code: FTR-LYAA012Y
Actual marking: LYAA012Y
FTR-LY SERIES
n SPECIFICATIONS
It em
Contact
FTR-LY
Arrangemen t
1 form C
Material
Gold plated silver alloy, silver alloy
Style
Singl e
Resistance (initial)
Maximum 100m ohm s
Rating
6A 250VAC or 6A 30VD C
Maximum Carrying Current
6A
Maximum Switching Power
1,500VA
Maximum Switching Voltage
250VAC
Minimum Switching Load*
10mA 5VDC
Maximum Switching Current
6A
Operating Temperature
-40° C to +85° C (no frost )
Rating Power
170m W
Must operate power
75mW
Max. allowable voltage
150% of nominal voltage (at 20 deg.)
Operate Time (without diode)
Maximum 8m s (at nominal voltage, no bounce)
Release Time (without diode)
Maximum 4m s (at nominal voltage, no bounce)
Resistance (at 500VDC )
Minimum 1,000 Mohm s
1
Coil
Time Value
Insulation
Dielectric
Strength
Life
1,000 VAC 1 minute
Between coil and
4,000 VAC 1 minute
contacts
Surge Strength
6,000V (at 1.2 x 50 micro sec. )
Mechanical
10 x 106 operations minimum
Electrical
Other
Between open
contacts
1 form A
60 x103 ops. min. (N.O.)
AC contact ratin g 30 x103 ops. min. (N.C.)
at 6A 250VAC/30VDC
Vibration
Resistance
Misoperation
10 to 55 Hz, at double amplitude of 1.0mm
Endurance
10-55 Hz, at double amplitude of 1.5m m
Shock
Resistance
Misoperation
Min. 50m/s2 (11±1ms)
Endurance
Min. 1,000m/ s2 (6±1ms)
Weight
Min. 100m/ s2 (11±1ms)
Approximately 4 g
FTR-LY SERIES
n COIL DATA CHART
Co i l
No m i n al
Res i s t an c e
Vo l t ag e
(± 10%)
Mo d el
1 form A type
1 form C typ e
FTR-LYAA005Y(-SK) FTR-LYCA005Y(-SK )
FTR-LYAA006Y(-SK) FTR-LYCA006Y(-SK )
5VD C
6VD C
FTR-LYAA012Y(-SK) FTR-LYCA012Y(-SK ) 12VD C
FTR-LYAA024Y(-SK) FTR-LYCA024Y(-SK ) 24VD C
FTR-LYAA048Y(-SK) FTR-LYCA048Y(-SK ) 48VD C
FTR-LYPA005Y
FTR-LYRA005 Y
5VD C
FTR-LYPA006Y
FTR-LYRA006 Y
6VD C
FTR-LYPA012Y
FTR-LYPA024Y
FTR-LYPA048Y
FTR-LYRA012 Y
FTR-LYRA024 Y
FTR-LYRA048 Y
12VD C
24VD C
48VD C
Mu s t
Operate
Vo l t ag e
Mu s t
Release
Vo l t ag e
No m i n al
P o w er
14 7 Ω
21 2 Ω
3.3VDC
4.0VDC
0.25VD C
0.3VD C
170m W
170m W
84 7 Ω
3,38 8 Ω
10,60 0 Ω
14 7 Ω
21 2 Ω
8.0VDC
15.9VDC
31.7VDC
3.3VDC
4.0VDC
0.6VD C
1.2VD C
2.4VD C
0.25VD C
0.3VD C
170m W
170m W
217m W
170m W
170m W
84 7 Ω
3,38 8 Ω
10,60 0 Ω
8.0VDC
15.9VDC
31.7VDC
0.6VD C
1.2VD C
2.4VD C
170m W
170m W
217m W
Note: All values in the table are measured at 20˚C.
n DIMENSIONS
3.5
0.5
15 max.
Thru hole type
1
0.5
(0.7)
1
1
0.5
3.78
Pre-soldering
5.04
5.04
(1.2)
16.38
5 max.
28 max.
Drilling Plan (BOTTOM VIEW)
Wiring Diagram (BOTTOM VIEW)
(0.7)
3.78±0.1
3-O1.3±0.1
(4.9)
(*1)
5.04±0.1 5.04±0.1
(1.2)
2-O1±0.1
16.38±0.1
(27.8)
*1: This terminal is not applicable for 1 form A type
Unit: mm
FTR-LY SERIES
n DIMENSIONS
Right Angle type
3
15.5
15 max.
0.5
1
0.5
(0.7)
3.78
1
Pre-soldering
1
5.04
5.04
16.38±0.1
28 max.
Drilling Plan
(Bottom view)
(X 1)
Wiring Diagram
(Bottom view)
(0.7)
3.78±0.1
5.04±0.1 5.04±0.1
16.38±0.1
(27.8)
(4.9)
3-O1.3±0.1
(1.2)
2-O1±0.1
(X 1)
(X 1): this terminal is not applicable for 1 form A type
Unit: mm
FTR-LY SERIES
n DIMENSIONS
Socket type
Coil Voltage
(example)
0.4
2-R0.7
2
1.2
F&T LYCA024V
24V
3
DC
0320
û
3.5
0.7
0.5
60
6.3 max.
15 max.
2-R0.8
2-R0.3
Type Name
(example)
1
0.5
(0.7)
1
1
0.5
Country Name
Date Code
(example)
Schematics (BOTTOM VIEW)
PC Board Mounting Hole Layout (BOTTOM VIEW)
(1.2)
5.04±0.1 5.04±0.1
(0.7)
3.7±0.1
(4.9)
3O1.3±0.1
2O1±0.1
16.38±0.1
(27.8)
(30.6)
Unit: mm
Notes: 1. Socket ordering code
2. Standard IC socket is not recommended. Please use JM-6N
FTR-LY SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l
All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
l
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l
We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condtion
Flow Solder condtion:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
FTR-LY SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: http://www.fujitsu.com/emea/services/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products
Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 02/08/2006.
Similar pages