SUPER BRIGHT AllnGaP T-1 3/4 (5 mm) LOW CURRENT LED LAMP - Tinted & Diffused PACKAGE DIMENSIONS SUPER RED SUPER YELLOW HLMP-4700L HLMP-4719L .200 (5.08) .180 (4.57) FEATURES .350 (8.89) .330 (8.38) • Popular T-1 3/4 package with 100 .040 (1.02) mil. lead spacing 1.00 (25.4) MIN .050 (1.27) REF • Super high brightness at low current (2 mA) .050 (1.27) .100 (2.54) • Solid state reliability • Tinted and diffused .100 (2.54) REF .230 (5.84) • CMOS and TTL compatible FLAT DENOTES CATHODE .023 (.58) .017 (.43) SQ TYP (2X) DESCRIPTION These T-1 3/4 super bright low current lamps have a moderate viewing angle of 35°. The HLMP-47XXL series is made with an AllnGaP LED, which delivers performance, reliability and brightness superior to that of standard products. NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Lead spacing is measured where the leads emerge from the package. 3. Protruded resin under the flange is 1.5 mm (0.059") max. ABSOLUTE MAXIMUM RATINGS Parameter (TA = 25°C unless otherwise specified) Symbol Rating Unit Operating Temperature TOPR -55 to +100 °C Storage Temperature TSTG -55 to +100 °C Lead Soldering Time TSOL 260 for 5 sec °C IF 7.5 mA IF 150 mA Reverse Voltage VR 5 V Power Dissipation PD 25 mW Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) 1 of 4 11/17/99 300003A SUPER BRIGHT AllnGaP T-1 3/4 (5 mm) LOW CURRENT LED LAMP - Tinted & Diffused SUPER RED SUPER YELLOW ELECTRICAL / OPTICAL CHARACTERISTICS Part Number HLMP-4700L HLMP-4719L (TA =25°C) HLMP-4700L HLMP-4719L Minimum 5 6 Typical 8 10 Condition Luminous Intensity (mcd) IF = 2 mA Forward Voltage (V) IF = 2 mA Maximum 2.4 2.4 Typical 2.0 2.0 Peak 640 590 Dominant Wavelength (nm) IF = 2 mA 631 589 Spectral Line Half Width (nm) 20 15 IF = 2 mA Viewing Angle (°) 35 35 IF = 2 mA TYPICAL PERFORMANCE CURVES 10 10.0 8 HLMP-4700L RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 2 mA) IF - FORWARD CURRENT (mA) 9 7 6 HLMP-4719L 5 4 3 2 HLMP-4719L 8.0 6.0 4.0 2.0 HLMP-4700L 1 0 0 1.5 2.0 VF - FORWARD VOLTAGE (V) Fig. 1 Forward Current vs. Forward Voltage 2 of 4 0 2 4 6 8 10 IF - DC CURRENT PER LED (mA) Fig. 2 Relative Luminous Intensity vs. Forward Current 11/17/99 300003A SUPER BRIGHT AllnGaP T-1 3/4 (5 mm) LOW CURRENT LED LAMP - Tinted & Diffused SUPER RED SUPER YELLOW HLMP-4719L HLMP-4700L HLMP-4719L HLMP-4700L 1.0 RELATIVE INTENSITY -20 -10 0 10 20 -30 30 -40 40 -50 0.5 50 -60 60 -70 70 -80 -90 100 0 550 600 650 80 80 60 40 20 0 20 40 60 80 90 100 700 WAVELENGTH - nm Fig. 3 Relative Intensity vs Peak Wavelength 3 of 4 Fig. 4 Radiation Diagram 11/17/99 300003A SUPER BRIGHT AllnGaP T-1 3/4 (5 mm) LOW CURRENT LED LAMP - Tinted & Diffused DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 4 of 4 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. © 2000 Fairchild Semiconductor Corporation 11/17/99 300003A