Triple Balanced Mixer Model MM4xxL RF 2.0 to 8.0 GHz Multi-Octave Band Electrical Specifications : (1) Specifications Conditions Parameter SSB Conversion loss: (2) (3) RF (GHz) 2.0-8.0 2.0-8.0 Isolation LO to RF: LO to IF: RF to IF: 2.0-8.0 LO (GHz) 2.0-8.0 2.0-8.0 IF (MHz) 3.0-5.0 2.0-6.0 2.0-8.0 2.0-8.0 Min Typical 6.3 dB 7.3 dB 16 dB 18 dB 23 dB 27 dB 27 dB Max 7.5 dB 8.5 dB Input 1 dB Compression Point: 2.0-8.0 2.0-8.0 2.0-6.0 +5 dBm +8 dBm +12 dBm +15 dBm Input Third Order Intercept Point: 2.0-8.0 2.0-8.0 2.0-6.0 +14 +17 +21 +24 dBm dBm dBm dBm MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM48 LO Power: (4) 2.0-8.0 2.0-8.0 2.0-6.0 +10 +13 +17 +21 dBm dBm dBm dBm MM44 MM46 MM47 MM48 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. Outline: L1 MM4xxL Model MM4xxL LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Typical Performance at 25˚C SPECTRUM All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001