I N D U C T O R S July 2016 Inductors for High Frequency Circuits Multilayer Ceramic MLG-Q Series MLG0402Q Type MLG0402Q 0402 [01005 inch]* * Dimensions Code JIS[EIA] (2/15) I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (3/15) I N D U C T O R S Inductors for High Frequency Circuits Product compatible with RoHS directive Halogen-free Compatible with lead-free solders Multilayer Ceramic Overview of MLG0402Q Type FEATURES High Q type inductor for high-frequency circuits. Inductance range: from 0.2 to 33nH. 0.1n step inductance lineup. Compared with existing products, the size was greatly reduced, making it optimal for fine-pitch circuits. Optimal configuration that greatly improves the Q to 800MHz or higher. Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for Highfrequency. APPLICATION Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners and other high frequency circuits for the mobile communication industry PART NUMBER CONSTRUCTION MLG Series name 0402 L×W×H Dimensions (mm) 0402 0.4×0.2×0.2 Q Characteristics Q 0N2 B Inductance (nH) 1N1 1.1 11N 11 Inductance tolerance B ±0.1nH C ±0.2nH S ±0.3nH H ±3% J ±5% T 000 Packaging style Internal code T Taping 000 OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Package quantity Operating Storage Type temperature temperature (pieces/reel) (°C) (°C) MLG0402Q –55 to +125 –55 to +125 20000 The Storage temperature range is for after the circuit board is mounted. Individual weight (mg) 0.07 RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (4/15) I N D U C T O R S MLG0402Q Type RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150°C 180°C Time t1 60 to 120s Soldering Temp. Time T3 t2 230°C 30 to 60s Peak Temp. T4 250 to 260°C Time t3 10s max. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (5/15) I N D U C T O R S MLG0402Q Type 0.20±0.02 SHAPE & DIMENSIONS 0.11±0.03 0.11±0.03 0.20±0.02 0.40±0.02 Dimensions in mm 0.18 to 0.20 RECOMMENDED LAND PATTERN 0.2 0.15 to 0.2 0.15 to 0.2 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (6/15) I N D U C T O R S MLG0402Q Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 0.2 0.2 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 Tolerance ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH Q L, Q measuring frequency Self-resonant frequency DC resistance Rated current Part No. min. — — — — — — — — — — — — — — — — 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 (GHz)min. 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 9.0 9.0 9.0 (: )max. 0.10 0.10 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 (mA)max. 350 350 350 350 350 350 350 350 320 320 320 320 320 320 320 320 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 220 220 220 220 220 220 200 200 200 200 200 200 200 200 200 MLG0402Q0N2BT000 MLG0402Q0N2CT000 MLG0402Q0N3BT000 MLG0402Q0N3CT000 MLG0402Q0N4BT000 MLG0402Q0N4CT000 MLG0402Q0N5BT000 MLG0402Q0N5CT000 MLG0402Q0N6BT000 MLG0402Q0N6CT000 MLG0402Q0N7BT000 MLG0402Q0N7CT000 MLG0402Q0N8BT000 MLG0402Q0N8CT000 MLG0402Q0N9BT000 MLG0402Q0N9CT000 MLG0402Q1N0BT000 MLG0402Q1N0CT000 MLG0402Q1N0ST000 MLG0402Q1N1BT000 MLG0402Q1N1CT000 MLG0402Q1N1ST000 MLG0402Q1N2BT000 MLG0402Q1N2CT000 MLG0402Q1N2ST000 MLG0402Q1N3BT000 MLG0402Q1N3CT000 MLG0402Q1N3ST000 MLG0402Q1N4BT000 MLG0402Q1N4CT000 MLG0402Q1N4ST000 MLG0402Q1N5BT000 MLG0402Q1N5CT000 MLG0402Q1N5ST000 MLG0402Q1N6BT000 MLG0402Q1N6CT000 MLG0402Q1N6ST000 MLG0402Q1N7BT000 MLG0402Q1N7CT000 MLG0402Q1N7ST000 MLG0402Q1N8BT000 MLG0402Q1N8CT000 MLG0402Q1N8ST000 MLG0402Q1N9BT000 MLG0402Q1N9CT000 MLG0402Q1N9ST000 (GHz)typ. 20.0 20.0 18.5 18.5 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 19.5 19.5 20.0 20.0 16.8 16.8 16.8 16.6 16.6 16.6 16.2 16.2 16.2 16.0 16.0 16.0 15.8 15.8 15.8 15.6 15.6 15.6 14.4 14.4 14.4 13.4 13.4 13.4 13.9 13.9 13.9 12.2 12.2 12.2 (: )typ. 0.03 0.03 0.07 0.07 0.08 0.08 0.11 0.11 0.13 0.13 0.19 0.19 0.11 0.11 0.15 0.15 0.20 0.20 0.20 0.22 0.22 0.22 0.25 0.25 0.25 0.28 0.28 0.28 0.30 0.30 0.30 0.37 0.37 0.37 0.25 0.25 0.25 0.25 0.25 0.25 0.28 0.28 0.28 0.27 0.27 0.27 * Please contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Measurement item Product No. L, Q 4291B+16196D Self-resonant frequency 8720C DC resistance 4338A * Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (7/15) I N D U C T O R S MLG0402Q Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9 2.9 2.9 3.0 3.0 3.0 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.5 3.5 3.5 Tolerance ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH Q L, Q measuring frequency Self-resonant frequency DC resistance Rated current Part No. min. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 (GHz)min. 9.0 9.0 9.0 8.0 8.0 8.0 8.0 8.0 8.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 6.5 6.5 6.5 6.0 6.0 6.0 (: )max. 0.60 0.60 0.60 0.70 0.70 0.70 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.90 0.90 0.90 1.00 1.00 1.00 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 (mA)max. 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 180 180 180 180 180 180 180 180 180 MLG0402Q2N0BT000 MLG0402Q2N0CT000 MLG0402Q2N0ST000 MLG0402Q2N1BT000 MLG0402Q2N1CT000 MLG0402Q2N1ST000 MLG0402Q2N2BT000 MLG0402Q2N2CT000 MLG0402Q2N2ST000 MLG0402Q2N3BT000 MLG0402Q2N3CT000 MLG0402Q2N3ST000 MLG0402Q2N4BT000 MLG0402Q2N4CT000 MLG0402Q2N4ST000 MLG0402Q2N5BT000 MLG0402Q2N5CT000 MLG0402Q2N5ST000 MLG0402Q2N6BT000 MLG0402Q2N6CT000 MLG0402Q2N6ST000 MLG0402Q2N7BT000 MLG0402Q2N7CT000 MLG0402Q2N7ST000 MLG0402Q2N8BT000 MLG0402Q2N8CT000 MLG0402Q2N8ST000 MLG0402Q2N9BT000 MLG0402Q2N9CT000 MLG0402Q2N9ST000 MLG0402Q3N0BT000 MLG0402Q3N0CT000 MLG0402Q3N0ST000 MLG0402Q3N1BT000 MLG0402Q3N1CT000 MLG0402Q3N1ST000 MLG0402Q3N2BT000 MLG0402Q3N2CT000 MLG0402Q3N2ST000 MLG0402Q3N3BT000 MLG0402Q3N3CT000 MLG0402Q3N3ST000 MLG0402Q3N4BT000 MLG0402Q3N4CT000 MLG0402Q3N4ST000 MLG0402Q3N5BT000 MLG0402Q3N5CT000 MLG0402Q3N5ST000 (GHz)typ. 12.5 12.5 12.5 11.8 11.8 11.8 11.7 11.7 11.7 11.0 11.0 11.0 10.9 10.9 10.9 10.5 10.5 10.5 10.7 10.7 10.7 10.7 10.7 10.7 10.4 10.4 10.4 10.0 10.0 10.0 10.0 10.0 10.0 9.7 9.7 9.7 9.4 9.4 9.4 10.0 10.0 10.0 9.1 9.1 9.1 9.0 9.0 9.0 (: )typ. 0.30 0.30 0.30 0.36 0.36 0.36 0.43 0.43 0.43 0.46 0.46 0.46 0.43 0.43 0.43 0.54 0.54 0.54 0.54 0.54 0.54 0.54 0.54 0.54 0.56 0.56 0.56 0.52 0.52 0.52 0.45 0.45 0.45 0.58 0.58 0.58 0.66 0.66 0.66 0.73 0.73 0.73 0.73 0.73 0.73 0.74 0.74 0.74 * Please contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Measurement item Product No. L, Q 4291B+16196D Self-resonant frequency 8720C DC resistance 4338A * Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (8/15) I N D U C T O R S MLG0402Q Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 3.6 3.6 3.6 3.7 3.7 3.7 3.8 3.8 3.8 3.9 3.9 3.9 4.0 4.0 4.0 4.3 4.3 4.7 4.7 5.1 5.1 5.6 5.6 6.2 6.2 6.8 6.8 7.5 7.5 8.2 8.2 9.1 9.1 10.0 10.0 12.0 12.0 15.0 15.0 18.0 18.0 22.0 22.0 27.0 27.0 33.0 33.0 Tolerance ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.1nH ±0.2nH ±0.3nH ±0.3nH ±3% ±0.3nH ±3% ±0.3nH ±3% ±0.3nH ±3% ±0.3nH ±3% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% ±3% ±5% Q L, Q measuring frequency Self-resonant frequency DC resistance Rated current Part No. min. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 (GHz)min. 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.5 5.5 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.2 2.2 1.9 1.9 1.7 1.7 (: )max. 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.30 1.30 1.40 1.40 1.50 1.50 1.50 1.50 1.60 1.60 1.70 1.70 1.80 1.80 1.80 1.80 2.10 2.10 2.40 2.40 2.60 2.60 2.80 2.80 3.20 3.20 3.50 3.50 3.80 3.80 (mA)max. 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 160 160 160 160 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 130 130 120 120 120 120 MLG0402Q3N6BT000 MLG0402Q3N6CT000 MLG0402Q3N6ST000 MLG0402Q3N7BT000 MLG0402Q3N7CT000 MLG0402Q3N7ST000 MLG0402Q3N8BT000 MLG0402Q3N8CT000 MLG0402Q3N8ST000 MLG0402Q3N9BT000 MLG0402Q3N9CT000 MLG0402Q3N9ST000 MLG0402Q4N0BT000 MLG0402Q4N0CT000 MLG0402Q4N0ST000 MLG0402Q4N3ST000 MLG0402Q4N3HT000 MLG0402Q4N7ST000 MLG0402Q4N7HT000 MLG0402Q5N1ST000 MLG0402Q5N1HT000 MLG0402Q5N6ST000 MLG0402Q5N6HT000 MLG0402Q6N2ST000 MLG0402Q6N2HT000 MLG0402Q6N8HT000 MLG0402Q6N8JT000 MLG0402Q7N5HT000 MLG0402Q7N5JT000 MLG0402Q8N2HT000 MLG0402Q8N2JT000 MLG0402Q9N1HT000 MLG0402Q9N1JT000 MLG0402Q10NHT000 MLG0402Q10NJT000 MLG0402Q12NHT000 MLG0402Q12NJT000 MLG0402Q15NHT000 MLG0402Q15NJT000 MLG0402Q18NHT000 MLG0402Q18NJT000 MLG0402Q22NHT000 MLG0402Q22NJT000 MLG0402Q27NHT000 MLG0402Q27NJT000 MLG0402Q33NHT000 MLG0402Q33NJT000 (GHz)typ. 9.0 9.0 9.0 8.9 8.9 8.9 8.4 8.4 8.4 8.8 8.8 8.8 8.4 8.4 8.4 8.6 8.6 8.1 8.1 7.8 7.8 7.8 7.8 7.2 7.2 6.9 6.9 6.7 6.7 6.2 6.2 5.7 5.7 5.3 5.3 4.8 4.8 4.5 4.5 3.0 3.0 2.7 2.7 2.5 2.5 2.2 2.2 (: )typ. 0.75 0.75 0.75 0.73 0.73 0.73 0.70 0.70 0.70 0.77 0.77 0.77 0.71 0.71 0.71 0.77 0.77 0.88 0.88 0.90 0.90 1.02 1.02 1.04 1.04 1.12 1.12 1.13 1.13 1.16 1.16 1.20 1.20 1.45 1.45 1.64 1.64 1.77 1.77 1.94 1.94 2.18 2.18 2.44 2.44 2.71 2.71 * Please contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Measurement item Product No. L, Q 4291B+16196D Self-resonant frequency 8720C DC resistance 4338A * Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (9/15) I N D U C T O R S MLG0402Q Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 0.2 0.2 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.7 0.7 0.7 0.8 0.8 0.9 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 1.7 1.7 1.7 800MHz 0.2 0.2 0.3 0.3 0.4 0.4 0.5 0.5 0.5 0.5 0.7 0.7 0.7 0.7 0.8 0.8 0.9 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.5 1.5 1.5 1.5 1.5 1.5 1.6 1.6 1.6 1.8GHz 0.2 0.2 0.3 0.3 0.4 0.4 0.4 0.4 0.5 0.5 0.6 0.7 0.6 0.7 0.8 0.8 0.9 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 2.0GHz 0.2 0.2 0.3 0.3 0.4 0.4 0.4 0.4 0.5 0.5 0.6 0.7 0.6 0.7 0.8 0.8 0.9 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 2.4GHz 0.2 0.2 0.3 0.3 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.7 0.6 0.7 0.8 0.8 0.9 0.9 0.9 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 Q typ. 500MHz 8 8 7 7 9 9 9 9 7 7 8 9 8 9 10 10 10 10 10 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 11 11 11 Part No.* 800MHz 11 11 9 9 12 12 12 12 11 11 11 12 11 12 13 13 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 13 13 13 13 13 13 14 14 14 1.8GHz 18 18 15 15 19 19 19 19 17 17 18 20 18 20 21 21 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 19 19 19 22 22 22 21 21 21 22 22 22 2.0GHz 20 20 16 16 20 20 21 21 18 18 19 21 19 21 23 23 22 22 22 22 22 22 21 21 21 22 22 22 22 22 22 21 21 21 23 23 23 23 23 23 24 24 24 2.4GHz 23 23 19 19 22 22 23 23 20 20 22 24 22 24 26 26 25 25 25 25 25 25 24 24 24 25 25 25 25 25 25 23 23 23 26 26 26 25 25 25 27 27 27 MLG0402Q0N2BT000 MLG0402Q0N2CT000 MLG0402Q0N3BT000 MLG0402Q0N3CT000 MLG0402Q0N4BT000 MLG0402Q0N4CT000 MLG0402Q0N5BT000 MLG0402Q0N5CT000 MLG0402Q0N6BT000 MLG0402Q0N6CT000 MLG0402Q0N7BT000 MLG0402Q0N8BT000 MLG0402Q0N7CT000 MLG0402Q0N8CT000 MLG0402Q0N9BT000 MLG0402Q0N9CT000 MLG0402Q1N0BT000 MLG0402Q1N0CT000 MLG0402Q1N0ST000 MLG0402Q1N1BT000 MLG0402Q1N1CT000 MLG0402Q1N1ST000 MLG0402Q1N2BT000 MLG0402Q1N2CT000 MLG0402Q1N2ST000 MLG0402Q1N3BT000 MLG0402Q1N3CT000 MLG0402Q1N3ST000 MLG0402Q1N4BT000 MLG0402Q1N4CT000 MLG0402Q1N4ST000 MLG0402Q1N5BT000 MLG0402Q1N5CT000 MLG0402Q1N5ST000 MLG0402Q1N6BT000 MLG0402Q1N6CT000 MLG0402Q1N6ST000 MLG0402Q1N7BT000 MLG0402Q1N7CT000 MLG0402Q1N7ST000 MLG0402Q1N8BT000 MLG0402Q1N8CT000 MLG0402Q1N8ST000 * Please contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Product No. Manufacturer 4291B+16196D Keysight Technologies * Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (10/15) I N D U C T O R S MLG0402Q Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.4 2.5 2.5 2.5 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9 2.9 2.9 3.0 3.0 3.0 800MHz 1.8 1.8 1.8 1.8 1.8 1.8 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.4 2.5 2.5 2.5 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9 2.9 2.9 3.0 3.0 3.0 1.8GHz 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.9 2.9 2.9 3.0 3.0 3.0 2.0GHz 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.9 2.9 2.9 3.0 3.0 3.0 2.4GHz 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.2 2.2 2.2 2.2 2.2 2.2 2.4 2.4 2.4 2.4 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9 2.9 2.9 3.0 3.0 3.0 Q typ. 500MHz 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 9 9 9 9 9 9 Part No.* 800MHz 14 14 14 13 13 13 14 14 14 14 14 14 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 12 12 12 12 12 12 1.8GHz 22 22 22 21 21 21 22 22 22 22 22 22 21 21 21 21 21 21 21 21 21 20 20 20 21 21 21 20 20 20 20 20 20 20 20 20 19 19 19 19 19 19 2.0GHz 24 24 24 23 23 23 24 24 24 24 24 24 23 23 23 22 22 22 22 22 22 22 22 22 23 23 23 22 22 22 21 21 21 21 21 21 21 21 21 20 20 20 2.4GHz 27 27 27 26 26 26 27 27 27 27 27 27 25 25 25 25 25 25 25 25 25 24 24 24 25 25 25 24 24 24 23 23 23 23 23 23 23 23 23 22 22 22 MLG0402Q1N9BT000 MLG0402Q1N9CT000 MLG0402Q1N9ST000 MLG0402Q2N0BT000 MLG0402Q2N0CT000 MLG0402Q2N0ST000 MLG0402Q2N1BT000 MLG0402Q2N1CT000 MLG0402Q2N1ST000 MLG0402Q2N2BT000 MLG0402Q2N2CT000 MLG0402Q2N2ST000 MLG0402Q2N3BT000 MLG0402Q2N3CT000 MLG0402Q2N3ST000 MLG0402Q2N4BT000 MLG0402Q2N4CT000 MLG0402Q2N4ST000 MLG0402Q2N5BT000 MLG0402Q2N5CT000 MLG0402Q2N5ST000 MLG0402Q2N6BT000 MLG0402Q2N6CT000 MLG0402Q2N6ST000 MLG0402Q2N7BT000 MLG0402Q2N7CT000 MLG0402Q2N7ST000 MLG0402Q2N8BT000 MLG0402Q2N8CT000 MLG0402Q2N8ST000 MLG0402Q2N9BT000 MLG0402Q2N9CT000 MLG0402Q2N9ST000 MLG0402Q3N0BT000 MLG0402Q3N0CT000 MLG0402Q3N0ST000 MLG0402Q3N1BT000 MLG0402Q3N1CT000 MLG0402Q3N1ST000 MLG0402Q3N2BT000 MLG0402Q3N2CT000 MLG0402Q3N2ST000 * Please contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Product No. Manufacturer 4291B+16196D Keysight Technologies * Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (11/15) I N D U C T O R S MLG0402Q Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 3.2 3.2 3.2 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.5 3.5 3.5 3.6 3.6 3.6 3.7 3.7 3.7 3.8 3.8 3.8 4.1 4.1 4.5 4.5 4.8 4.8 5.3 5.3 5.9 5.9 6.5 6.5 7.1 7.1 7.8 7.8 8.6 8.6 800MHz 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.5 3.5 3.5 3.6 3.6 3.6 3.7 3.7 3.7 3.8 3.8 3.8 4.0 4.0 4.5 4.5 4.8 4.8 5.3 5.3 5.8 5.8 6.4 6.4 7.0 7.0 7.8 7.8 8.5 8.5 1.8GHz 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.4 3.4 3.4 3.5 3.5 3.5 3.7 3.7 3.7 3.7 3.7 3.7 4.0 4.0 4.5 4.5 4.8 4.8 5.3 5.3 5.9 5.9 6.5 6.5 7.1 7.1 7.9 7.9 8.7 8.7 2.0GHz 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.5 3.5 3.5 3.6 3.6 3.6 3.7 3.7 3.7 3.8 3.8 3.8 4.0 4.0 4.5 4.5 4.8 4.8 5.3 5.3 5.9 5.9 6.6 6.6 7.2 7.2 8.0 8.0 8.8 8.8 2.4GHz 3.1 3.1 3.1 3.2 3.2 3.2 3.3 3.3 3.3 3.4 3.4 3.4 3.5 3.5 3.5 3.6 3.6 3.6 3.7 3.7 3.7 3.8 3.8 3.8 4.1 4.1 4.6 4.6 4.9 4.9 5.4 5.4 6.0 6.0 6.7 6.7 7.4 7.4 8.3 8.3 9.1 9.1 Q typ. 500MHz 9 9 9 9 9 9 9 9 9 10 10 10 9 9 9 10 10 10 9 9 9 9 9 9 10 10 10 10 10 10 11 11 11 11 10 10 11 11 11 11 11 11 Part No.* 800MHz 12 12 12 12 12 12 12 12 12 13 13 13 12 12 12 13 13 13 12 12 12 12 12 12 13 13 13 13 13 13 14 14 14 14 13 13 14 14 14 14 14 14 1.8GHz 19 19 19 19 19 19 19 19 19 20 20 20 19 19 19 19 19 19 19 19 19 19 19 19 21 21 21 21 20 20 22 22 21 21 21 21 22 22 21 21 21 21 2.0GHz 21 21 21 20 20 20 20 20 20 22 22 22 21 21 21 21 21 21 20 20 20 20 20 20 23 23 23 23 22 22 23 23 23 23 22 22 23 23 23 23 23 23 2.4GHz 23 23 23 22 22 22 22 22 22 24 24 24 23 23 23 23 23 23 22 22 22 22 22 22 25 25 25 25 24 24 25 25 25 25 23 23 25 25 24 24 24 24 MLG0402Q3N3BT000 MLG0402Q3N3CT000 MLG0402Q3N3ST000 MLG0402Q3N4BT000 MLG0402Q3N4CT000 MLG0402Q3N4ST000 MLG0402Q3N5BT000 MLG0402Q3N5CT000 MLG0402Q3N5ST000 MLG0402Q3N6BT000 MLG0402Q3N6CT000 MLG0402Q3N6ST000 MLG0402Q3N7BT000 MLG0402Q3N7CT000 MLG0402Q3N7ST000 MLG0402Q3N8BT000 MLG0402Q3N8CT000 MLG0402Q3N8ST000 MLG0402Q3N9BT000 MLG0402Q3N9CT000 MLG0402Q3N9ST000 MLG0402Q4N0BT000 MLG0402Q4N0CT000 MLG0402Q4N0ST000 MLG0402Q4N3ST000 MLG0402Q4N3HT000 MLG0402Q4N7ST000 MLG0402Q4N7HT000 MLG0402Q5N1ST000 MLG0402Q5N1HT000 MLG0402Q5N6ST000 MLG0402Q5N6HT000 MLG0402Q6N2ST000 MLG0402Q6N2HT000 MLG0402Q6N8HT000 MLG0402Q6N8JT000 MLG0402Q7N5HT000 MLG0402Q7N5JT000 MLG0402Q8N2HT000 MLG0402Q8N2JT000 MLG0402Q9N1HT000 MLG0402Q9N1JT000 * Please contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Product No. Manufacturer 4291B+16196D Keysight Technologies * Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (12/15) I N D U C T O R S MLG0402Q Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 9.5 9.5 11.4 11.4 14.1 14.1 17.0 17.0 20.7 20.7 25.3 25.3 31.0 31.0 800MHz 9.5 9.5 11.4 11.4 14.0 14.0 17.2 17.2 21.1 21.1 25.7 25.7 32.2 32.2 1.8GHz 9.8 9.8 11.9 11.9 14.8 14.8 21.3 21.3 28.1 28.1 34.1 34.1 52.2 52.2 2.0GHz 9.9 9.9 12.2 12.2 15.2 15.2 23.3 23.3 32.0 32.0 38.9 38.9 2.4GHz 10.3 10.3 12.8 12.8 16.2 16.2 29.2 29.2 45.2 45.2 Q typ. 500MHz 11 11 11 11 11 11 11 11 10 10 10 10 10 10 Part No.* 800MHz 14 14 13 13 14 14 13 13 12 12 12 12 12 12 1.8GHz 21 21 20 20 20 20 16 16 13 13 12 12 10 10 2.0GHz 22 22 21 21 21 21 16 16 12 12 11 11 2.4GHz 23 23 21 21 21 21 13 13 9 9 MLG0402Q10NHT000 MLG0402Q10NJT000 MLG0402Q12NHT000 MLG0402Q12NJT000 MLG0402Q15NHT000 MLG0402Q15NJT000 MLG0402Q18NHT000 MLG0402Q18NJT000 MLG0402Q22NHT000 MLG0402Q22NJT000 MLG0402Q27NHT000 MLG0402Q27NJT000 MLG0402Q33NHT000 MLG0402Q33NJT000 * Please contact us for information on inductance tolerance, G (±2%). ○ Measurement equipment Product No. Manufacturer 4291B+16196D Keysight Technologies * Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (13/15) I N D U C T O R S MLG0402Q Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 1000 27N 33N 22N 100 18N Inductance(nH) 15N 12N 10N 10 8N2 6N8 5N6 4N7 3N9 3N3 2N7 2N2 1N8 1N5 1N2 1N0 1 0 10 100 1000 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A+16196D Keysight Technologies * Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (14/15) I N D U C T O R S MLG0402Q Type ELECTRICAL CHARACTERISTICS Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 50 40 2N2 30 1N8 2N7 5N6 1N0 1N5 3N3 6N8 3N9 Q 1N2 4N7 10N 8N2 12N 15N 20 10 18N 22N 33N 0 10 100 1000 27N 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A+16196D Keysight Technologies * Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm (15/15) I N D U C T O R S MLG0402Q Type PACKAGING STYLE REEL DIMENSIONS ø60min. 1.0 2.0±0.5 8.4 +2.0 –0.0 ø13±0.2 14.4max. ø21±0.8 ø180±2.0 Dimensions in mm Cavity 3.5±0.05 1.5 +0.1 –0.0 Type MLG0402Q A 0.46±0.04 B 0.26±0.04 K 0.4 max. A 8.0±0.3 Sprocket hole 1.75±0.1 TAPE DIMENSIONS K B 4.0±0.1 2.0±0.05 160min. Taping 2.0±0.05 200min. 300min. Drawing direction Marking Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160706 / inductor_commercial_high-frequency_mlg0402q_en.fm