Metal Package PMT
Photosensor Modules H5773/H5783/H6779/H6780 Series
The H5773/H5783/H6779/H6780 series are photosensor modules housing a metal
package PMT and high-voltage power supply circuit. The metal package PMTs
have a metallic package with the same diameter as a TO-8 package used for semiconductor photodetectors, and deliver high gain, wide dynamic range and highspeed response while maintaining small dimensions identical to those of photodiodes. The internal high-voltage power supply circuit is also compact, making the
module easy to use.
Considering the mounting methods, a cable output type and a pin output type are
provided, and a total of 7 types are available according to the wavelength range to
be measured. A P-type is also available with selected gain and dark count ideal for
photon counting under extremely low light conditions.
Product Variations
Suffix
Type No.
H5773
H5783
H5773P
H5783P
H6779
H6780
None -01 -02
-03
-04 -06
yes
yes
no
no
yes
yes
yes
yes
no
no
yes
yes
yes
yes
no
no
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
no
yes
yes
yes
yes
no
no
yes
yes
-20 Output Type
yes
yes
no
no
yes
yes
Standard Type
P Type
Anode
Cathode
Max. Output Signal Current
Max. Control Voltage
Recommended Control Voltage Adjustment Range
Effective Area
Sensitivity Adjustment Range
Peak Sensitivity Wavelength
Min.
Luminous Sensitivity
Typ.
Blue Sensitivity Index (CS 5-58)
Red/White Ratio
Radiant Sensitivity *1
Luminous
Min.
Sensitivity
Typ.
Radiant Sensitivity *1 *2
Typ.
Dark Current *2 *3
Max.
Min.
2
Gain *
Typ.
Radiant Sensitivity *1 *2
Typ.
Dark Count *2 *3
Max.
Rise Time *2
Ripple Noise *2 *4 (peak to peak) Max.
Settling Time *5
Operating Ambient Temperature
Storage Temperature
Weight
16
Low power consumption
For photon counting
Low power consumption
Low ripple noise
Fast settling time
Suffix
None
-01
-02
-03
-04
-06
-20
Spectral Response
300 nm to 650 nm
300 nm to 850 nm
300 nm to 880 nm
185 nm to 650 nm
185 nm to 850 nm
185 nm to 650 nm
300 nm to 900 nm
The suffix -06 type (synthetic silica window) has
higher sensitivity than the -03 type below 300
nm in wavelength range.
Specifications
Parameter
Suffix
Input Voltage
Max. Input Voltage
Max. Input Current
On-board
Cable output
On-board
Cable output
On-board
Cable output
Features
H5773 / H5783 / H6779 / H6780 Series
-01, -04
-20
-02
-03, -06
+11.5 to +15.5
+18
H5773 / H5783 Series: 9
H6779 / H6780 Series: 30
100
+1.0 (Input impedance 100 kΩ)
+0.25 to +0.9
8
1: 104
420
500
630
420
400
40
350
200
40
80
70
250
500
70
150
8
—
—
8
—
—
0.25
0.45
—
0.2
62
78
58
62
60
10
35
25
10
15
50
125
250
50
75
4.3 × 104
2.9 × 104
3.9 × 104
4.3 × 104
3.0 × 104
0.2
0.2
0.4
2
2
2
2
4
20
20
7.5 × 105
—
—
1 × 106
—
6.2 × 104
—
80
—
400
0.78
H5773 Series
H5783 Series
H6779 Series
H6780 Series
1.2
0.6
2
0.2
+5 to +50
+5 to +45
-20 to +50
60
80
60
80
None
*1: Measured at the peak sensitivity wavelength
*2: Control voltage = +0.8 V
*3: After 30 minute storage in darkness
*4: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 MΩ, Load capacitance = 22 pF
*5: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V.
Unit
—
V
V
mA
µA
V
V
mm
—
nm
µA/lm
—
—
mA/W
A/lm
A/W
nA
—
A/W
s-1
ns
mV
s
°C
°C
g
Current Output Type Photosensor Modules
Characteristics (Cathode radiant sensitivity, Gain)
TPMOB0132EA
TPMOB0133EB
100
108
100
-02 Type
None Type
10
-03 Type
1
200
300
400
500
600
700
107
P Type
-01 Type
106
10
-20 Type
GAIN
CATHODE RADIANT SENSITIVITY (mA/W)
CATHODE RADIANT SENSITIVITY (mA/W)
-06 Type
0.1
100
TPMOB0134EB
None, -03, -06 Type
-04 Type
104
1
-01, -02, -04, -20 Type
103
102
0.25 0.3
0.1
100 200 300 400 500 600 700 800 900 1000
800
105
WAVELENGTH (nm)
0.4
WAVELENGTH (nm)
0.5
0.7
1.0 1.2
1.5
2.0
CONTROL VOLTAGE (V)
Sensitivity Adjustment Method
Resistance Programming
Voltage Programming
POWER SUPPLY
SIGNAL OUTPUT
PHOTOSENSOR MODULE
POWER SUPPLY
LOW VOLTAGE INPUT
GND
Vref OUTPUT
Vcontrol INPUT
+0.25 V to
+0.9 V
GND
LOW VOLTAGE INPUT
GND
Vref OUTPUT
Vcontrol INPUT
+15 V
GND
2 kΩ *2
+15 V
GND
PHOTOSENSOR MODULE
SIGNAL OUTPUT
• Adjust the control voltage
to adjust the sensitivity.
• Electrically insulate the
reference voltage output.
*1: When using a potentiometer to adjust
sensitivity, monitor the control voltage
so it does not exceed +1.0 V.
*2: H6779/H6780 series has this 2 kΩ
resistor.
No external resistor is needed.
MONITOR
POTENTIOMETER (*1) (10 kΩ)
TPMOC0131EC
Dimensional Outlines (Unit: mm)
Option (Optical Fiber Adapter)
(Unit: mm)
H5773/H6779 Series
E5776 (FC Type)
50.0 ± 0.5
14.0 ± 0.2
22.0 ± 0.5
12.7 5.08 17.78 5.08
4-M2 DEPTH: 4
11
("-06" TYPE:
0±0.2)
EFFECTIVE
AREA 8
8
10
WINDOW
76
54
BOTTOM VIEW
4-M2
FC-R
TOP VIEW
SIDE VIEW
TACCA0055EA
E5776-51 (SMA Type)
1
15.24
3.5 ± 0.2
8.5
23
1
1NO CONNECTION
2Vref OUTPUT (+1.2 V)
3Vcontrol INPUT (+0.25 V to +0.9 V)
4LOW VOLTAGE INPUT (+15 V)
5GND
6SIGNAL GND
7SIGNAL OUTPUT
8NO CONNECTION
TOP VIEW
12 ± 1 18.0 ± 0.5
1.5±0.2
15.24
14.0 ± 0.2
12.5
25.0 ± 0.5
14.0 ± 0.2
22.0 ± 0.5
SIDE VIEW
TPMOA0010EC
14.0 ± 0.2
10.7
5.0
H5783/H6780 Series
22.0 ± 0.5
50.0 ± 0.5
14.0 ± 0.2
450 ± 20
1.5 ± 0.2
("-06" TYPE: 0 ± 0.2)
10
WINDOW
LOW VOLTAGE INPUT : AWG26 (RED, +15 V)
GND
: AWG26 (BLACK)
Vref OUTPUT
: AWG26 (BLUE, +1.2 V)
Vcontrol INPUT
: AWG26 (WHITE, +0.25 V to +0.9 V)
SIGNAL OUTPUT
: RG-174/U
4-M2
3.0
SMA
FRONT VIEW
SIDE VIEW
TACCA0239EA
EFFECTIVE
AREA 8
4-M2 DEPTH: 4
TOP VIEW
SIDE VIEW
TPMOA0011EC
17