BP2500F0603AT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 1.6 X 0.8 X 0.6 mm, RoHS compliant. 2. Provide low insertion loss, and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500F0603AT Specification Symbol Dimension (mm) 2.8 dB max at -40°C to +85°C L 1.60 ± 0.15 VSWR 2.0 max W 0.80 ± 0.15 Impedance 50 Ω T 0.60 ± 0.10 A 0.55 ± 0.15 B 0.50 ± 0.15 C 0.35 ± 0.15 D 0.50 ± 0.15 E 0.20 ± 0.15 2400 - 2500 MHz Frequency range 2.5 dB max at +25°C Insertion Loss (max) 38 dB @ 880 - 915 MHz 40 dB @ 1710 - 1850 MHz 40 dB @ 1850 - 1910 MHz Attenuation (min.) 35 dB @ 1920 - 1990 MHz 25 dB @ 2170 MHz 30 dB @ 4800 - 5000 MHz 20 dB @ 7200 - 7500 MHz Operating temperature range -40°C to +85°C TERMINAL CONFIGURATION P3 PIN Definition P1 INPUT P2 GND P3 OUTPUT P2 P1 Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500F0603AT BAND PASS FILTER SPECIFICATION Rev. A PCB DESIGN/LAYOUT CONSIDERATION Note: - Unit in mm - Design trace width to be 50Ω impedance. Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989