ACT330 Active-Semi High Performance ActivePSRTM Primary Switching Regulator and US Energy Star standards) while using very few external components. FEATURES Ultra Low Standby Power < 30mW The ACT330 ensures safe operation with complete protection against all fault conditions. Built-in protection circuitry is provided for output shortcircuit, output over-voltage, line under-voltage, and over temperature conditions. Meet 5-Star Energy Saving Requirement Patented Primary Side Regulation Technology No Opto-Coupler The ACT330 ActivePSRTM is optimized for high performance, cost-sensitive applications, and utilizes Active-Semi’s proprietary primary-side feedback architecture to provide accurate constant voltage, constant current (CV/CC) regulation without the need of an opto-coupler or reference device. Integrated line and primary inductance compensation circuitry provides accurate constant current operation despite wide variations in line voltage and primary inductance. Integrated output cord resistance compensation further enhances output accuracy. The ACT330 achieves excellent regulation and transient response, yet requires less than 30mW of standby power. Best-in-Class Constant Voltage, Constant Current Accuracy Low EMI Proprietary Fast Startup Circuit Built-in Soft-Start Circuit Integrated Line and Primary Inductance Compensation Integrated Programmable Output Cord Resistance Compensation Line Under-Voltage, Output Over-Voltage, Output Short-Circuit and Over-Temperature Protection The ACT330 is optimized for 2W to 7W applications. It is available in space-saving 6 pin SOT23-6 package. Complies with all Global Energy Efficiency and CEC Average Efficiency Standards Figure 1: Simplified Application Circuit Adjustable power from 2W to 7W Minimum External Components Tiny SOT23-6 Package INPUT OUTPUT APPLICATIONS Chargers for Cell Phones, PDAs, MP3, Portable Media Players, DSCs, and Other Portable Devices and Appliances RCC Adapter Replacements VDD Linear Adapter Replacements BD ACT330 Standby and Auxiliary Supplies SW CS GENERAL DESCRIPTION FB G The ACT330 belongs to the high performance patented ActivePSRTM Family of Universal-input AC/DC off-line controllers for battery charger and adapter applications. It is designed for flyback topology working in discontinuous conduction mode (DCM). The ACT330 meets all of the global energy efficiency regulations (CEC, European Blue Angel, Innovative PowerTM -1- Active-Semi Confidential¯Do Not Copy or Distribute ActivePSRTM is a trademark of Active-Semi. Downloaded from DatasheetLib.com - datasheet search engine www.active-semi.com Copyright © 2009 Active-Semi, Inc. ACT330 ORDERING INFORMATION PART NUMBER TEMPERATURE RANGE PACKAGE PINS PACKING METHOD TOP MARK ACT330US-T -40°C to 85°C SOT23-6 6 TAPE & REEL FSTT PIN CONFIGURATION 1 G 2 BD 3 FSTT SW 6 CS 5 FB 4 VDD SOT23-6 ACT330US-T PIN DESCRIPTIONS PIN NAME DESCRIPTION 1 SW 2 G 3 BD 4 VDD 5 FB Feedback Pin. Connect this pin to a resistor divider network from the auxiliary winding. 6 CS Current Sense Pin. Connect an external resistor (RCS) between this pin and ground to set peak current limit for the primary switch. The peak current limit is set by (0.396V × 0.9) / RCS. For more detailed information, see Application Information. Switch Drive. Switch node for the external NPN transistor. Connect this pin to the external power NPN’s emitter. This pin also supplies current to VDD during startup. Ground. Base Drive. Base driver for the external NPN transistor. Power Supply. This pin provides bias power for the IC during startup and steady state operation. Innovative PowerTM -2- Active-Semi Confidential¯Do Not Copy or Distribute ActivePSRTM is a trademark of Active-Semi. Downloaded from DatasheetLib.com - datasheet search engine www.active-semi.com Copyright © 2009 Active-Semi, Inc. ACT330 Figure 6: Universal VAC Input, 5V/0.7A Output Charger L1 FR1 L T1 R1 D4 D1 VO R2 D3 D2 + C1 + C2 D7 R10 D5 R11 C7 + Q1 N GND R4 R8 BD R5 SW U1 VDD ACT330 FB CS G C3 R7 R9 Table 1: ACT330 Bill of Materials ITEM REFERENCE DESCRIPTION QTY MANUFACTURER IC, ACT330US-T, SOT23-6 1 Active-Semi Capacitor, Electrolytic, 4.7µF/400V, 8 × 12mm 2 KSC POE 1 U1 2 C1, C2 3 C3 Capacitor, Ceramic, 4.7µF/35V, 1206, SMD 1 4 C7 Capacitor, Electrolytic, 470µF/10V, 8 × 12mm 1 KSC 5 D1-D4 Diode, Rectifier, 1000V/1A, 1N4007, DO-41 4 Good-Ark 6 D5 Diode, Ultra Fast, FR107, 1000V/1.0A, DO-41 1 Good-Ark 7 D7 Diode, Schottky, 40V/2A, SB240, DO-15 1 Good-Ark 8 L1 Axial Inductor, 1.5mH, 0410, DIP 1 Amode Tech 9 Q1 Transistor, NPN, 900V, 1.5A, KSB13003HR, TO-92 1 Semi How 10 FR1 Fusible Resistor, 1W, 10Ω, 5% 1 TY-OHM 11 R1, R2 Chip Resistor, 15MΩ, 1206, 5% 2 TY-OHM 12 R4 Chip Resistor, 162k, 0805, 5% 1 TY-OHM 13 R5 Chip Resistor, 22Ω, 0603, 5% 1 TY-OHM 14 R7 Chip Resistor, 1.07Ω, 1206, 1% 1 TY-OHM 15 R8 Chip Resistor, 57.6k, 0805, 1% 1 TY-OHM 16 R9 Chip Resistor, 9.53k, 0805, 1% 1 TY-OHM 17 R10 Chip Resistor, 22Ω, 0805, 5% 1 TY-OHM 18 R11 Chip Resistor, 6.2k, 0805, 5% 1 TY-OHM 19 T1 Transformer, LP = 2.35mH ± 7%, EE16 1 Innovative PowerTM -3- Active-Semi Confidential¯Do Not Copy or Distribute ActivePSRTM is a trademark of Active-Semi. Downloaded from DatasheetLib.com - datasheet search engine www.active-semi.com Copyright © 2009 Active-Semi, Inc. ACT330 PACKAGE OUTLINE SOT23-6 PACKAGE OUTLINE AND DIMENSIONS D è b 0.2 SYMBOL e A A1 A2 e1 DIMENSION IN INCHES MIN MAX MIN MAX A 1.050 1.250 0.041 0.049 A1 0.000 0.100 0.000 0.004 A2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 D 2.820 3.020 0.111 0.119 E 1.500 1.700 0.059 0.067 E1 2.650 2.950 0.104 0.116 L E E1 c DIMENSION IN MILLIMETERS e e1 L 0.950 TYP 1.800 2.000 0.700 REF 0.037 TYP 0.071 0.079 0.028 REF L1 0.300 0.600 0.012 0.024 è 0° 8° 0° 8° Active-Semi, Inc. reserves the right to modify the circuitry or specifications without notice. Users should evaluate each product to make sure that it is suitable for their applications. Active-Semi products are not intended or authorized for use as critical components in life-support devices or systems. Active-Semi, Inc. does not assume any liability arising out of the use of any product or circuit described in this datasheet, nor does it convey any patent license. Active-Semi and its logo are trademarks of Active-Semi, Inc. For more information on this and other products, contact [email protected] or visit http://www.active-semi.com. For other inquiries, please send to: 2728 Orchard Parkway, San Jose, CA 95134-2012, USA Innovative PowerTM -4- Active-Semi Confidential¯Do Not Copy or Distribute ActivePSRTM is a trademark of Active-Semi. Downloaded from DatasheetLib.com - datasheet search engine www.active-semi.com Copyright © 2009 Active-Semi, Inc.