SPICE MODELS: ES1A ES1B ES1C ES1D ES1G ES1A - ES1G 1.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features · · · · · · Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 30A Peak Ideally Suited for Automated Assembly Lead Free Finish/RoHS Compliant (Note 5) · · SMA B Mechanical Data Dim Min Max A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D 0.15 0.31 5.59 Case: SMA Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · Polarity: Cathode Band or Cathode Notch A C Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 D J Marking: Type Number & Date Code: See Below Ordering Information: See Below H Weight: 0.064 grams (approximate) Maximum Ratings and Electrical Characteristics G E E 4.80 G 0.10 0.20 H 0.76 1.52 J 2.01 2.30 All Dimensions in mm @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 110°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Drop Symbol ES1A ES1B ES1C ES1D ES1G Unit VRRM VRWM VR 50 100 150 200 400 V VR(RMS) 35 70 105 140 280 V IO 1.0 A IFSM 30 A ¾ 1.25 @ IF = 0.6A @ IF = 1.0A VFM @ TA = 25°C @ TA = 100°C IRM 5.0 200 Reverse Recovery Time (Note 1) trr 25 Typical Total Capacitance (Note 2) CT 10 pF RqJT 40 °C/W Tj, TSTG -65 to +150 °C Peak Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance, Junction to Terminal (Note 3) Operating and Storage Temperature Range Ordering Information Notes: 1. 2. 3. 4. 5. 0.90 0.98 V mA 35 ns (Note 4) Device* Packaging Shipping ES1x-13-F SMA 5000/Tape & Reel Measured with I F = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Unit mounted on PC board with 5.0 mm 2 (0.013 mm thick) copper pad as heat sink. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. *x = Device type, e.g. ES1A-13-F. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. Marking Information YWW XXXX DS14001 Rev. 11 - 2 1 of 3 www.diodes.com XXXX = Product type marking code, ex. ES1A = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 ES1A - ES1G ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 1.5 1.0 0.5 0 25 50 75 100 125 150 10 ES1A - ES1D 0.1 Tj = 25° C 0.01 175 0 TT, TERMINAL TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) ES1G 1.0 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 Single Half-Sine-Wave (JEDEC Method) Tj = 100° C 20 10 10 1.0 Tj = 25° C 0 0.1 1 10 100 0 NUMBER OF CYCLES AT 60 Hz Fig. 3 Surge Current Derating Curve 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS14001 Rev. 11 - 2 2 of 3 www.diodes.com ES1A - ES1G IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the express written approval of Diodes Incorporated. DS14001 Rev. 11 - 2 3 of 3 www.diodes.com ES1A - ES1G