MMSD914 General Description: Features: The high breakdown voltage, fast switching speed and high forward conductance of this diode packaged in a SOD-123 Surface Mount package makes it desirable also as a general purpose diode. • Compact surface mount with same footprint as mini-melf. • 400 milliwatt Power Dissipation package. • High Breakdown Voltage, Fast Switching Speed. • Typical capacitance less than 1.5 picofarad. Ordering: • 7 inch reel (178 mm); 8 mm Tape; 3,000 units per reel. High Conductance Fast Diode Absolute Maximum Ratings* Sym Tstg TJ PD R OJA Wiv IO IF iF(surge) TA = 25OC unless otherwise noted Parameter Storage Temperature Operating Junction Temperature Total Power Dissipation at TA = 25OC Linear Derating Factor from TA = 25OC Thermal Resistance Junction-to-Ambient Working Inverse Voltage Average Rectified Current DC Forward Current (IF) Peak Forward Surge Current (IFSM) Pulse Width = 1.0 Second Pulse Width = 1.0 microsecond Value Units -55 to +150 -55 to +150 400 3.2 312 75 200 600 1.0 2.0 OC OC W mW/OC OC/W V mA mA Amp Amp *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired ELECTRICALLY THE SAME AS THE FDLL914 DEVICE. SOURCED FROM THE 1P PRODUCT. 2 1 Top Mark: 5D Actual Size Electrical Characteristics SYM TA = CHARACTERISTICS BV Breakdown Voltage IR Reverse Leakage VF 25OC unless otherwise noted MIN MAX TEST CONDITIONS V V IR = 100 uA IR = 5.0 uA 25 50 5.0 nA uA uA VR = VR = VR = 20 V 20 V TA = 150OC 75 V Forward Voltage 1.0 V IF = 10 mA CT Capacitance 4.0 pF VR = 0.0 V, f = 1.0 MHz TRR Reverse Recovery Time 4.0 ns IF = 10 mA VR = 6.0 V IRR = 1.0 mA RL = 100 Ohms © 1999 Fairchild Semiconductor Corporation 100 75 UNITS MMSD914 - Rev. A SOD-123 PACKAGE PACKAGE CODE = (D6) Fairchild Semiconductor's Criteria DIM MIN (mils) MAX (mils) MIN (mm) MAX (mm) A 55 71 1.400 1.800 B 100 112 2.550 2.850 C 35 46 0.880 1.180 D 142 154 3.600 3.900 E ---- ---- ------- ------- F 21 28 0.546 0.70 G 0.5 4 H 13 ---- 0.322 ------- I 4 8 0.095 0.195 Actual Size A 1 2 B D A C I F H G 1.2 2 mm 48 mils 0.91 mm 2.36 mm 0.91 mm 36 mils 93 mils 36 mils 4.19 mm 165 mils SOD-123 LAND PADS 0.0135 0.1015 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.