SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 100 µH Rated current 65 to 800 mA Construction ■ Ceramic or ferrite core ■ Laser-welded winding ■ Flame-retardant encapsulation Features ■ ■ ■ ■ Very wide temperature range (up to 145 °C) High Q factor High resonance frequency Suitable for reflow (IR and vapor phase) and wave soldering Applications ■ ■ ■ ■ Filtering of supply voltages, coupling, decoupling Antenna systems Automotive electronics Telecommunications Terminals ■ ■ ■ ■ ■ Electro-plated 0,4 µm Cu, 1–2 µm Ag, 5–7 µm Sn Base material CuSn6 Suitable for soldering and conductive adhesion No leaching during wave soldering Marking Marking on component: Manufacturer, L value (in nH) and tolerance of L value (coded), date of manufacture (coded) Minimum data on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 8-mm blister tape, wound on 180-mm or 330-mm ∅ reel For details on taping, packing and packing units see page 153 99 04/00 SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 General technical data Rated inductance L R Measured with impedance analyzer HP 4194A at frequency fL Q factor Qmin Measured with impedance analyzer HP 4194A/HP 4291A at frequency fQ Rated current IR Maximum permissible dc with inductance decrease ∆L /L0 ≤ 10 % and temperature increase of ≤ 20 K at rated temperature of 125°C Self-resonance frequency fres, min Measured with network analyzer HP 8753 DC resistance R max Measured at 20°C ambient temperature, measuring current < IR Climatic category In accordance with IEC 60068-1 55/125/56 (– 55°C/+ 125°C/56 days damp heat test) Solderability In accordance with IEC 60068-2-58 (215 ± 3)°C, (3 ± 0,3) s Wetting of soldering area: ≥ 90 % Resistance to soldering heat In accordance with IEC 60068-2-20 260°C, 10 s ∆L/L ≤ ± 3 % Permissible PCB bending 2 mm (100 mm long standard PCB) Weight Approx. 50 mg 100 04/00 SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Dimensional drawing 2±0,1 1) 0,5±0,2 1) 2±0,1 0,4 min.1) 3,2+0,3 0,15 max. 2,5+0,3 Marking 1) Soldering area, tinned IND0063-T-E A Layout recommendation B C D B SSB1227-Z Dimensions (mm) A B C D Wave soldering 2,3 1,60 2,1 5,3 Reflow soldering 2,7 1,15 2,1 4,4 101 04/00 SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Characteristics and ordering codes LR µH Tolerance1) fL MHz Qmin fQ MHz IR mA Rmax Ω fres, min MHz Ordering code 2) (∅ 180-mm reel) Core material: ceramics 0,0082 0,010 0,012 0,015 ±5% ^ J ± 10 % ^ K 10 20 100 800 0,08 4000 B82422-A3829-+100 10 20 100 750 0,09 4000 B82422-A3100-+100 10 25 100 700 0,10 3500 B82422-A3120-+100 10 27 100 640 0,12 3000 B82422-A3150-+100 0,018 10 30 100 640 0,12 2500 B82422-A3180-+100 0,022 10 30 100 600 0,14 2500 B82422-A3220-+100 0,027 10 23 50 600 0,14 1850 B82422-A3270-+100 0,033 10 20 50 540 0,17 1700 B82422-A3330-+100 0,039 10 25 50 530 0,18 1450 B82422-A3390-+100 0,047 10 26 50 510 0,19 1350 B82422-A3470-+100 0,056 10 26 50 500 0,20 1200 B82422-A3560-+100 0,068 10 27 50 480 0,21 1150 B82422-A3680-+100 0,082 10 27 50 450 0,24 1050 B82422-A3820-+100 0,10 10 25 50 440 0,26 1000 B82422-A3101-+100 0,12 1 22 30 400 0,32 880 B82422-A3121-+100 0,15 1 25 30 390 0,33 850 B82422-A3151-+100 0,18 1 25 30 360 0,38 800 B82422-A3181-+100 0,22 1 25 30 280 0,64 700 B82422-A3221-+100 0,27 1 20 30 235 0,90 650 B82422-A3271-+100 0,33 1 22 30 200 1,3 580 B82422-A3331-+100 0,39 1 22 30 190 1,4 540 B82422-A3391-+100 0,47 1 22 30 150 2,2 480 B82422-A3471-+100 0,56 1 22 30 150 2,2 400 B82422-A3561-+100 0,68 1 22 30 145 2,4 280 B82422-A3681-+100 0,82 1 22 30 140 2,5 240 B82422-A3821-+100 1) Closer tolerances and special versions upon request. 2) Replace the + by the code letter for the required inductance tolerance. For reel size ∅ 330 mm append code number »8«. Example: B82422-A3829-K108 102 04/00 SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Characteristics and ordering codes (continued) LR µH Tolerance1) fL MHz Qmin fQ MHz IR mA Rmax Ω fres, min MHz Ordering code 2) (∅ 180-mm reel) Core material: ferrite 1,0 1,2 1,5 1,8 ±5% ^ J ± 10 % ^ K 1 20 7,96 380 0,34 320 B82422-A1102-+100 1 20 7,96 370 0,37 300 B82422-A1122-+100 1 20 7,96 340 0,50 270 B82422-A1152-+100 1 25 7,96 290 0,60 250 B82422-A1182-+100 2,2 1 25 7,96 270 0,75 125 B82422-A1222-+100 2,7 1 25 7,96 240 0,88 110 B82422-A1272-+100 3,3 1 27 7,96 200 1,20 110 B82422-A1332-+100 3,9 1 27 7,96 190 1,40 110 B82422-A1392-+100 4,7 1 27 7,96 150 2,20 110 B82422-A1472-+100 5,6 1 27 7,96 140 2,60 100 B82422-A1562-+100 6,8 1 27 7,96 135 2,80 90 B82422-A1682-+100 8,2 1 27 7,96 130 3,00 90 B82422-A1822-+100 10 1 27 2,52 180 1,60 25 B82422-A1103-+100 12 0,1 27 2,52 175 1,65 23 B82422-A1123-+100 15 0,1 27 2,52 165 1,85 20 B82422-A1153-+100 18 0,1 27 2,52 155 2,00 17 B82422-A1183-+100 22 0,1 27 2,52 140 2,65 16 B82422-A1223-+100 27 0,1 27 2,52 120 3,70 15 B82422-A1273-+100 33 0,1 27 2,52 105 4,50 13 B82422-A1333-+100 39 0,1 27 2,52 90 6,30 12 B82422-A1393-+100 47 0,1 27 2,52 85 7,00 11 B82422-A1473-+100 56 0,1 27 2,52 85 6,75 9 B82422-A1563-+100 68 0,1 27 2,52 80 7,70 9 B82422-A1683-+100 82 0,1 27 2,52 70 10,0 8 B82422-A1823-+100 100 0,1 27 2,52 65 11,5 7 B82422-A1104-+100 1) Closer tolerances and special versions upon request. 2) Replace the + by the code letter for the required inductance tolerance. For reel size ∅ 330 mm append code number »8«. Example: B82422-A1102-K108 103 04/00 SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Impedance |Z | versus frequency f measured with impedance analyzer HP 4291A Inductance L versus dc load current IDC measured with LCR meter HP 4275A SSB1539-7 10 5 Ω |Z | 10 4 10 3 10 2 10 1 100 µ H 10 µ H 1 µH 100 nH 10 nH 10 0 10 _1 10 3 10 4 10 5 kHz 10 6 f Q factor versus frequency f measured with impedance analyzer HP 4194A / HP 4291A Current derating Iop/IR versus ambient temperature TA SSB1450-B 1,2 IΙopB IΙRR 1,0 0,8 0,6 0,4 0,2 0 0 104 04/00 20 40 60 80 100 120 C 160 TA Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND ++49 89 636 09, FAX (0 89) 636-2 26 89 ( EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY ++49 89 636 09, FAX (0 89) 636-2 26 89 ( EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.