MBR20H150CT, MBRF20H150CT & SB20H150CT-1 Dual Common-Cathode High-Voltage Schottky Rectifier FEATURES ITO-220AB TO-220AB • Guardring for overvoltage protection • Low power loss, high efficiency • Low forward voltage drop • High frequency operation 3 3 MBR20H150CT MBRF20H150CT 1 2 1 2 • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TO-262AA TYPICAL APPLICATIONS For use in high frequency inverters, freewheeling and polarity protection applications. 1 2 3 SB20H150CT-1 PIN 1 PIN 2 PIN 3 CASE MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-262AA Epoxy meets UL 94V-0 flammability rating PRIMARY CHARACTERISTICS IF(AV) 2 x 10 A VRRM 150 V IFSM 200 A Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test VF 0.75 V Mounting Torque: 10 in-lbs maximum TJ 175 °C Polarity: As marked MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR20H150CT UNIT Maximum repetitive peak reverse voltage VRRM 150 V Working peak reverse voltage VRWM 150 V VDC 150 V IF(AV) 20 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 200 A Peak repetitive reverse current per diode at tp = 2 µs, 1 kHz IRRM 1.0 A Peak non-repetitive reverse surge energy per diode (8/20 µs waveform) ERSM 10 mJ EAS 11.25 mJ Maximum DC blocking voltage Maximum average forward rectified current total device per diode Non-repetitive avalanche energy per diode at 25 °C, IAS = 1.5 A, L = 10 mH Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage (ITO-220AB only) from terminals to heatsink t = 1 min dV/dt 10 000 V/µs TJ, TSTG - 65 to + 175 °C VAC 1500 V www.kersemi.com 1 MBR20H150CT, MBRF20H150CT & SB20H150CT-1 ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage per diode (1) IF = 10 A IF = 10 A IF = 20 A IF = 20 A Maximum reverse current per diode at working peak reverse voltage (1) SYMBOL VALUE UNIT TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C VF 0.90 0.75 0.99 0.86 V TJ = 25 °C TJ = 125 °C IR 5.0 1.0 µA mA Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL MBR MBRF MBRB UNIT RθJC 2.2 4.2 2.2 °C/W ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB MBR20H150CT-E3/45 PREFERRED P/N 2.06 45 50/tube Tube ITO-220AB MBRF20H150CT-E3/45 2.20 45 50/tube Tube TO-262AA SB20H150CT-1E3/45 1.58 45 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 260 Peak Forward Surge Current (A) Average Forward Current (A) 240 25 MBR, MBRB 20 MBRF 15 10 5 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 220 200 180 160 140 120 100 80 60 40 20 0 0 25 50 75 100 125 150 175 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Derating Curve (Total) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.kersemi.com 2 MBR20H150CT, MBRF20H150CT & SB20H150CT-1 10 000 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 175 °C 10 TJ = 125 °C TJ = 75 °C 1 TJ = 25 °C 1000 100 10 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 1000 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 10 000 TJ = 175 °C 100 TJ = 125 °C 10 1 TJ = 75 °C 0.1 TJ = 25 °C 0.01 10 20 30 40 50 60 70 80 90 100 10 MBRF MBR, MBRB 1 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode www.kersemi.com 3 MBR20H150CT, MBRF20H150CT & SB20H150CT-1 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.055 (1.40) 0.047 (1.20) 0.398 (10.10) 0.382 (9.70) 0.343 (8.70) TYP. ITO-220AB 0.185 (4.70) 0.169 (4.30) 0.150 (3.80) 0.139 (3.54) DIA. 0.114 (2.90) 0.106 (2.70) 0.408 (10.36) 0.392 (9.96) 0.055 (1.40) 0.049 (1.25) 1.29 (3.28) DIA. 1.21 (3.08) 0.138 (3.50) 0.122 (3.10) 0.154 (3.90) 0.138 (3.50) 0.067 (1.70) TYP. 0.331 (8.40) TYP. 1 PIN 2 3 0.370 (9.40) 0.354 (9.00) 0.630 (16.00) 0.614 (15.60) 1.161 (29.48) 1.106 (28.08) 0.118 (3.00) TYP. 1 0.102 (2.60) 0.087 (2.20) 0.523 (13.28) 0.507 (12.88) 0.064 (1.62) 0.056 (1.42) 0.200 (5.08) TYP. PIN 2 0.264 (6.70) 0.248 (6.50) 0.396 (10.05) 0.372 (9.45) 0.024 (0.60) 0.018 (0.45) 0.039 (1.00) 0.024 (0.60) 0.058 (1.47) MAX. 0.200 (5.08) TYP. TO-262AA 0.398 (10.10) 0.382 (9.70) 0.185 (4.70) 0.169 (4.30) 0.055 (1.40) 0.039 (1.00) 0.055 (1.40) 0.049 (1.25) K 0.370 (9.40) 0.354 (9.00) 1 PIN 2 3 0.425 (10.80) 0.393 (10.00) 0.488 (12.4) 0.472 (12.00) 0.102 (2.60) 0.087 (2.20) 0.523 (13.28) 0.507 (12.88) 0.035 (0.90) 0.028 (0.70) 0.100 (2.54) TYP. 0.633 (16.07) 0.601 (15.67) 3 0.100 (2.54) TYP. www.kersemi.com 4 0.320 (8.12) 0.304 (7.72) 0.117 (2.96) 0.101 (2.56) 0.035 (0.90) 0.028 (0.70) 0.100 (2.54) TYP. 0.270 (6.88) 0.255 (6.48) 0.638 (16.20) 0.598 (15.20) 0.634 (16.10) 0.618 (15.70) 0.193 (4.90) 0.177 (4.50) 0.108 (2.74) 0.092 (2.34) 0.405 (10.28) 0.389 (9.88) 0.062 (1.57) 0.054 (1.37) 0.200 (5.08) TYP. 0.024 (0.60) 0.018 (0.45) 0.024 (0.60) 0.018 (0.45)