ESD Protection Array CSRS065V0-G SO T2 Working Voltage: 5Volts RoHS Device 3- 6 Features -Fast Reverse Recovery Time. -Fast Turn on Time. -Low Capacitance SMD Packages. SOT-23-6 0.119(3.02) 0.111(2.82) Mechanical Data 0.067(1.70) 0.059(1.50) -Case: SOT-23-6 Standard package, molded plastic. -Terminals: Gold plated, solderable per MILSTD-750D, method 2026. -Mounting position: Any. -Weight: 0.013 gram (approx.). 0.079(2.00) 0.071(1.80) 0.008(0.20) 0.004(0.10) 0.045(1.15) 0.041(1.05) Circuit Diagram 0.020(0.50) 0.012(0.30) 0.024(0.60) 0.012(0.30) 0.004(0.10) 0.001(0.01) Dimensions in inches and (millimeter) Applications Transient 0.116(2.95) 0.104(2.65) + Rail Transient suppressed Receiver Driver GND Maximum Ratings (at T =25°C unless otherwise noted) A Parameter Symbol Value Unit TJ -55 to +150 °C Operating temperature Electrical Characteristics (at T =25°C unless otherwise noted) A Parameter Forward voltage Conditions IF=50mA Reverse stand-off voltage Symbol Max. Unit VF 1.2 V VRWM 5 V Min. Diode breakdown voltage IR=1μA Reverse leakage current VRWM=5V IR 5 μA Junction capacitance f=1MHz, VR=0V, Line to ground f=1MHz, VR=0V, Line to Line CT 5 pF ESD capability IEC 61000-4-2 ESD 16 kV Peak pulse power TP=8/20μS PPP 300 W VBD 6 V REV:C Page 1 QW-BP013 Comchip Technology CO., LTD. ESD Protection Array Rating and Characteristic Curves (CSRS065V0-G ) Fig.1 Pulse Power vs. Time Fig.2 Power Derating 10 100 80 % Rate Power Power (W) 1 0.1 60 40 20 0.01 0.1 0 1.0 10 0 1000 100 25 50 75 100 125 Ambient Temperature ( Time (μS) Fig.3 Pulse Waveform O 150 C) Fig.4 Clamp Voltage vs. Pulse Current 100 25 8/20μS waveform 20 Clamp Voltage (V) % of Ipp 80 60 40 20 15 10 5 8/20μS waveform 0 0 0 5 10 15 20 25 30 0 2 Time (μS) Fig.5 Forward Voltage vs. Forward Current 6 8 10 12 Fig.6 Capacitance vs. Reverse Voltage 10 8/20μS waveform 80 CJ, Capacitance (pF) Forward Voltage (V) 100 4 Ipp, Peak Current (A) 60 40 20 8 6 4 2 0 0 0 2 4 6 8 10 12 0 IF, Forward Current (A) 1 2 3 4 5 6 VR, Reverse Voltage (V) REV:C Page 2 QW-BP013 Comchip Technology CO., LTD. ESD Protection Array Reel Taping Specification d P0 P1 T E Index hole F W B C P A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed SOT-23-6 SOT-23-6 SYMBOL A B C d D D1 D2 (mm) 3.17 ± 0.10 3.23 ± 0.10 1.37 ± 0.10 1.55 ± 0.10 178 ± 1 50.0 MIN. 13.0 ± 0.20 (inch) 0.124 ± 0.004 0.127 ± 0.004 0.054 ± 0.004 0.061 ± 0.004 7.008 ± 0.040 1.969 MIN. 0.512 ± 0.008 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0.22 ± 0.05 8.00 ± 0.30 14.4 MAX. (inch) 0.069 ± 0.004 0.138 ± 0.002 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.009 ± 0.002 0.315 ± 0.012 0.567 MAX REV:C Page 3 QW-BP013 Comchip Technology CO., LTD. ESD Protection Array Marking Code 6 Part Number Marking Code CSRS065V0-G 5V4 5 4 5V4 1 2 3 Pin1 Suggested PAD Layout SOT-23-6 SIZE (mm) (inch) A 1.10 0.043 B 0.60 0.024 C 0.95 0.037 D 2.50 0.098 E 3.60 0.142 C A D E B Standard Packaging REEL PACK Case Type SOT-23-6 REEL Reel Size ( pcs ) (inch) 3,000 7 REV:C Page 4 QW-BP013 Comchip Technology CO., LTD.