RFID smart Gateway for Home automation control ECF2100 Features ▓ Two way monitor HOST: -> Over 40 billion unique HOST ID -> Compatible with FAVEPC RC Air interface protocol -> RFID pairing mode(optional) ▓ One way control HOST: ->Compatible with FAVEPC RC Air interface protocol ->Unique ID for RC ->RFID pairing mode(optional) GENERAL DESCRIPTION ECF2100 is designed as RFID smart gateway for home automation control system, usually controlled by Smart phone, Tablet PC and notebook using WIFI technique. Our advance technology delivers small, reliable, easy to design and cost-effective Home automation solution. This smart hub is not only support uni-direction system but also support bi-direction system. ABSOLUTE MAXIMUM RATINGS Parameter Symbol Conditions Max storage temperature TSTOREmax +120℃ Min storage temperature TSTOREmin -60℃ Power supply voltage VIN -0.1V to +5.5V Electrostatic discharge VESD 1KV Recommend Operating Conditions Parameter Power Supply voltage Symbol Min. VIN Max. 5 Operating Temperature Ta 0 Storage Temperature Ts -40 E-CMOS Corp. (www.ecmos.com.tw) Typ. Page 1 of 5 - Unit V +40 ℃ +85 ℃ 5D20N Rev. F001 RFID smart Gateway for Home automation control ECF2100 ELECTRICAL CHARACTERISTICS AC Electrical Characteristics for Receiver Parameter RF Input frequency Sensitivity Symbol (Ta =25℃, VIN =5V, VSS = 0V) Min. Typ. FC Pref Max. Unit 433.92 MHz -105 dBm Receiver Set up Time TRF_OUT 0.02 ms Receiver Bandwidth FBW 0.05 MHz 5K bps Receiver data rate DRate Modulation ASK AC Electrical Characteristics for Transmitter Parameter RF Output Frequency RF Output Power RF Transmission setup time RF Frequency error Interrogator Transmit Spurious Symbol (Ta =25℃, VIN =5V, VSS = 0V) Min. Typ. Max. Unit Fc - 433.92 - Mhz Pout -8 - 6 dbm TRF_OUT - - 0.5 ms - - 1000 ppm Ferror In accordance with local regulations - In accordance with local regulations - RF Bandwidth In accordance with local regulations - Transmit data rate for one way O_DRate Emissions, In-Band Interrogator Transmit Spurious Emissions, Out of-Band - 1: 0: Transmit data rate for two way T_DRate - 1: 0: Modulation - bps - bps 1K 4K 2K ASK Modulation Type E-CMOS Corp. (www.ecmos.com.tw) 2K PULSE MODULATION Page 2 of 5 5D20N Rev. F001 RFID smart Gateway for Home automation control ECF2100 DC Electrical Characteristics (VIN =5V, VSS= 0V) Parameter Symbol Min. Typ. Max. Unit Average operating current IOC - 400 - mA Standby current ISB - 160 Peak current mA - Ipeak 800 mA WIFI Electrical Characteristics Parameter Symbol Min. RF Output Frequency Fc 2402 RF port output Power Pout 13 Typ. Max. Unit 2483 MHz - dbm Receiver Sensitvity -70 dbm RF frequency Calibration 10 KHz Number of channel Modulation Type CH_America 11 CH_Europe 13 802.11b:DSSS M_type 802.11g:OFDM ANT Type 1 PCB ANT ANT Gain Peak：2.13 dbi Security WEP 64/128、WPA、WPA2、WAPI System Characteristics Parameter Interface OS system Description IEEE 802.11b/g/n Android/iOS WIFI link range 10 meter base on free space Control range 20 meter base on free space RF regulations FCC, NCC, CE Input Power 5V micro USB E-CMOS Corp. (www.ecmos.com.tw) Page 3 of 5 5D20N Rev. F001 RFID smart Gateway for Home automation control ECF2100 OUTLINE DESCRIPTION E-CMOS Corp. (www.ecmos.com.tw) Page 4 of 5 5D20N Rev. F001 RFID smart Gateway for Home automation control ECF2100 Mechanical Characteristics E-CMOS Corp. (www.ecmos.com.tw) Page 5 of 5 5D20N Rev. F001