IVO FD270.020C5B7 Totalizers electromechanic Datasheet

Totalizers electromechanic
Impulse counters adding, imprint on card
Display 5- or 6-digits, manual reset by lever
FD270
Features
–– Large pulse counter
–– Adding
–– Display 5- or 6-digits
–– Imprint of the measured result on card, paper stripes
or labels
–– Manual imprint, reset and ink ribbon transport by
reset lever
Technical data - mechanical design
Voltage supply
115 VAC ±10 % (60 Hz)
230 VAC ±10 % (50 Hz)
24 VDC ±10 %
Display
White numbers on black
Number of digits
Ripple residue
<48 %
5-digits
6-digits
Nominal frequency
50 / 60 Hz
Digit height
7 mm (numeral readout)
3 mm (printed numerals)
Current consumption
≤600 mA
Count mode
1 impulse = 1 count
Power consumption
14 W, 20 VA
Step-by-step switching
Adding in whole steps
Pulse ratio
1:1
Measuring range
99 999 and 999 999
Approval
CE conform
Reset
Manual by reset lever
Imprint
With lever, without reset
By lever upon reset
Card thickness
≤0.3 mm
Card width
85...0 mm
Ink ribbon transport
Manual by knurled knob
Operating temperature
0...+60 °C
Storing temperature
-20...+70 °C
Relative humidity
80 % non-condensing
Protection DIN EN 60529
IP 41
Housing type
Housing with ground plate
E-connection
Cable gland PG 9
Mounting
Surface mount housing
Dimensions W x H x L
237 x 152 x 113.5 mm
Weight approx.
3500 g
Material
Aluminium die cast alloy
1
www.baumerivo.com
30/10/2008
Technical data - electrical ratings
Subject to modification in technic and design. Errors and omissions excepted.
FD270 - Impulse counter
Totalizers electromechanic
Impulse counters adding, imprint on card
Display 5- or 6-digits, manual reset by lever
FD270
Part number
Connection diagram
FD270.
-(+)
A5
A7
C1
B7
010A
020C
Voltage
+(-)
Display
5-digits 9999.9
5-digits 99999
6-digits 999 999
6-digits 99999.5,
count mode 0-5-0-5
Encoder
Trigger level
Voltage
24 VDC ±10 %
Voltage
1 24 VDC
5 115 VAC / 60 Hz
6 230 VAC / 50 Hz
Power
14 W
Nominal current
600 mA
Resistance
38 Ω
Imprint / reset
Imprint and reset operation parallel
Imprint and reset operation separate
Voltage
115 VAC ±10 %
Power
20 VA
Nominal current
180 mA
Resistance
50 Ω
Voltage
230 VAC +6/-10 %
Power
20 VA
Nominal current
80 mA
Resistance
290 Ω
Dimensions
150
2
www.baumerivo.com
Subject to modification in technic and design. Errors and omissions excepted.
92
237
30/10/2008
117
113.5
125
118.5
90°
Similar pages